9mm and .40 Chronograph data


PDA






Bovice
December 12, 2011, 12:30 PM
I used my chronograph yesterday to check PFs on my 9mm and .40 loads. If you're looking for something that works in these calibers, try this.

9mm 124 grain Montana Gold FMJ
4.3 grains of Titegroup
1.145 OAL
1090 FPS out of a 5" barrel, PF=135

.40 S&W 165 grain Montana Gold FMJ
5.3 grains of Universal
1.125 OAL
940 FPS out of a 4" barrel, PF= 155

Both loads will hit exactly where you aim them at 15 yards. I've shot the .40 load at about 50 and it seems spot on there as well.

If you enjoyed reading about "9mm and .40 Chronograph data" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
gamestalker
December 12, 2011, 09:01 PM
I'm loading those two with Longshot. Velocity is slightly higher and accuracy dead on as well. Give it a try, or HS6 too.

HS6 and Longshot are slower burning powders and very easy to work with. I don't have to deal with sudden pressure spikes when I get near the top.

1SOW
December 12, 2011, 10:09 PM
MG 124 CMJ Vit N320 4.20 1.133 1032'/sec 128.0 PF, Bingo-good accurate groups

If you enjoyed reading about "9mm and .40 Chronograph data" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!