12 dollar ar10 trigger work


PDA






fol4321
January 6, 2012, 02:30 AM
i switched the springs (3 each) out in my dpms 308 sportical with the jp enterprises yellow sping kit. took about 10 min with a cleaning also while the trigger was out. i used the electronic pull gauge at work which we just got back from pmel. i work at an air force base on the ejection systems so the tool is accurate. went from a 8.3 to a 3.7 pull. did 3 of each before and after. also got a set for my m&p 15-22. cheap easy and well worth it. dont have pics but i could redo it if someone needed me to for a visual.

If you enjoyed reading about "12 dollar ar10 trigger work" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
jpwilly
January 6, 2012, 12:09 PM
thats a big difference and provided you get consistant ignition...a great inexpensive way to upgrade the stock DPMS trigger springs.

nyc71
January 8, 2012, 05:13 PM
All it took was to replace the springs?


"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety"- Benjamin Franklin

fol4321
January 8, 2012, 08:10 PM
http://www.brownells.com/.aspx/pid=7582/Product/AR-15-REDUCED-POWER-SPRING-KIT


yep just the springs replaced. i just did my m&p 15-22 pull is around 4.3. i ran about 300 rounds through it yesterday and no misfires. but i reload my 308s and i dont use wolf primers.

greyling22
January 8, 2012, 08:47 PM
now run a set screw up the under the back end of the trigger bar via the grip screw hole and reduce your takeup and creep to finish the job

fol4321
January 9, 2012, 12:18 AM
already c/w

nyc71
January 9, 2012, 01:11 AM
I'm gonna order a set tomorrow.


"They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety"- Benjamin Franklin

If you enjoyed reading about "12 dollar ar10 trigger work" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!