Pics of your...


PDA






josiewales
November 25, 2012, 10:34 AM
Lets see pics of your 10/22s! Specially if they're customized!

If you enjoyed reading about "Pics of your..." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Loosenock
November 25, 2012, 10:52 AM
Here's mine.

10/22 CRR with Weaver 2x7 scope in Leupold mounts, Kidd trigger and homemade leather mag pouch for two xtra mags.

http://i6.photobucket.com/albums/y220/loosenock/ruger1022002.jpg

loose

Mr.Revolverguy
November 25, 2012, 12:01 PM
Custom on the 10/22 Platform.

http://www.dayattherange.com/weapons/UltimateCZShootOff7.jpg

Did some ammo testing here along side a cz452
Ammo Testing (http://www.dayattherange.com/?p=2384)

v8stang289
November 25, 2012, 12:13 PM
Simple carbine with tech sights and a GI sling.

http://i249.photobucket.com/albums/gg214/v8stang289/ruger1022.jpg


I changed it up a couple of days ago. I cut the factory scope base in half and mounted the front half on the receiver. Then I mounted my primary arms reflex sight on the half base. It mounts/detaches quickly with its thumbscrew. I Put a few hundred rounds through it in that configuration yesterday and it works well and the reflex sight retains zero when removing and reinstalling. I prefer the tech sights for accuracy, but the reflex is fast.

http://i249.photobucket.com/albums/gg214/v8stang289/1022reflex.jpg

CraigC
November 25, 2012, 12:27 PM
Here's one I built from a Nodak receiver with an R/T accurized bolt, KID 2-stage trigger, 21.5" Clark mid-weight barrel, Boyd's tacticool stock, Tech Sights front sight in a Marbles base, Nodak rear sight with Tech Sights T200 module. In LTR mode with iron sights.
http://photos.imageevent.com/newfrontier45/rifles/large/LTR%2001.jpg

As a long range rig with a Bushnell Elite 10x in this shot.
http://photos.imageevent.com/newfrontier45/rifles/large/IMG_8118b.jpg


Here's my "tactical" that I built for midnight pest control. I flipped a VQ extended base backwards and machined it for clearance over the Tech Sights rear sight. T/S front has an 0.080" XS white stripe post. Drilled & tapped five extra holes to secure it and the rear sight. It currently wears a Vortex red/green Strikefire. There's a VQ hammer, PC bolt release, mag release and Superior Concepts bolt knob. The stock is a Tapco T6 with an extra forend rail, Magpul CTR and VFG. Sling is a V-TAC and light is a Surefire M4. I also finished it in Brownells' olive drab Aluma-Hyde II, which turned out beautifully and is holding up very well. It does everything I need it to and nothing I don't.
http://photos.imageevent.com/newfrontier45/rifles/large/IMG_9052b.jpg


I put one together for Dad last Christmas. It's a little simpler and began with a Ruger 10/22FS with the factory installed birdcage. Tapco T6, Tangodown foregrip, Primary Arms red dot, V-TAC sling and I also put a little Maglite XL50 on it. Shown with the rifle above with its original Tacstar T9.
http://photos.imageevent.com/newfrontier45/rifles/large/IMG_9022b.jpg

Magoo
November 25, 2012, 12:44 PM
Here's one of mine:
http://i58.photobucket.com/albums/g251/jrr1/22profile2.jpg

Modified factory stock- I added 2-inches to LOP, 1-inch to grip, and 1/2-inch to riser, flip flop butt pad, pillared and bedded, finished with bedliner. Green Mountain tapered fluted barrel, tuned bolt (by Que), Tech Sights, Kidd S.S. trigger and charging handle/rod.

Walkalong
November 25, 2012, 12:48 PM
Ruger 10-22 and Simmons 4X scope.
http://www.thehighroad.org/attachment.php?attachmentid=175269&stc=1&d=1353862027

CraigC
November 25, 2012, 01:22 PM
That's awesome, love it! :D

http://i58.photobucket.com/albums/g251/jrr1/22profile2.jpg

Magoo
November 25, 2012, 01:40 PM
Thanks Craig. Here's a link with a bunch of pictures of the "build" in progress: http://www.rimfirecentral.com/forums/showthread.php?t=424320

