marlin model 39-A golden


PDA






southern hunter
October 7, 2012, 10:38 AM
very hard trigger pull.is there a way to reduce to 2-3 lbs? is there a diagram showing how to do it? it is my squirrel gun and trigger pull creeps and feels like 8-9 lbs.thanks,for any help

If you enjoyed reading about "marlin model 39-A golden" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
October 7, 2012, 12:20 PM
It would require stoning the trigger & hammer square with each other and polishing the engagement surfaces with a fine stone.

Best accomplished with a sear jig, as it is very difficult to maintain the exact angles you need without one.

http://marauder.homestead.com/files/Marlin_Sear.htm

I assume you have neither the tools or any experiance doing trigger jobs, or you wouldn't have ask the question.

So I'd suggest you find a gunsmith to do it.

rc

45_auto
October 7, 2012, 06:02 PM
How many times do you have to post about it before you figure out that the answer is "NO" unless you're an experienced gunsmith with the proper tools, in which case you wouldn't be posting about it here.

http://www.thehighroad.org/showthread.php?t=679978

ApacheCoTodd
October 8, 2012, 12:32 AM
I see it's only his second post and like some, may have lost track of the previous.

My experience with the both of mine has been that a thorough and proper cleaning went a long way towards improving the nasty triggers on each of them.

If you enjoyed reading about "marlin model 39-A golden" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!