GI 1911a1: What's it worth?


PDA






highorder
July 24, 2012, 08:23 AM
I've got a 1944 Remington Rand 1911. It's in pretty good shape inside and out, and appears to be as issued (including a magazine, not pictured.) One exception; a blued commercial slide stop. The owner would like to sell it and needs help with a curio like this one. So, what's it worth?

If you enjoyed reading about "GI 1911a1: What's it worth?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
TonyT
July 24, 2012, 10:21 AM
I have not kept up with the prices of WWII 1911's. Normally the premium is for a gun in totally original condition. A large number of these guns were arsenal rebuilled and sold to NRA members in the late 1950's or early 1960's. As an aside, I believe that Remington Rand built more 1911's during WWII than all the other manufacturers combined.

highorder
July 24, 2012, 12:01 PM
This gun is all matching except for the slide stop. I mentioned it to the owner and he said he has a cigar box of old stuff somewhere. He suggested it might be in there? Either way, He's looking to sell.

What do you guys think the fair market price is?

rcmodel
July 24, 2012, 12:52 PM
This sold for $1,299 a month ago.

http://www.gunauction.com/buy/11139975/guns-for-sale-curios-relics/pistol-curios-relics/remington-rand-m1911a1-w-2f2-two-tone-mags-2c-holster-2c-belt-2c-pouches

The pair of two-tone mags could add $200-$250 to the value.
The holster & belt another $100 - $125.

SO I guess you could say $925 - $1000 for the gun alone.

rc

rklessdriver
July 24, 2012, 08:15 PM
That is a 1911 "undercut" slide stop which is as it should be (blued). In good condition that slide stop alone is worth $75-$150 if it's a COLT and could be worth alot more if it's a USGI Springfield Armory or Remington UMC mfgr.

As for the rest of it.

Looks like a correct (for 1944) Type 3 slide.

The feed ramp on the frame should be "in the white". Should have an 8 rib mainspring housing, serrated slide stop, checkered stubby hammer, and stamped trigger. It could have either a High Standard (HS) or Flannery Bolt (F) barrel depending on where the SN put's it being mfgr'd in 1944. Any USGI magazine is technically correct but as a Remington Rand it should have a "G" marked, welded back General Shaver magazine....

Your pics are horrible as far as evaluating the condition but I can still see wear on the sharp edges and a lot flattening of the checkering on the right grip....

A CORRECT Type 3 Remington Rand in the shown condition is about an $700-$850 gun IMO....

A correct slide stop is gonna cost about $50-$100 and it's gonna take a while to find one that matches up decent with the wear on the gun.

No serious or advanced 1911 collector is going to be interested in it because of the wear and wrong slide stop. However there is a buyer for everything and nostalgia running as high as it is right now it could fetch more than that from a less educated buyer.
Will

If you enjoyed reading about "GI 1911a1: What's it worth?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!