CDNN S&W 5906 or 6906


PDA






jimbombo
February 19, 2012, 09:52 PM
Good evening folks.
Anyone purchased either of these firearms from CDNN either the S&W 5906 or the 6906? I know both firearms are well worth the money but what experiences have you guys had with CDNN?? Both firearms are good to very good, i believe the 5906 is $299 and the 6906 is $329 and then they offer select on both firearms for $30 more. Select means comes with S&W box don't know if the condition is any better.

Anyone purchased one of these from cdnn? What kind of shape??

Opinions?

Thanks
Jim
p.s. I have handled both and do like them!!!

If you enjoyed reading about "CDNN S&W 5906 or 6906" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Thor88
February 20, 2012, 03:05 PM
I am also considering one of these pistols and would like to know if there is much of a difference between the recoil of the two.

leadcounsel
February 20, 2012, 03:45 PM
I picked up 3 5906's from Wideners out of Tennesee. $275 each. Mechanically, they seem to be 90%+. Finish had some minor wear, light scratches. The plastic grips were destroyed though, on all 3. Not sure how. Will need replacing. Looked like they were just ground down with a dremel.

Not sure about the CDNN, but they are probably from the same source/police tradein.

Manson
February 20, 2012, 03:54 PM
Sorry Jim I have never bought a used gun from them. I have however bought several new guns from them and have always been happy with the results.

I wonder if for your extra select money they would be willing to email you a couple of photos of the one they select for you.

jimbombo
February 20, 2012, 08:32 PM
I will have to call them and see what diff select is from not, other than a case..

decisions, decisions...!! Do I want one of these Smith's or do I wanna use the money to begin my AR build...??? !!

jimbombo
February 20, 2012, 08:35 PM
Thor- I am sure the recoil is easier to handle with the 5906, it is about 10 oz heavier than the 6906, but being 9mm I am sure both are very easy to manage...

hawkeye10
February 20, 2012, 09:13 PM
:) I have bought several times from CDNN and they are first rate. You need not worry. Don

itchy1
February 20, 2012, 09:50 PM
I bought one of each from CDNN last Summer. Both were in very good to fine condition cosmetically and excellent mechanically--the 6906 looked virtually new inside. I enjoy shooting both guns but the 5906 just feels so right to me. If I could only keep one, it would be the 5906. I wouldn't hesitate to reccomend CDNN based on my experience.

carbuncle
February 20, 2012, 10:00 PM
I have both guns, though not from CDNN: the recoil is mild for both, but the 6906 is an alloy-framed carry gun while the 5906 is a steel-framed duty gun that I, personally, consign to HD and target use. If I could have only one semi-auto, I would choose the 6906 out of all the guns I've owned: perfect carry and range gun that is no slouch for HD. If I could have only one of the two, I'd choose the 5906: more fun to shoot for long periods, more capacity for HD, slightly longer barrel for improved accuracy.

harmon rabb
February 20, 2012, 10:14 PM
I have a 5906 from CDNN. It was in great condition -- seemed pretty much new but for a few scratches, and I didn't pay for a hand select. It is dead nuts reliable, and is the most substantial feeling pistol I have ever fired (and I personally own 30+ pistols). Well, maybe my GP100 feels *as* substantial, but that would be the only one.

Recoil is laughably low compared to other service 9's. And all service 9's have pretty sedate recoil imo. And the trigger... whoa. What in the world? At some point, smith actually knew how to make a decent autoloader trigger? What in the world happened? ;) Seriously, the trigger is easily on the par with the best Sig, H&K, or FN. Although I would argue better. It seems to have a shorter length of pull, a shorter reset than my Sig 226, FNX-9, and Beretta 92 clone, for example.

In conclusion -- hell yes, buy one. It is perhaps the finest all steel service 9mm you can buy. They don't make 'em like this anymore.

And you have reminded me that I should go buy a few more before CDNN runs out of them.

shooter1
February 20, 2012, 10:26 PM
Recoil? These are 9mm all steel pistols for crying out loud!
str1

harmon rabb
February 20, 2012, 10:30 PM
Recoil? These are 9mm all steel pistols for crying out loud!
str1
Yes, I know. Comparing the recoil of service 9's is like comparing mouse farts to rat farts.

dprice3844444
February 20, 2012, 10:58 PM
5906 stainless,6906 stainless over aluminum frame

Thor88
February 21, 2012, 02:19 PM
I am planning on getting the gun for my girlfriend, and I am trying to figure out if there is enough of a difference in recoil to justify the extra weight of the 5906.

