Would like lighter trigger on my Sig C3.


PDA






mach1.3
October 4, 2012, 02:19 PM
Anybody have experience doing a trigger job or replacing the trigger on this Sig?
Is polishing the sear etc. enough to smooth and lighten the pull vs. replacing the trigger? Any info would be appreciated.

Also which holster seems to be the most acceptable for CC.

If you enjoyed reading about "Would like lighter trigger on my Sig C3." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
IMTHDUKE
October 5, 2012, 06:08 PM
Sig will do it for $179....you pay shipping.

I thought about it, but for defense gun, I want some take up in the trigger. With that said, a good 4lb trigger is nice. My Eddy Brown trigger makes me look like a top shot.

railroader
October 5, 2012, 08:50 PM
Try a different sear spring and a 19lb. hammer spring. Cylinder and slide make a sear spring that will reduce your trigger pull. http://www.midwayusa.com/product/188154/cylinder-and-slide-sear-spring-1911 I have a the 19lb. mainspring with a kimber sear spring in my xo and the trigger is about 4lbs. or a little less. My trigger broke cleanly but the pull was heavy.

Jed Carter
October 5, 2012, 08:53 PM
I started doing my own 1911 trigger work from watching YouTube vids, bought an Ed Brown sear jig, some Arkansas stones and brass punches from Brownell's for about $80. W.C. Wollf springs, sear and main springs and got busy on some of my 1911s. I have a SIG RCS CCO sized 1911, it took virtually no stoning, smooth as a babies butt, just adjusted the sear spring tension on the sear and disconnector. First try, no creep, clean break at 2.2#s, toooo light for a carry piece, about 30 min later (the series 80 style levers are a pain to reassemble) and I have a 3# trigger. What can go wrong, ruined sear, hammer, sear spring, all can be replaced. If you are not comfortable completely disassembling your pistol then this is probably not a good idea. Cost of having someone skilled doing the work $150-200. Usually carry my RCS in an old Galco pancake hoster for a SIG P239, while on my belt it holds the pistol very securely, but when you take it off the pistol fits very loose. With the SIG slide it doesn't fit the average 1911 holster.

If you enjoyed reading about "Would like lighter trigger on my Sig C3." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!