MachIVshooter
November 25, 2012, 01:52 PM
What happens with a free water-damaged rifle and a bored tinkerer:

http://i110.photobucket.com/albums/n117/Hunter2506/100_0528.jpg

hq
November 25, 2012, 02:28 PM
Here's a couple of old pictures of mine, nowadays it has a silver scope to match the stainless receiver.
Modified target stock, 2Żlb trigger, hand lapped OEM barrel, Caldwell composite bipod, fully suppressed and buffered. 1MOA accurate up to about 75 yards and it's whisper-quiet. Not exactly tacticool nor does it have many aftermarket parts, but nearly everything that's in it has been modified, polished and tweaked. And I love it.

http://eduskunta.com/1022-1.jpg
http://eduskunta.com/1022-2.jpg

josiewales
November 25, 2012, 02:34 PM
Very very nice! Want to get one of my own soon! Keep' em coming!

Offfhand
November 25, 2012, 03:33 PM
Of the half dozen or so 10/22's I've owned I guess my favorite is this old job with laminated stock, Shilen barrel and Kahles 2-7X RF scope in Talley rings. It shoots reasonably well too.

jmr40
November 25, 2012, 06:11 PM
The stock is a Hogue with a Cabelas barrrel. Everything else is factory.

http://i1129.photobucket.com/albums/m513/jmr40/018.jpg

Shoots pretty good too

http://i1129.photobucket.com/albums/m513/jmr40/017.jpg

Rembrandt
November 25, 2012, 09:31 PM
Volquartsen Sniper w/custom Pakkawood thumbhole.

http://img.photobucket.com/albums/v405/Rembrandt51/10-22f.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/Pakka2.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/Pakka3.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/VoquartsenSniper.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/Stock2.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/Stock1.jpg



Signed by the hand of "Moses".....
http://img.photobucket.com/albums/v405/Rembrandt51/heston1.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/heston2.jpg
http://img.photobucket.com/albums/v405/Rembrandt51/heston4.jpg

horsemen61
November 25, 2012, 09:35 PM
awesome guns guys

nipprdog
November 25, 2012, 09:49 PM
Lets see pics of your 10/22s! Specially if they're customized!

Lets see yours. ;)

M-Cameron
November 25, 2012, 10:09 PM
This thread is going to be hazardous to my wallet

there is already one setup i know for sure i am going to duplicate when i get some spare gun money :D

CraigC
November 25, 2012, 10:19 PM
The stock is a Hogue with a Cabelas barrrel. Everything else is factory.
Yeah, I think I might keep that one! ;)

cat_IT_guy
November 25, 2012, 11:02 PM
Not finished yet, but lots of fun. My wife has decided she wants one in pink...
http://i261.photobucket.com/albums/ii46/benatilstate/2012-11-04_19-45-35_523.jpg

VQ hammer, mag release, bolt release, and extractor.
BSA 3-9x40mm sweet .22 scope
Superior Concepts bolt handle.

taliv
November 25, 2012, 11:37 PM
www.thehighroad.org/showthread.php?t=238271

that is a thread from 2006. i was still hacked off at ruger back then over the gun ban stuff, so that project was basically to build a 10/22 without a single ruger part in it, for my daughter.

dubbleA
November 26, 2012, 12:01 AM
My beater/plinker 10/22
Ruger/Nordic/AAC

http://i49.photobucket.com/albums/f268/dubbleA/Nordic.jpg

zapVIII
November 26, 2012, 01:21 AM
Slightly warmed over trigger group. 2.5X Tasco scope.http://i1232.photobucket.com/albums/ff365/zapviii/100_0521.jpg

zapVIII
November 26, 2012, 01:28 AM
Lots of custom parts. More than I can remember. Shoots lights out though. I bought the Boyds Tacticool stock unfinshed, mixed the stain and finished with tung oil.
http://i1232.photobucket.com/albums/ff365/zapviii/100_0525.jpg
I have since stripped and polished the receiver but my camera broke before I could show off my work.

Dr.Rob
November 26, 2012, 01:36 AM
That mag pouch on the stock is slick! Well done!

I know this isn't a true 'custom', as it as a Ruger factory option.. still it's a neat set up. Ruger 10/22T twisted hammer forged stainless barrel, Tasco 6-24x target scope.

madcratebuilder
November 26, 2012, 08:33 AM
Here's mine.

