Brass Catcher


PDA






2bfree
November 28, 2012, 04:57 PM
Can anyone recommend a brass catcher that is not a ton of money, not to bulky, for use from a bench on a pistol range ? I am getting really tired of picking up my brass, especially when someone else is shooting the same caliber as I am. Thanks

If you enjoyed reading about "Brass Catcher" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
November 28, 2012, 05:00 PM
I got a free beer commercial beach umbrella from a local watering hole when they replaced them with new ones.

I just open it and lay it upside down where the brass is landing.

rc

Ehtereon11B
November 28, 2012, 05:09 PM
Go out and buy a poncho in a mesh bag or any other mesh bag. Loop a second drawstring through (since most mesh bags have only 1) and you are all set.

2bfree
November 30, 2012, 06:45 PM
Thanks, not many used beach umbrellas here in Washington, lot of rain umbrellas though, might be a bit small though. Not sure how wearing a poncho would work but maybe I will give it a try :) I think I will keep on looking but thanks for the help.

Ehtereon11B
December 1, 2012, 07:31 AM
Not the poncho. Some ponchos are sold in a mesh bag. The mesh bag can be used as a brass catcher, more effective on rifles. Haven't found a really good brass catcher for semi-auto pistols other than putting a tarp or something about where brass lands.

Captaingyro
December 10, 2012, 07:49 PM
Pretty much any big ground cover or paint drop cloth works. Tarps are good, but a little heavy. For low weight and low cost, the best option is an old worn out bed sheet that you're going to toss out anyway.

For the "money is no object" option, Google "brass magnet". There's a guy at my range who has one, and it's truly the deluxe solution, but he almost can't shoot for fear someone will walk on it when he's not looking.

Captaingyro
December 10, 2012, 07:53 PM
I just re-read your original post and realized you're shooting from a bench. I use this one with semi-auto rifles from the bench, and it works great. Wait for it to go on sale:

http://www.midwayusa.com/product/942827/ctk-precision-universal-brass-catcher

2bfree
December 16, 2012, 07:46 PM
Captaingyro, I saw one of those at the range last week, seemed to work pretty good. Would still need to buy a short telescoping tripod for it. I will keep my eye out for a sale. Thanks

aka108
December 17, 2012, 10:10 AM
Just bend over and pick the stuff up. Good exercise.

Captaingyro
December 17, 2012, 03:07 PM
Just bend over and pick the stuff up. Good exercise.

Mmm...folksy, homespun wisdom.

Frequently, however, the guy sitting to your right at the bench would rather not have you bouncing it off the side of his face. Sometimes it's about manners.

If you need exercise, that's a different forum.

mike.h
December 17, 2012, 03:16 PM
I use one of these:http://www.uniquetek.com/site/696296/product/T1310

Captaingyro
December 17, 2012, 04:39 PM
The Brass Wizard is a great solution, but for many of us, the issue is trying not to let it hit the ground in the first place. Like the OP stated, one problem occurs when multiple shooters are all shooting the same caliber, and everybody wants to recover his brass. Having it all mixed up at your feet, or rolling out in front of the firing line, becomes pretty inconvenient. Also, if you're not on the extreme left, everybody else's brass is comin' your way.

I have a different issue: tall grass. Brass seems to just disappear in grass, except when the lawn mower comes by, when it magically jumps up into the blades.

When all is said and done, there's a lot to be said for just having a bag o' brass all ready to go home with you when you're done shooting...no muss, no fuss, no losses.

Nanook
December 18, 2012, 10:14 PM
A guy on another board built one of these, and I'm building one too. I figure I can install it on a tripod for handguns, and clamp it to the bench for rifles.

Looks like it will work pretty well. Cheap to make, too.

The PVC is 1/2" and a 10 foot length will do the trick. The mesh is aluminum window screen material from almost any hardware store. Attaching the screen to the PVC can be done with various types of wire; brass, galv, whatever you can work through it. Maybe even heavy thread.

Mine is almost done, just have to finish wiring it to the PVC. I made mine 2 feet square, and had some pipe left over.

It's not my design, I found it on another board.

mike.h
December 19, 2012, 12:44 PM
actually Caldwell makes an AR specific brass catcher: http://www.midwayusa.com/product/269873/caldwell-ar-15-brass-catcher-nylon-mesh-black

Works good, small footprint.

Peter M. Eick
December 19, 2012, 01:08 PM
http://www.cmmshootingsports.com/product_info.php?products_id=41


This is the one I use. Works well for most brass. It does not like light brass in high winds though.

springer99
December 19, 2012, 03:35 PM
Most bullseye pistol shooters tend to just make their own brass catcher from an old mesh laundry bag and some 3/8" or 1/2" ridged plastic tubing you can pick up at Lowe's, etc. If you dont' glue the whole thing together, it takes up very little room in your shooting bag and assembles in a minute or two at most at the range..

tuj
December 19, 2012, 05:24 PM
CMM Shooting Supplies offers a very nice catcher. It's not cheap, but it's legal for bullseye (correct size mesh) and well-made. I eventually broke down and got one.

http://www.cmmshootingsports.com/index.php?cPath=21_26

If you enjoyed reading about "Brass Catcher" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!