Praise for the Gp100


PDA






Tony_the_tiger
November 15, 2012, 06:58 PM
I just returned from a range session with my KGP-141 Ruger Gp100.

This was my first firearm. It's accurate, powerful, heavy, reliable, and ruggedly handsome. It is my dedicated woods carry piece that has been up and down the Great Smoky Mountains, the Rocky Mountains, and the Southeast. I carry it strong-side OWB at 2:30 - 3:00 with a Simply Rugged Sourdough Pancake. It has a little over 2000 rounds through it.

Today I shot Speer Gold Dot 125 grain .357 JHP rounds, Buffalo Bore 180 grain Heavy .357 Hardcast Lead, Underwood Gold Dot 158 grain .357 JHP rounds, and Corbon Hunter 200 grain .357 Hardcast Lead. Amazingly, all are around the same point of impact using factory sights that have been sighted in to my liking.

I got a kick out of installing the Wiley Clapp special edition grips onto the 4" frame.

http://i978.photobucket.com/albums/ae269/kiwirat33/gp1.jpg

Please share your GP100 and SP101 photographs and stories.

If you enjoyed reading about "Praise for the Gp100" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
jungle
November 15, 2012, 07:13 PM
I like the GP100/SP101 family very much, all have had some minor trigger tweaking and offer a very smooth DA and SA trigger. Perhaps not as pretty as some S&Ws they offer a very well designed and built revolver that is without a doubt one of the toughest ever built.

http://i237.photobucket.com/albums/ff249/jungle375/9641c114.jpg

PaisteMage
November 15, 2012, 10:09 PM
Getting the six inch in two months time.

I do like that wiley clap grip!

After that is a wheelgun in 45 colt. Can't decide on Blackhawk, Vaquero or a non ruger...

Leadhead
November 15, 2012, 10:36 PM
Nice grips?
Where and how much come to mind..... :)

ColtPythonElite
November 15, 2012, 10:38 PM
Sharp grips.

highpower
November 15, 2012, 10:49 PM
I only have one GP100, but it is a very good shooting gun and I like it a lot.

http://highpower.smugmug.com/Firearms/Ruger/i-79kNTZm/0/XL/IMG_0436-XL.jpg

groundsclown
November 16, 2012, 03:42 PM
Mmm, mm, mmmm. Love me some GP100:D:D:D

http://i1126.photobucket.com/albums/l613/groundsclown/gp100.jpg

lowercase
November 16, 2012, 04:01 PM
I'm a big fan of the fixed-sight 3" model.

http://imageshack.us/a/img19/2550/gp100forumpic.jpg

In fact, I like them so much that I bought a second one when i found it languishing in the used counter at my LGS for a good price.

http://imageshack.us/a/img689/9812/bothgp100s.jpg

HKGuns
November 16, 2012, 04:35 PM
Mine is great.

http://hkguns.zenfolio.com/img/s3/v25/p1249019476-5.jpg

lobo9er
November 16, 2012, 05:05 PM
Anyone taking theres out for deer this year?

OregonJohnny
November 16, 2012, 05:41 PM
If I had to narrow my entire handgun collection down to 1 gun for the rest of my life (GASP!), my 4" stainless GP100 would be in the top 2 or 3 choices. I can't really think of a more versatile revolver, no matter how hard I try.

My GP100 started out as my dad's back in about 1989 or 1990, so I grew up shooting it. It's like an old friend. I have carried it camping, hiking, and deer hunting as a backup. It's kind of the "Goldilocks" of outdoor handguns - it's just right (for about 95% of all needs). It's also been a trusted home defense gun for my wife when I'm out of town.

It's also my favorite gun for breaking in a new shooter, using light .38 Special loads. Makes it feel like a .22, and newbies seem more comfortable learning on a revolver rather than a semi. I like to have them put a few cylinders full of .38 through it, then have them step up to 125-grain .357. Nothing beats that "smack-you-in-the-nose" concussion of a fast and light .357 round. It always gets a smile.

Rexster
November 17, 2012, 07:34 AM
Though I am more likely to actually carry my S&W Model 19 concealed these days, I love the GP100, and have several, with 3" to 6" barrels. The original factory grip, pre-Hogue, is absolute perfection in my hands.

