Turret Presses??


PDA






68lemans462
December 8, 2012, 12:28 PM
I have recently learned about turret presses. I'm specifically looking at the Lee to replace my single stage RCBS press. I load alot of handgun ammo and I would like to increase my efficiency.


What are some honest opinions about the turret presses? Limitations? RCBS/Lyman/Lee, which one is best?? ANY suggestions are welcomed. Thanks guys.

If you enjoyed reading about "Turret Presses??" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
RandyP
December 8, 2012, 12:36 PM
There are a ton of posts on this subject, and a LOT a fierce brand loyalties - lol

I own, use and very much like the Lee CLASSIC turret - I can at my highly relaxed pace make 150-175 rounds per hour with ease. The auto-advancing feature of the Lee makes the process quick and easy - four handle pulls turns empty brass into ammo.

Note that I have the CLASSIC, not the Deluxe, a lighter weight older model.

Progressives will churn out 300-400+ rounds per hour if that better matches your realistic ammo needs. I would have NO problem buying a Lee Loadmaster, MANY others would scoff at the notion and demand I buy Dillon, cuz it's the best. But them folks ain't sendng me any money, so I buy what I want - LOL

I don't know how to answer the question of 'Best'? My turret is a perfect match to MY needs and wallet so for ME it is "best".

68lemans462
December 8, 2012, 12:41 PM
What is the difference between the "classic" and the "deluxe" lee turrets??

NeuseRvrRat
December 8, 2012, 12:47 PM
the Lee turret is the only one that auto-indexes. if the idea is to increase productivity, then that pretty much settles it.

Old krow
December 8, 2012, 12:51 PM
What is the difference between the "classic" and the "deluxe" lee turrets??
There are several differences, one being that the base of the classic is cast and the deluxe is aluminum. I have had both and greatly prefer the classic over the deluxe. I believe (I only have the classic now) that the classic has a larger ram diameter as well.

Another thing to consider is that many turret presses are more along the lines of a "mulit-stage" press while the Lee Classic Turret is an auto-indexing turret press.

In my opinion (which is just that) the LCT is a great turret press and it's tough to go wrong with it. However, a turret press isn't a progressive which isn't a single stage.

I'm specifically looking at the Lee to replace my single stage RCBS press.
Why did you build your bench so small? :D I hadn't intended on buying a LCT, but I ended up with one in a trade a while and it sits beside my Redding SS.

mdi
December 8, 2012, 01:24 PM
Lee's Auto-indexing Turret press is a "semi-progressive"...

RandyP
December 8, 2012, 02:48 PM
The Classic also has the superb spent primer collection system - clear plastic tube under the ram, same as on their breech lock Anniv single stage press as opposed to the Deluxe's little cast in 'cup' that then needs to be cleaned out.

As has been said, NOT a progressive press, and slightly different than other makes of turret which need to be hand advanced thru each stage. IMHO the auto-advancing limits the likelyhood of a dropping a double powder charge, but that is a minor concern if one is careful.

My standard caveat is that all the name brands out there make GREAT machinery, one just trades $$$$$ for some features and speed. I defy ayone to tell the difference in finished rounds made by all the different makes and models if the same components were used.

45lcshooter
December 8, 2012, 03:56 PM
My dad has a Lee Classic progressive. He likes it but changing from pistol to rifle can be a pain, so he has that just set up for the semi auto pistols we have. I load all the revolver pistol and rifle on my Rockchucker, those are more for accuracy than quanity.

If you want quanity go progressive, accuracy go single stage. I can nock out 200 rds an hour on my Rocjchucker.

RustyFN
December 8, 2012, 04:05 PM
My dad has a Lee Classic progressive.

Lee doesn't make a classic progressive. They only make a classic single stage and classic turret.

RandyP
December 8, 2012, 04:35 PM
Lee has their Pro 1000 and Loadmaster model progressive presses.:

http://leeprecision.com/

Centurian22
December 8, 2012, 05:07 PM
I ordered the lee classic turret. As has been said cast iron in place of aluminum and I believe higher clearance for longer calibers.

rfwobbly
December 8, 2012, 10:06 PM
If you'll go to THIS LINK (http://ultimatereloader.com/2009/11/21/loadmaster-loading-45-acp-hd/) and look in the left hand side bar you'll see lots of great demo videos of the Lee turrets in action.

The advantage the Lee has over your current single-stage is that it reduces the case handling. You insert the case and pull the handle 3-4 times and out pops a finished round. It is definitely faster than a single stage, but not nearly as fast as a true progressive.

As an intermediate step, the Lee classic turret gets rave reviews from everyone.

