The "Walker Stick"


November 26, 2012, 07:51 PM
One of my hobbies is making walking sticks. I got a little bored over Thanksgiving. Between watching a little TV - well a lot of TV, I ventured into the man cave to work on a walking stick project. Recently, we have gotten into watching AMC(s) "The Walking Dead." Never thought I would get into a Zombie series, but the story line is great.

A few weeks ago, I purchased an ice axe walking stick handle from Treeline Woodcraft for $15.95. The shaft is a piece of oak that I cut about 35 years ago and had been sitting in the back of a closet. Guess you say its cured. The stain is Minwax Dark Walnut and the rubber tips I got off of ebay.

I spent a couple of hours rasping and sanding until everything fit. Then came the stain, followed by 5 coats of polyurethane. The axe head was a tight fit, but, I secured it with Gorilla Glue Epoxy.

A lot of folks have started carrying a cane for self defense as well as a medical device. My "Walker Stick" fits the bill for aggressive dogs, well as the occasional "Walker Zombie" LOL.

If you enjoyed reading about "The "Walker Stick"" here in archive, you'll LOVE our community. Come join today for the full version!
November 26, 2012, 07:59 PM
Nifty website and nice work.

Owen Sparks
November 26, 2012, 09:41 PM
Nice work.

Any idea what it weighs?

November 26, 2012, 09:50 PM
That is nice!

Is the ice ax head actual polished brass, or is it plated something else??

Did you use the 3/8" all-thread, as well as the Gorilla Glue to attach it??


November 26, 2012, 09:53 PM
Very nice.

November 26, 2012, 09:53 PM
Well done.

November 26, 2012, 10:03 PM
Not sure on weight - its solid brass. Not too heavy for a walking stick handle, but has some heft.

rcmodel - It has good depth in the collar portion. About an 1.5 inches. I sanded the shaft down to where it was a tight fit. The Gorilla Glue Epoxy is some of the best, liberally applied to the inside, I really doubt it would ever come loose. I didn't see the need of using the threaded rod.

November 26, 2012, 10:08 PM
It sure would have added a lot of strength if you ever needed to whack a zombie though!!


November 26, 2012, 10:10 PM
What a novel idea for the head. I've always appreciated the functionality of the classic ice axe and in miniature on a walking stick would be a great nod to a mountaineering past for someone.

November 26, 2012, 10:35 PM
Very nice walking stick.

November 27, 2012, 06:44 AM
Really nice idea. I might make one myself, either to keep or send to my relative in Italy who was climber. Hmm, maybe I'll make two.

November 27, 2012, 07:36 AM
I like the way you worked it into a work of eye candy as well as being functional.

November 28, 2012, 04:37 AM
It's a variation on the Shepherd's Axe, ( which used to be a common tool in eastern Europe. Called variously fokos, ciupaga, or valaska, the Shepherd's axe was carried by - - you guessed it - - shepherds and others who traveled outdoors often.

Bram Stoker mentioned the Shepherd's Axe in Dracula:

Now and again we passed a leiter-wagon--the ordinary peasants's cart--with its long, snakelike vertebra, calculated to suit the inequalities of the road. On this were sure to be seated quite a group of homecoming peasants, the Cszeks with their white, and the Slovaks with their coloured sheepskins, the latter carrying lance-fashion their long staves, with axe at end.

United Cutlery has a "Kommando Survival Axe" ( that is obviously a Shepherd's Axe. I've been hoping that Cold Steel would make one, but so far no such luck. A good woodworker could probably make you one by using one of Cold Steel's tomahawk heads.

Among custom makers, Joseph Szilaski will make a Shepherd's Axe (and charge ABS Master Smith prices), as will Walk By Faith 777. (

You can also find them on eBay, both antique Shepherd's Axes and modern, hand-forged axe heads. (

They're a great tool.

Owen Sparks
November 28, 2012, 11:27 AM
A similar weapon on a long shaft was used to pull mounted knights off their horses in battle.

November 30, 2012, 10:53 PM
Double posted

November 30, 2012, 10:58 PM
Looks great! I'm with RC though, the all thread would make it stronger...

November 30, 2012, 10:58 PM
How does it feel in the hand after using it for a day? Is it comfortable? Does the angle of the handle feel correct when walking? Some of the hames I have tried don't fit my hand or the angle isn't comfortable to use all day. I ask cause I assume you attatched it square on the shaft, it is possible to make an angle when putting it on but if it would be more comfortable if it was a couple degrees off straight it might work better. Just asking in a round about way if straight works well or if it would be better angled a few degrees?

December 1, 2012, 07:00 AM
grumps - It really doesn't feel that bad. I've had a few friends look at it and like it also. I think Treeline is going to get some business from this one.

Just personal - but, I like the flat side to the rear better when carrying it. I wanted something unique, functional, different, and a nice conversation piece. It definitely fits the bill in all areas. Does it have the feel of some of the modern ergo style cane handles - NO. But, its in a class all of its own.

December 1, 2012, 07:40 PM
I just got one of these tops. Wondering what type of wood it should go, cocobolo, purpleheart, jatoba, or hickory.

December 1, 2012, 07:49 PM
I'd say you need 3 more handles :-)

December 11, 2012, 03:46 PM
Ultimately I went with the Jatoba. They make martial arts sticks out of it so it's plenty strong. Like the color with the brass too.

Mounting, I opted for a 3/8" bolt that I sunk into the wood (pilot hole then turned with a pipe wrench), then hack-sawed off the head and screwed on the handle. Will have picks once the finish is done.

December 12, 2012, 04:45 PM
PRM, you did a hell of a job on that walking stick, you should be very proud of the outcome of you labor:).

December 12, 2012, 05:11 PM
looks nice

If you enjoyed reading about "The "Walker Stick"" here in archive, you'll LOVE our community. Come join today for the full version!