The vertical knob is easy to figure out: 1= 100, 2=200....Back to 1/2 for 50 and close to the stop pin to 25.
Can someone tell me how to move the horizontal knob according to distances considering no wind?
If you enjoyed reading about "Pu scope usage" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
April 26, 2012, 07:49 PM
I'm guessing this is in reference to the left offset of the scope above the bore?
I have a translation of the original Soviet Mosin Nagant manual issued to officers, and the section on sniping with a PU and making range adjustments has nothing about left/right changes.
April 26, 2012, 09:05 PM
Yes, this is related to that.
I checked with other types of soviet scopes ie posp scopes and no instruction is provided about lateral adjustments. Withbthe psl, they talk only zero at 200 with scope set to 2 or zero to 100 with scope set to 1.5 but it is vertical adjustments.
April 26, 2012, 09:17 PM
Something that might help that I've noticed:
When the rifle is level, the post in the PU is perfectly vertical, but the right side bar of the reticle is just a hair higher than the left. When the rifle is canted to level the bars, the scope is perfectly centered above the bore.