10/22 CRR with Weaver 2x7 scope in Leupold mounts, Kidd trigger and homemade leather mag pouch for two xtra mags.

http://i6.photobucket.com/albums/y220/loosenock/ruger1022002.jpg

loose
Nice work! Very clean, I really like it.



There have been some killer sales on the take down model in my AO, need to go brave the crowds and get one. Like I need another 10/22.

International Model.
http://i32.photobucket.com/albums/d37/madcratebuilder/international02.jpg

A project from about 2004, GM barrel, Fagen stock Mueller APV in Talley rings and the rest is modified oem.
http://i32.photobucket.com/albums/d37/madcratebuilder/1022.jpg

Krinker kit in mall ninja dress.
http://i32.photobucket.com/albums/d37/madcratebuilder/PICT0001Medium-2.jpg

Jaxondog
November 26, 2012, 09:56 AM
I just got bored with the wood stock. Oh well, ii's never going to go anywhere so I played with it a bit.

http://i1159.photobucket.com/albums/p633/jaxondog102/Gunsandthings222.jpg
http://i1159.photobucket.com/albums/p633/jaxondog102/Gunsandthings221.jpg

josiewales
November 26, 2012, 10:30 AM
Lets see yours. I'm workin on it! :)

Reloadron
November 26, 2012, 10:50 AM
My super tacticool highly modified 10/22: :)

http://bearblain.com/images/22%20and%2044.png

Guess I should get around to taking another picture so it can appear solo.

Ron

josiewales
November 26, 2012, 01:56 PM
Guys I'm droolin".

defconskylude
November 26, 2012, 02:24 PM
10/22

I was getting some crazy muzzle blast. hahahahaha

AF9P70cbsv4

Red Tornado
November 26, 2012, 05:56 PM
Loosenock,
I can't see your picture. I want to check out the pouch, can you check it?
Thanks,
RT

josiewales
November 27, 2012, 10:49 AM
Nice guns guys! Keep em coming!

Ludlow Porch
February 16, 2013, 01:08 AM
Man a lot of customs on this thread and I like them all. Here is mine. Customized by MaddMacs' Precision Tactical. My first true Tac Driver! That one pic is an entire magazine, 9 rounds one hole, one flyer. Boyd's Tacticool Stock, ER Shaw barrel, Barska scope, Weaver mounts, Tactical Solutions rail. Action, bolt and trigger by Maddmacs'. Compensator is Maddmacs' latest and greatest.

179794

179795

179796

179797

josiewales
February 18, 2013, 01:01 PM
Golly Ludlow! That thing is really nice!

MCgunner
February 19, 2013, 11:55 AM
Just a Hogue stock.....

http://i42.tinypic.com/vooe2p.jpg

dubbleA
February 19, 2013, 12:18 PM
Mine is just a quiet plinking toy.

http://i49.photobucket.com/albums/f268/dubbleA/Nordic.jpg

GojuBrian
February 19, 2013, 12:30 PM
180026

180027

Love 10/22's

richie
February 19, 2013, 03:24 PM
Here's mine, top one a savage, bottom one ruger 10/22
http://i71.photobucket.com/albums/i136/riche_01/DSCF1340.jpg

josiewales
February 20, 2013, 07:51 PM
Where did you get that 10/22 stock richie?

savanahsdad
February 20, 2013, 08:12 PM
180094 180096

1972 ruger 10/22, Green Mountain barrel , Fajen thumb hole stock , and a ton of custom work, , this action was black , many hrs. at the buffing wheel

nipprdog
February 20, 2013, 09:03 PM
Lets see yours.

I'm workin on it!

Still waiting. ;)

Gtscotty
February 20, 2013, 10:02 PM
Here's my Squirrel hunting rig (minus the can.... until SB93 passes!)

Hogue OD stock
Power custom hammer and auto bolt release
PWS T3 carbon fiber tension barrel
polymer bolt buffer (a must)

http://i46.tinypic.com/s309xe.jpg

coolluke01
February 20, 2013, 10:11 PM
I just took these pics today.

