Dumb Mauser question


PDA






offthepaper
December 30, 2011, 12:50 PM
Recently someone gave me a very nice sporter stock that came off of a sporteized K98.
I have an old Yugo M48 mauser that is fairly beat up on the stock. I have been thinking about using the YUGO for a sporter project using the recently acquired stock, but I'm not sure if these rifles would be able to interchange stocks from a K98 to a M48.
Does anyone know what models of mausers would fit the same stock as a
K98?
I hear about "large ring and small ring" mausers.
Which ones are small ring and which are large?

If you enjoyed reading about "Dumb Mauser question" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Vaarok
December 30, 2011, 01:18 PM
Your bigger problem is the M48 is an intermediate length action, though as I recall the action screws are the same distance as a '98 in some- it might just be the 1903 Turkish, though. Ring diameter has to do with barrels.

lonniemike
December 30, 2011, 01:20 PM
I don't recall the exact measurement to thousanths, but a small ring is a little over 1.3" in dia at the reciever and the large ring is a bit more than 1.4". No help on the stock.allthebest

303tom
December 30, 2011, 01:52 PM
Two examples, Large Ring & Small Ring.........

Vern Humphrey
December 30, 2011, 02:03 PM
Ask the gun -- takle the M48 out of the stock and see what you would have to do to fit it into the '98 stock.

Float Pilot
December 30, 2011, 02:40 PM
The M-48 Yugoslavian Mauser is a large Ring, intermediate length action.

1.410 diameter. receiver ring, 8.50 in length, with screw spacing of 7.620
Intermediate Large ring have a threaded shank diameter of 1.10 in. With 12 threads per inch.
Mexican Mauser made by FN , the M24, M47, M48 by FN and Yugoslavia. It WILL NOT fit a Standard 98 Mauser stocks and standard bolts will not interchange..

The Standard Large Ring M-98 Mauser
1.410 diameter receiver ring, 8.750 in length, with screw spacing of 7.835. Barrel Shank of 1.100
Large ring have a threaded shank diameter of 1.10 in. With 12 threads per inch.
Including M-98's from WWI and WW2, GEW-98,M-98k, CZ-24, Czech VZ-24, Spanish M-43/44 . Chilean M1912, Steyr Brazilian M1908/34, Brno 98/22, 98/29, DWM / Argentine. M1909, M24/30 Venezuelan, FN M1935 Peruvian, FN Standard Model, Mauser Oberndorf.

crazysccrmd
December 30, 2011, 03:12 PM
Go with a Boyds stock, they are great. If you have a M48/A/B then it will not fit a standard 98 stock. If you have a M48BO then it might since I think those were rebuilt off of captured German K98s with a full length action.

http://www.boydsgunstocks.com/Replacement-Stocks-for-Mauser-s/8.htm

Here's my M48 in a Boyds stock, with handloads shooting off the bipod in the prone it shoots MOA or better. Forgive the metal finish, I still haven't decided between trying to duracoat it myself or have my gunsmith parkerize it.

http://i73.photobucket.com/albums/i238/crazysccrmd/1203111733a.jpg

Kliverson
May 17, 2012, 02:59 PM
I learned a good bit about the specifics of ring size and all that from: http://www.turkmauser.com/largeRingSmallRing.aspx

A great site for Mausers in general.

If you enjoyed reading about "Dumb Mauser question" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!