MIL-DOT
November 17, 2012, 07:52 AM
Back during what I call The Great Assault Weapons Panic of '08, I sold a Romy AK for $600, and immediately went and bought a 6" GP100, which began my gradual shift away from AW's and towards guns that will likely be at the end of the coming bans,but I digress.... Anyway, this pistol is one of my most treasured toys. It's deadly accurate, has the tightest lock-up I've seen on any Ruger ( any tighter and it'd be a Python). It's an excellent pistol that all of my freinds love,too, especially with the Hogue cocobolo grips i now have on it. You just can't go wrong with these things.

PO2Hammer
November 17, 2012, 10:19 AM
If I had to narrow my entire handgun collection down to 1 gun for the rest of my life (GASP!), my 4" stainless GP100 would be in the top 2 or 3 choices. I can't really think of a more versatile revolver, no matter how hard I try.
Yup, me too.
My 4" GP is a new gun and the quality is very impressive. Smooth bore, chambers and throats. Excellent DA stroke, good SA trigger that seems to be improving towards excellent. Shoots jacketed and lead well.
It is my proverbial "if you could only have one handgun" handgun.

bannockburn
November 17, 2012, 10:56 AM
lowercase

I really like the look of those 3" barrel fixed sight models. Seems like a great set-up, giving you a well balanced revolver with a decent length barrel for both open and concealed carry.

bannockburn
November 17, 2012, 10:58 AM
Delete-Double Post

Guillermo
November 17, 2012, 01:35 PM
Bill Ruger was a master at designing reasonably priced guns that delivered excellent value.

The GP100 is the personification of this

Hotshot10
November 17, 2012, 03:05 PM
I got a kick out of installing the Wiley Clapp special edition grips onto the 4" frame.

Where did you purchase those grips? They look sharp.

BigN
November 17, 2012, 06:12 PM
I praise my Ruger each time I handle it...

Rexster
November 17, 2012, 06:45 PM
I, too, would select a GP100 as my "only" gun, though I would have to turn back the clock to 1997 to "grandfather" the GP100 as a duty handgun, as my employer went all-DA-.40-autos for primary duty handguns at that time, though we could keep carrying our existing duty handguns by keeping the quals up to date.

The GP100 is quite heavy for a duty handgun, with all the other stuff we carry on our belts, but I could do it again. Off the clock, a GP100 is small enough to conceal, with just a bit of care in holster and cover-garment selection. The GP100 is an excellent field/woods gun, of course.

Deaf Smith
November 17, 2012, 07:02 PM
Well I do consider the 3 inch GP100 near the top of the line as for do-all revolvers.

http://www.thehighroad.org/attachment.php?attachmentid=139730&d=1301801899

Bit heavier than my Speed Six and S&W 65-3 Ladysmith but not alot.

I use magnums alot in the GP but not as many in my Speed Six and few in my Ladysmith.

And the GP, if it runs dry of ammo, makes a dandy club!

Deaf

RevDerb
November 17, 2012, 07:54 PM
Mine is great.

http://hkguns.zenfolio.com/img/s3/v25/p1249019476-5.jpg
Are you sure that's not mine? :)

http://i306.photobucket.com/albums/nn268/RevDerb/Handguns/NewGripsandHi-VizSights002.jpg

After viewing them side by side (or top by bottom) I guess not but there sure are some beautiful Jeeps on here. Thanks for the thread.

Anyone taking theres out for deer this year?
Absolutely; alongside my .30-06 Marlin bolt.

Tony_the_tiger
November 17, 2012, 08:55 PM
Thanks for the comments, photos, and stories :)

The Wiley Clapp grips come on the Wiley Clapp special edition GP100 as featured here

http://www.lipseys.com/itemdetail.aspx?itemno=RUKGP-33-NVK&items=talo

And reviewed here

http://www.gunblast.com/Ruger-GP100WC.htm

As far as I know, they are otherwise unavailable for purchase.

JTHunter
November 18, 2012, 01:00 AM
For about 6 months, I've been looking for a .357 to go with an SP101 in .38 Spec. that I may inherit (if I live long enough).

