[Keeperfaith]

I just bid on and won a used RCBS junior 2 single stage press from ebay. All I have are Lee producets including dies/shell holders.

Will Lee shell holders work in this press?


Thanks

Steve

[NeuseRvrRat]

yes

[Jeff H]

another Yes.

[Keeperfaith]

Cool thanks, I was hoping I wouldn't have to buy another set of shell holders!

Thanks again

[ArchAngelCD]

Yes but the Lee shell holders won't work in the RCBS hand primer. :cuss:

[rcmodel]

They work fine in mine.
Thats all I ever use in it.

Lee hand primer shell holders won't work.
But the standardd press shell holders do.

rc

[higgite]

Standard Lee shellholders won't work in a LEE hand primer.

ETA: Deleted a misleading statement. Thanks NeuseRvrRat for catching it.

[whtsmoke]

then again standard lee shell holder for a hand primer wont fit in my original lee hand primer:D

[NeuseRvrRat]

Standard Lee shellholders won't work in a LEE hand primer. They will work in a RCBS hand primer.

have you ever tried Lee shellholders on an RCBS hand primer? my Lee shellholders won't fit on my RCBS hand priming tool without a lot of cussing, fussing, nudging, beating, hammering, etc. they do not have enough radius on the edge around the bottom hole of the shellholder. RCBS shellholders fit great. i guess i could use a die grinder or something to radius that hole on the Lee shellholders.

[higgite]

My bad. I believe I probably did use RCBS shellholders on my old RCBS hand primer, not Lee shellholders. Thanks for catching that. That primer is gone, replaced with the universal model.

[mdemetz]

Will Lee shell holders work in this press?
I think all brands of modern shell holders fit all brands of modern presses. There may be differences in thickness and the primer hole diameter.