I also plan to purchase mine from CDNN, so any extra info on their used guns would be great.

pharmer
February 21, 2012, 03:38 PM
If you buy the GF a 5906, you'll wind up with it. I have carried a 6906 daily for 18 years. Over 10K rounds with one failure, my son limp-wristed it when he was six and it caught the empty on the way out. Get one, she'll like it better. CDNN is one of the best wholesalers in the business. If you aren't happy, they'll make it right. Bought from them as an FFL (Pre 1995) and still do, although I can't get guns shipped to the house anymore. Joe

carbuncle
February 21, 2012, 06:46 PM
I agree, if it's for the GF go 6906: my wife likes the grip on the 6906 much more than the 5906.

Sent from my T-Mobile G2 using Tapatalk

harmon rabb
February 21, 2012, 10:02 PM
I am planning on getting the gun for my girlfriend, and I am trying to figure out if there is enough of a difference in recoil to justify the extra weight of the 5906.

I also plan to purchase mine from CDNN, so any extra info on their used guns would be great.
Honestly, they're both large 9mm's. Any large 9mm is going to have very minimal recoil. If the difference in recoil between a 5906 and 6906 would actually bother her, then I'd suggest you should be getting her something like a beretta cheetah (full size double stack 380) instead.

But she is never going to carry that 5906 anywhere, if that's your goal. It is one heavy ass gun. Makes a full size 1911 feel light. God, *I'd* never carry my 5906 anywhere unless it was my only gun, and if it was my only gun and I had no other money, I'd trade it for something lighter.

todd_g
February 21, 2012, 10:25 PM
Sorry I have only bought magazines for my 6906 from them. I bought my 6906 new in 1989, it went to S&W for a recall, other than that it has been the best pistol purchase ever, dead on accurate and malfunction free after many thousands of rounds, it also looks as nice as the day I bought, due to propper cleanings.

Thor88
February 22, 2012, 01:31 PM
Thanks guys, that's exactly the info I was looking for.

It's good to hear CDNN is good to work with, I think I'll go for the 6906.

On second thought, maybe I should buy the 5906 first so when it's too heavy for her I can buy both :evil:

Thanks again everybody

Onward Allusion
February 22, 2012, 02:46 PM
CDNN is a great company. Fast shipping and good customer service. As for the 5909/6906 - get one of each! Can't say enough good things about them. If they were still made today, they would cost the same as a new Sig. (heh, maybe even more if we're talking today's Sigs).

Hill_Country
February 22, 2012, 10:18 PM
CDNN is a class operation. Bought a 6906 from them about 6 months ago and it was in better than advertised condition. Looked like it had hardly been carried at all, no wear or scratches. Bore and mag well were pristine. Needed a good cleaning, but all new additions get that, anyway.

FWIW, they do enough business that they have many FFL's on file so all I had to do was tell them who to ship to. Couldn't be simpler.

Josh45
February 23, 2012, 12:44 AM
I never got to shoot the 5906, But I did buy 6906 and gave it to my dad. That gun, is a great shooter. Like the feel of it, And the recoil isn't bad at all. It has fed factory rounds and reloaded rounds without one hiccup what so ever.

I bought it used at the time but she functions perfectly. Would I buy it again? Yes.

Frankl03
February 23, 2012, 01:18 AM
I have bought several guns from CDNN. Great outfit, good prices as well!

TenDriver
February 23, 2012, 10:33 AM
I picked up 3 5906's from Wideners out of Tennesee. $275 each. Mechanically, they seem to be 90%+. Finish had some minor wear, light scratches. The plastic grips were destroyed though, on all 3. Not sure how. Will need replacing. Looked like they were just ground down with a dremel.

Not sure about the CDNN, but they are probably from the same source/police tradein.
If you're located near Huntsville, AL, JC's has a box of grips that look they're 5906 / 6906 grips for I think $12 ea. I only glanced at them so I could be wrong, but they're definitely Smith grips.

highorder
February 23, 2012, 12:05 PM
The plastic grips were destroyed though, on all 3. Not sure how. Will need replacing. Looked like they were just ground down with a dremel.


FWIW, I've seen quite a few Sig and S&W police guns like this. It looks to me like seatbelt buckle wear. I bought a Sig 226 with the right grip that was obviously constantly rubbing on the SB buckle when seated.

carbuncle
February 23, 2012, 08:17 PM
I have bought several guns from CDNN. Great outfit, good prices as well!

I just ordered a couple of 17-round mec-gar mags for the 5906 from them: very quick shipping. They have a full selection of mags for these guns, and Midway has the 20-round mec-gar mags in stock (for now) as well.

Sent from my T-Mobile G2 using Tapatalk

If you enjoyed reading about "CDNN S&W 5906 or 6906" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!