I have looked at the EAA "Windicator", a Rossi (back of trigger guard rubbed badly on 3rd finger's knuckle), a S&W 686, and the GP100, in a mix of 4" & 6" barrels. The longer barrels seemed to be a little too "nose heavy" but the 4" balanced much better. The 686 I looked at was priced at $770 (:what:) while a 4" SS GP100 was $570.

Then I found a blued 4" GP100 w/ adj. rear sight at a pawn shop, with no box or manual. According to Ruger's website, the gun was made sometime last year (2011), looks to be in excellent shape with Ruger rubber grips (no wood). The one "fly in the ointment" is the cylinder gap. This pistol has a gap between 0.008" and 0.009" and is big enough to let light through when viewed from the side.

My questions are:
Is this gap too big? (Ruger doesn't think so.)
Does anybody know how to shrink this gap w/o returning it to Ruger?
What would you consider to be a fair price for this piece?

Salmoneye
November 18, 2012, 08:24 AM
I like my KGPF-340:

http://i48.tinypic.com/o6znth.jpg

intercooler
November 18, 2012, 10:47 AM
They are pretty sweet!

http://i236.photobucket.com/albums/ff100/Intercooler2/2011-11-03004625.jpg

charlie fox
November 18, 2012, 11:35 AM
As a "usin' gun" I think a 3" stainless GP100 with fixed sights in 357 Magnum is about as close to perfect as they come:)

GP100man
November 18, 2012, 12:19 PM
JTHunter

While the cyl gap does seem on the loose end of the specs mine run from .006-.008"

I get a little spitting using max loads with heavy lead boolits & H-110 powder .
That said most revolvers will spit a little with max loads of a ball powder .

I feel a cyl gap of .006" with lead boolits is `bout as tite as I need being shooting lead is inherently dirtier more carbon/lead & lube build up than jacketed.

On another note it`s the nature of the beast so to say !

It is a major undertaking to lessen this measurement & should be done by compitent smiths ,if it spits very bad maybe a trip back to Ruger is warranted ???

Ask for a pick up box from Ruger ,ya never know till ya ask !
Shippin firearms is/can get expensive !!

GP:cool:

http://i746.photobucket.com/albums/xx110/GP100man/102_0333.jpg

http://i746.photobucket.com/albums/xx110/GP100man/102_1192.jpg

Jaymo
November 18, 2012, 09:54 PM
GP100man, what are those blue inserts? They look like denim "micarta".
I've thought about making some denim "micarta" for knife handles and grip inserts.

JTHunter
November 21, 2012, 12:25 AM
Thanks GP100man. You and Ruger seem to agree on the gap as they said range was 0.003"-0.009" and mine is about 0.0085".
As for it "spitting", that is why I posed the question. Very little of the ammo I put through that gun will be bare lead so that shouldn't be a problem. Most will be JHP or SJHP, SJSP (aka SJFP), or FMJ.
Thanks for the info.

Hondo 60
November 21, 2012, 12:02 PM
My Buddy has a blue 3" with fixed sights.
I keep asking him to sell it to me, but he likes it too much.

Maybe if I outlive him, he'll leave it to me in his will. ;)

MrDig
November 21, 2012, 12:17 PM
I like my GP100 161 so much I want a 141 but it's going to be a long while before I can start spending Money on Guns again.

GP100man
November 22, 2012, 08:11 AM
Yes there micarta blue jean material from 41Magnum !!

Needles
November 22, 2012, 08:33 AM
I got mine about 20 years ago at a gun show in Nashville. The Tennessee Highway Patrol had changed to semi-autos, according to the vendor. He had a table full of 4" stainless GPs. I started looking at them (they all looked new), and the 3rd or 4th one looked brand new-- it had dust in the barrel. I paid $250. The OEM grips are pretty, but feel a little thin side-to-side. I got some Hogue grips in black rubber, and it felt just right. It's the best shooting handgun I have ever owned, not counting the Contender. It's the only gun I own with a name (M'Gun.)

If you enjoyed reading about "Praise for the Gp100" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!