Volquartsen Lightweight with carbon fiber barrel.

http://www.thehighroad.org/attachment.php?attachmentid=180109&stc=1&d=1361412569


http://www.thehighroad.org/attachment.php?attachmentid=180111&stc=1&d=1361412826

40 yards with cheap federal ammo.

http://www.thehighroad.org/attachment.php?attachmentid=178897&stc=1&d=1359781648

TIMC
February 20, 2013, 10:26 PM
Lots of really sweet 1022' here. This is mine but it won't be complete untill the Sparrow II suppressor arrives for it.
http://img.photobucket.com/albums/v369/timc/Ruger1022targetrifle.jpg

highpower
February 20, 2013, 10:51 PM
I decided to go tacticool on this one. Butler Creek stock on my 1988 vintage 10-22 with a Mitchell 50 round magazine I have had since the mid '80's.

http://highpower.smugmug.com/Firearms/10-22/i-pGtSHjM/0/XL/IMG_1888-XL.jpg

coolluke01
February 20, 2013, 10:59 PM
Savanahsdad: how did you finish the receiver? Did you put a clear coat on it? or does the aluminum not need anything? Do you have better close of pics?

captmoto
February 21, 2013, 01:29 AM
New to me, actually to my wife. This was her pick from a collector that passed away. His wife is slowly selling out his collection.

http://i245.photobucket.com/albums/gg50/captmoto/Ruger1_zpscb1577a6.jpg
http://i245.photobucket.com/albums/gg50/captmoto/Ruger2_zpsc68eca24.jpg
http://i245.photobucket.com/albums/gg50/captmoto/Ruger4_zps2ff22dcf.jpg

Detritus
February 21, 2013, 07:18 AM
Mine,

GM heavy Sporter barrel, Richard's Microfit stock, Volquartsen sear and hammer.

http://farm7.staticflickr.com/6038/6346717362_7f17026851_s.jpg (http://www.flickr.com/photos/31838309@N03/6346717362/) http://farm7.staticflickr.com/6043/6346718098_7cc3000750_s.jpg (http://www.flickr.com/photos/31838309@N03/6346718098/)

savanahsdad
February 21, 2013, 05:43 PM
Savanahsdad: how did you finish the receiver? Did you put a clear coat on it? or does the aluminum not need anything? Do you have better close of pics?
no clear coat needed , I wet sanded every thing I could get at by hand, then with a Dremel tool I use lapping compound, to remove the rest of the black finish, then ground the trigger gaurd down, , upgraded springs, and buffer, reworked factory hammer and trigger , trigger pull is at 3.5lbs, with almost no creap, then many hours of buffing with high speed buffing wheel and dremel tool,

180146

180147

180148

180149


NOTE: The untouched 10/22 is alsol from 1972 ser#111-608xxx it's just a bit older , not bad for a 41 year old Ruger , and still shoots like new !

jmorris
February 21, 2013, 05:55 PM
Out of all the ones I have I shoot this one the most.

http://i121.photobucket.com/albums/o213/jmorrismetal/can/1022.jpg

Water-Man
February 21, 2013, 06:27 PM
.............

kimberkid
February 21, 2013, 07:15 PM
Fagen Stock, Midway/Clark barrel, polished factory trigger

http://img.photobucket.com/albums/v40/kimberkid/My_22z/Ruger_1022_Custom.jpg

SaxonPig
February 21, 2013, 09:57 PM
Had this one for about 30 years and except for the scope it remains as issued. Never felt the need for doodads and such.


http://www.fototime.com/E8F5499015E4A03/standard.jpg


Besides, it seems to shoot OK as is... Two 5 round groups at 50 yards rapid fire.


http://www.fototime.com/8590A58CF811990/standard.jpg

whitefeather
February 21, 2013, 11:09 PM
Ruger USA Shooting Team Stock

CraigC
February 22, 2013, 11:24 AM
Never felt the need for doodads and such.
If I had a stock carbine that shot like that, I wouldn't change anything either. Most folks have to install a new barrel to get accuracy like that. Most of these guns don't shoot that well.

savanahsdad
February 22, 2013, 11:08 PM
I'm workin on it! :)
still working on it ???

roklok
February 23, 2013, 12:18 AM
A couple working 10-22s in the Alaskan bush, a long long way from civilization.

josiewales
February 23, 2013, 08:38 AM
still working on it ???

Well, it's like this: I am going to an auctioneering course at Harrisburg Area Community College, and that cost money and lots of it. Soooo, yea I guess I am.

