Load request for 9mm using lead plated bullets


PDA






littleguns223
December 31, 2011, 04:15 PM
I will be reloading for the XD 9mm using Berrys 124gr RN lead plated bullets.I will be using HP38 powder. Does anybody load for the XD9mm using this powder and bullets? Thanks.

If you enjoyed reading about "Load request for 9mm using lead plated bullets" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
December 31, 2011, 04:20 PM
Berry Bullet FAQ:
http://www.berrysmfg.com/faq-q9-c1-How_do_I_load_Berrys_Preferred_Plated_Bullets.aspx

I load that bullet with 5.0 Unique seated 1.120" for my sons XD compact, and my S&W 39 and SIG P6.

rc

dnmccoy
December 31, 2011, 04:23 PM
I use 4.2 of W231 under our 124's

ChuckB
December 31, 2011, 05:14 PM
4.3 gr. of HP38/Win231 behind Berry's 124gr. RN. Works for me.

Chuck

GLOOB
December 31, 2011, 08:43 PM
I use the 124 gr FP HB in my Glock 19.

HP-38: 4.8gr
Unique: 5.4 gr

Duckdog
January 1, 2012, 10:36 AM
Use lead bullet data and you're good to go. They used to say that on their site, but I have not looked in many moons.

Walkalong
January 1, 2012, 10:41 AM
http://www.thehighroad.org/showpost.php?p=6195350&postcount=11

Some good load suggestions so far. HP-38/W-231 is a good choice. I just ordered another 1K of the Berrys 124 Gr HBRN from TJConeveras (http://www.tjconevera.com/berrys-bullets.html). It shoots great in 9MM and .38 Super. I shoot it at 1300 FPS in the .38 Super.

4895
January 2, 2012, 11:07 AM
6.4 grains of Bluedot @ 1.150".

shooter_from_show-me
January 2, 2012, 11:33 AM
http://www.thehighroad.org/showpost.php?p=6195350&postcount=11

Some good load suggestions so far. HP-38/W-231 is a good choice. I just ordered another 1K of the Berrys 124 Gr HBRN from TJConeveras (http://www.tjconevera.com/berrys-bullets.html). It shoots great in 9MM and .38 Super. I shoot it at 1300 FPS in the .38 Super.
Just a FYI that Powder Valley sells @ $14/1k less than your supplier. Just trying to save you some $$$ there Walkalong.

Bill

BTW, I use the same 124gr HBRN-TP with 4gr of Titegroup seated @ 1.13" with good results out of my CZ's.

bds
January 2, 2012, 11:55 AM
Just a FYI that Powder Valley sells @ $14/1k less than your supplier. Just trying to save you some $$$ there Walkalong.
PV has been out of stock for 124 HBRN-TP bullet (which has been shooting more accurate than my jacketed reference load). TJ Coneveras pricing includes shipping, so if you factor shipping cost for PV, it is $1-$2+ lower per thousand IF they are in stock. :D


BTW, I use the same 124gr HBRN-TP with 4gr of Titegroup seated @ 1.13" with good results out of my CZ's.
Yes, Bullseye and Titegroup produced 1"-1.5" shot group at 15 yards off hand for me out of Glock - http://www.thehighroad.org/showthread.php?p=7266869#post7266869

If you enjoyed reading about "Load request for 9mm using lead plated bullets" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!