.357 Remington Maximum Brass?????


PDA






ngaither
April 16, 2012, 05:02 PM
Well I was hoping that a new supply brass was going to get made by Remington at the being of this year but i have seen none on come on the market. Is there another caliber that I could cut down to make some out of?

If you enjoyed reading about ".357 Remington Maximum Brass?????" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
April 16, 2012, 05:14 PM
No, not in this country.

A rimmed .222 Mag might be almost the right size, and it is loaded in Europe as the 5.6x50 Magnum.

But it would be real scarce & expensive here.

rc

ngaither
April 16, 2012, 05:43 PM
Well it was worth a shot. Thanks for the info

j. rap.
April 16, 2012, 05:57 PM
you could call starline brass but you would have to have a minimum order of 10,000 cases and they will cost extra to set up the tooling

243winxb
April 16, 2012, 06:02 PM
The factory may only make your brass once every 2 or 3 years. Wait for another production run.

rcmodel
April 16, 2012, 07:36 PM
If enough .357 Max shooters called Starline?
They would probably take the hint people want & need them, and make them better then Remington makes them.

rc

BinRat
April 17, 2012, 10:44 PM
Midway lists Remington 357 Maximum brass as a regular item. I just checked and they show it as out of stock, but listed as being available in July, 2012.

http://www.midwayusa.com/product/1601729225/remington-reloading-brass-357-maximum

The reason I knew they list them is because my friend across the street reloads them and I'd been checking around to see whether any were available anywhere online. He only has about 200 of them and was getting concerned about never being able to replace them as they wear out.

Reefinmike
April 17, 2012, 10:49 PM
A major vendor at bill good mans gunshow in Dayton oh had it in stock, new, pretty sure it was starling. Not sure if this helps any but it may get you started

ArchAngelCD
April 18, 2012, 02:52 AM
Never mind, out of stock...

ngaither
July 5, 2012, 09:52 PM
Just got the email. The brass is back in stock at midway for anyone who needs some.

Peter M. Eick
July 8, 2012, 11:47 AM
I just ordered 2000 pieces so I will have some stash sitting on the shelf. It has been about a year or so since it was in stock so plan accordingly.

jercon
July 14, 2012, 06:04 PM
They got the .357 maxium brass I got 500,and it was gone in 5 days!:what:

Fatelvis
July 15, 2012, 10:51 AM
Try Mike Bellm, he has brass in stock, and knows more about this cartridge than anyone. I had him rechamber a new 12" Contender barrel to 357 Max, and it is absolutely amazing on the 200 meter target and rams! 1"-2" 100 yard groups are typical with Hornady's 180 XTP, with several groups at 3/4"!!
http://bellmtcs.com/store/index.php?cid=121

Peter M. Eick
July 15, 2012, 11:27 AM
http://eickpm.com/picts/max_brass.jpg

I know where some is!


Where is that "happy dance" emoticon!

Now I have to clean up the current project on the press and have at it!

stonecoldy
July 15, 2012, 10:38 PM
Midway expects availability in mid September now of this year :(
Glad I have what I do.
As RCmodel said, send an email to Starline, I am. Love their brass.

stonecoldy
July 15, 2012, 10:46 PM
Natchez Shooters Supply, 50 ct for $14.49.

Clark
July 16, 2012, 07:27 PM
2000 pieces?

Shortages inspire hoarding.

After the primer shortage a couple years ago, I have seen a number of guys make lifetime buys.

ngaither
July 17, 2012, 10:44 AM
I got my 500 hunderd from Midway last week. :D

BinRat
July 17, 2012, 04:48 PM
It's back in stock at Midway.

I also noticed a couple of days ago that Midway had sold out of all their .357 Maximum brass, and it was before I got an order in. I was annoyed at myself for having waited a couple of days....never thought they'd be out of stock so quickly. The site initially indicated that it would be back in stock in June, 2013. A few days later, it indicated that it would be back in stock in Sept, 2012. I put myself on a notification list so they'd let me know when it was again in stock, and surprise.....2 days later, I get an email notifying me that it's back in stock. So, being afraid of missing out again, I put the order in quickly and will soon have that brass that I've been looking for for many months.

Peter M. Eick
July 17, 2012, 08:16 PM
Clark,

Not hoarding, just a couple of years supply. It has been roughly a couple of years since it was last produced. I have 3 Maxes to kept fed so I grabbed 2000 while I could. Considering at full power the brass does not last long, I figured this was a couple of years supply for me.

Clark
July 18, 2012, 03:16 AM
Peter, I have had 357 max brass for ~10 years and have yet to build a gun to shoot it.

Peter M. Eick
July 19, 2012, 08:41 PM
I usually get the gun first then set up for reloading it. I find the Max hard on brass when you go hot. I figure its a max so lets go for it.

Lot of fun to shoot one. You should get a gun to go with that brass!

Clark
July 20, 2012, 03:01 AM
I would not make a sloppy SAAMI chamber.
I'll bet I could make brass last.

Peter M. Eick
July 21, 2012, 05:10 PM
Agreed. I don't have that skill nor luxury. I just have to take what I can get in terms of chambers.

If you enjoyed reading about ".357 Remington Maximum Brass?????" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!