id 22mag cylinder


PDA






smoke sniffer
September 7, 2012, 09:10 PM
Looks h,r (649) has psf and badge stamp back face 22mag on side grateful for any
help.

If you enjoyed reading about "id 22mag cylinder" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
TennJed
September 7, 2012, 10:40 PM
Don't take this personal, just trying to help, but if you used better grammer and maybe posted some pics it would help

smoke sniffer
September 7, 2012, 11:18 PM
I know i know im workin on it. Im new to computers and gra
mar ha ha

Jim, West PA
September 7, 2012, 11:47 PM
It's from a Harrinton & Richards model 649.
If it's a .22 magnum cylinder then it's from a 649 convertable

smoke sniffer
September 8, 2012, 12:23 PM
Thats what it looks like but it doesnt fit the one i have. Im thinking of fitting it but want to be sure
its not someting else.

Remllez
September 10, 2012, 06:24 PM
How many holes are in the cylinder? If its 9 it's likely a H&R or High Standard, if it has slits/grooves from the charge holes out to the edge of the cylinder it's a High Standard, they were machined that way to allow dry firing without damaging the cylinder face.

smoke sniffer
September 10, 2012, 10:40 PM
there are 6 chambers and no slits or grooves. i thought it might be a hi standard . i have been looking for a hr 649 22 mag cylinder for awhile and thats what it looks like to me. but the one in question is just too big all around but to me it looks like it could be fitted . are the the another number models that could be close but diffrent . the holes match up the stop notches match up . the pivot bareing and ratchet are over sized. but the groves on the ratchet do line up.

smoke sniffer
September 10, 2012, 10:50 PM
there are 6 chambers and no slits or grooves. i thought it might be a hi standard . i have been looking for a hr 649 22 mag cylinder for awhile and thats what it looks like to me. but the one in question is just too big all around but to me it looks like it could be fitted . are the the another number models that could be close but diffrent . the holes match up the stop notches match up . the pivot bareing and ratchet are over sized. but the groves on the ratchet do line up.

RUT
September 11, 2012, 09:47 AM
>>but if you used better grammer<<

Do you mean "grammar"?

mlukasz
February 7, 2013, 01:33 AM
I have te same one- 22 MAG stamped on the side with the "PSF" letters and crossed swords on the face of the cylinder. Was a concensus ever reached as far as what kind/model of revolver this goes to?

303tom
February 7, 2013, 10:24 AM
I have te same one- 22 MAG stamped on the side with the "PSF" letters and crossed swords on the face of the cylinder. Was a concensus ever reached as far as what kind/model of revolver this goes to?
Ruger Single Six..............

BCCL
February 7, 2013, 12:59 PM
If it has "PSF" with crossed swords, it is NOT a Ruger Single Six cylinder.

351 WINCHESTER
February 7, 2013, 10:23 PM
British maybe, not American.

BCCL
February 7, 2013, 10:56 PM
Italian, that's an Italian proof mark.

If you enjoyed reading about "id 22mag cylinder" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!