reload Data for 380ACP Bullseye, 100grfmj


PDA






Didereaux
February 16, 2012, 09:02 PM
Hope this is not a repost. I recently did some test loads using Bullseye and Berry's 100gr FMJ. Here's the results
http://dl.dropbox.com/u/12009366/380ACP%20Load%20Data.jpg

If you enjoyed reading about "reload Data for 380ACP Bullseye, 100grfmj" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Robert101
February 17, 2012, 05:36 PM
Very nice. Thank you so much for the data. Good post on the .380.

benzuncle
February 17, 2012, 11:50 PM
I load 3.2gr of Bullseye behind 102gr Remington Golden Sabers. So I'm in "your ballpark" with the 100gr Berry's.
Thanks for sharing your info.

ssyoumans
February 18, 2012, 01:27 AM
2.8 gr of Bullseye is my standard load with the Berrys bullet, it gets me 782 fps out of my SIG P238. It functions down to 2.3gr of BE.

I also shoot a lot of MBC 95gr LRN. 3.0gr does 829 fps

Another good powder for 380 is W231. 3.5gr with the MBC 95gr does 883 fps. All of these loads are still under factory SD loads. It in line with 95gr FMJ factory loads.

The SIG has a shorter barrel than your Bersa.

fecmech
February 18, 2012, 01:44 PM
I load 3.6/BE and a Ranch Dog 100 gr RNFP in my Keltec P3AT, gives an even 900 fps.

If you enjoyed reading about "reload Data for 380ACP Bullseye, 100grfmj" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!