Berrys 124grain plated rn


PDA






lttuna
December 7, 2012, 12:03 PM
In lee's reloading manual 2nd edition pg 509 they show data for 124 grain copper plated. Is the the data I would use for Berrys 9mm 124gr round nose

If you enjoyed reading about "Berrys 124grain plated rn" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
armoredman
December 7, 2012, 12:21 PM
Yes. :) Berry's states their bullets can be used up to the mid range of jacketed data.

lttuna
December 8, 2012, 10:57 AM
Thanks , will try it out

the count
December 8, 2012, 09:23 PM
There is a ton of nit picking and hair splitting going on with reloading. Feel free to indulge into it but if you want to keep your life simple just use 4.2 grains of bullseye with any type of 9mm bullet from 115-124 grains. Thats a stout, but not hot, load that will cycle any semi auto.

rfwobbly
December 8, 2012, 09:29 PM
If you like those, then try the Berry 124gr Hollow Base RN next time for a little extra accuracy.

https://lh5.googleusercontent.com/-rGbGuDp4IFo/TX6ioh4MFUI/AAAAAAAACM4/16LU6BW5LFs/s800/IMG_4301.JPG

armoredman
December 9, 2012, 01:48 PM
I have the 115 grain Berry's HBRN-T, and they work wonders. :)

I also don't have any Bullseye - nobody within 70 miles of me carries powder or primers, so I use what I've used for years - Accurate Arms, ordered in. If there was somebody close who carried it, and I could pick up a pound on a whim, I'd give it a "shot.";)

If you enjoyed reading about "Berrys 124grain plated rn" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!