A couple working 10-22s in the Alaskan bush, a long long way from civilization. That poor '94! :*(

goldie
February 23, 2013, 02:38 PM
http://img834.imageshack.us/img834/8778/ruger001.jpg (http://imageshack.us/photo/my-images/834/ruger001.jpg/)

josiewales
February 24, 2013, 04:06 PM
goldie, that is a GORGEOUS rifle!!

earlthegoat2
February 24, 2013, 04:18 PM
It would be a crime to customize this any more than it already is. Williams sights is all.

http://i285.photobucket.com/albums/ll66/earlthegoat2/SDC11413.jpg

Mr.510
February 24, 2013, 06:05 PM
http://i284.photobucket.com/albums/ll35/Mister510/Guns/Ruger%2010%2022/2013-02-24_13-13-31_866_zps5fe05a9c.jpg

This is my beloved 1984 Ruger 10/22. It was my first firearm, purchased from a pawn shop in Seattle the day after my 18th birthday for $60, in 1987. All the 10/22s I'd seen to that point had either dark stained stocks or had been tacticooled out with a bunch of plastic crap and I wanted something different. I went looking specifically for a rifle whose barrel and receiver were in good shape with a beat up stock I could refinish - to save money. You can't really tell in the pic but I re-shaped the stock a bit while sanding the dents out and rounded off all the edges. Then I bedded the barrel into the stock using a kit from Gander Mountain followed by about ten coats of Tru-Oil. I re-shaped and polished the trigger, de-burred and smoothed every moving part, and mounted a Bushnell 2.5-10x scope. I installed a Ram-Line extended mag release and a stainless butt plate, it's otherwise 100% original parts. I did this in the weeks following it's purchase and have never had reason to modify it further. I don't know how many tens of thousands of rounds have been through it but it still shoots groups the size of a dime at 50 yards with decent ammo. :)

nipprdog
February 24, 2013, 09:01 PM
goldie, that is a GORGEOUS rifle!!

Agreed. It just needs lower scope rings. :D

Reloadron
February 24, 2013, 09:32 PM
I am another one of those people who leaves off the tacticool stuff. The background pictured rifle is the 10/22. Not sure why the scope was off when I took the picture. :) Just a plain Jane rifle that shoots just fine.

http://www.bearblain.com/images/22%20and%2044.png

Ron

CH47gunner
February 24, 2013, 11:04 PM
This is from too much hanging out at rimfirecentral.
What started out as a stock 10/22, purchased around 1975, that I had intended to only accurize a bit. When finished there were no Ruger parts left. I had even replaced the receiver with a VQ SuperLite as after buying all the internal VQ parts I decided they deserved a tighter home than the original Ruger receiver.

Bruce

Parts:
Volquartsen SuperLite receiver
Green Mtn. 20" Match barrel
Fajen stock w/ VQ bedding kit
Volquartsen TG2000 trigger group
Volquartsen Machined bolt
Volquartsen Buffer
Volquartsen Compensator
Mueller 8.5-25x44 scope
Warne Maxima QT rings

Here you go - Custom 10/22
http://i48.photobucket.com/albums/f232/ch47gunner/P9010001.jpg
http://i48.photobucket.com/albums/f232/ch47gunner/P9010006.jpg
http://i48.photobucket.com/albums/f232/ch47gunner/P9010002.jpg
http://i48.photobucket.com/albums/f232/ch47gunner/P9010008.jpg

josiewales
February 25, 2013, 06:25 PM
Gunner, what size groups do you get at 100 yards? Very nice rifle.

4sixteen
February 25, 2013, 09:18 PM
My 10/22 with a Ram-Line stock and Nikon Monarch 1.5x4.5 scope -

http://i145.photobucket.com/albums/r236/storm_rider02/1022RL.jpg

josiewales
February 27, 2013, 08:53 AM
......

josiewales
February 28, 2013, 02:34 PM
......

saenzrich
February 28, 2013, 03:19 PM
10/22 Target with Hogue stock and Vortex Crossfire II 4-12x42http://i1067.photobucket.com/albums/u431/saenzrich/1022004_zps210bae40.jpg

towerdog
March 1, 2013, 02:13 PM
Here is a quick picture of mine and the kids.

http://i619.photobucket.com/albums/tt277/flstfifatboy/photobucket-19911-1362161425892_zps6f92d025.jpg

If you enjoyed reading about "Pics of your..." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!