Hondo 60
December 8, 2012, 10:44 PM
Be careful because Lee makes 2 different Turret presses.
One is good, the other is crap (atleast that was my experience).

The Lee Classic Turret Press is very good.
The old primers go down the center of the ram & deposited in a plastic tube.
That tube can hold hundreds of old primers & is emptied at your convenience.
The construction of the press is also significantly better than their other model.

The so-called "deluxe" model is quite a bit less in quality as well as primer disposal.
I think I had about 85% or so of the primers all over the floor rather than where they were supposed to go.

You can get a Classic model for about $100, the deluxe is closer to $85.
(just the press, not a kit)

The Lyman or RCBS presses are gonna be SIGNIFICANTLY more $$$
(closer to $200)

Flt Simulation
December 9, 2012, 08:15 AM
I was thinking very seriously of buying either a Dillon or a Hornady L-N-L progressive press, but since I only load about 300 cartridges per month max, I just couldn't justify the extra expense of a progressive press.

Bought a Lee 4-Hole Classic turret press (SKU: 90064) and have been very happy with it for loading .45 ACP (that's all I load).

I like that it has uses 4 dies and is auto-indexing which really speeds things up.

Make sure you also get the Lee Carbide 4 Die Set, the Pro Auto-Disc Powder Measure, the Safety-Prime Primer Feeder and the Auto-Disk Riser (needed when using the Pro Auto-Disc Powder Measure)

Total cost for all this will be approx $210 + shipping

http://i127.photobucket.com/albums/p158/Turbo6ta/Press.jpg

Lost Sheep
December 9, 2012, 05:15 PM
I wrote this summation a while ago, so I apologize for those facts that are repeated from earlier posts.

The Lee Classic Turret (not to be confused with the Lee Classic Cast, which is a single stage press) and the Lee Deluxe Turret operate in exactly the same manner. (Except for some older, now discontinued models of the Deluxe which have 3 die stations - and, no, the 4-hole turrets do not interchange with the 3-hole turrets.)

Same speed, many of the same parts and same operating mode and technique.

But there are differences.

Evolution: The Classic Turret is the newer design of the two.

Durability: The Classic Turret's base is cast iron, the Deluxe is cast aluminum. Iron wears better than the softer metal, aluminum.

Ease of use: The Deluxe has a 1" smaller vertical opening than the Classic Turret. Though either is capable of taking rifle cartridges, the Classic Turret will take longer ones and if you have big hands is the clear winner

Spent Primer Handling: The Deluxe drops primers out of a slot in the ram to fall into a cavity inside the press base. But only about 90% succeed in their intended journey. The Classic drops primers down the center of the hollow ram and into a clear plastic tube which can contain a few hundred primers or be directed into a receptacle of your choice. The difference in the behavior of the debris (products of combustion) from the spent primers is even more striking. With the Deluxe, you wind up with primer detritus all over and have to dismount the press and sweep up the pile of spent primers every several hundred rounds.

More on Durability: The Deluxe ram is smaller in diameter than the Classic's ram. This gives a much different bearing surface for the ram to be guided as it moves up and down. The Classic press will last much longer because of the increased surface area and because iron is tougher than aluminum.

Even more on Durability: The Deluxe's linkage is aluminun and stampings. The Classic's linkage is more robust. I believe the leverage on both is the same.

In summary:

The Deluxe is aluminum, spills spent primers and has a slightly smaller opening (which you may find important when loading long cartridges or long bullets. Kempf's gun shop (online) assembles a kit containing the Classic Turret and does not force someone who already reloads to take other stuff you already have (except a set of dies and some cartridge boxes).

I think that's about it.

Good luck.

Lost Sheep

P.S. The first time used my Classic Turret (after a practice run of a handful of rounds) I loaded 100 rounds of 45ACP in 47 minutes. That included filling the primer tray and powder hopper. And I am SLOW and careful. But thas was using the automatic indexing.

Lost Sheep
December 9, 2012, 05:35 PM
I have recently learned about turret presses. I'm specifically looking at the Lee to replace my single stage RCBS press. I load alot of handgun ammo and I would like to increase my efficiency.


What are some honest opinions about the turret presses? Limitations? RCBS/Lyman/Lee, which one is best?? ANY suggestions are welcomed. Thanks guys.Don't forget Redding.

The Lee turrets are the only turrets that offer auto-indexing. If you want to do continuous loading (as opposed to batch loading) this is a great time saver.

Lee's turrets mount inside a ring. Every other turret mounts on a center post. This means the Lee turrets don't tilt (they may appear to, until you note that the entire turret lifts, where other turrets lift in front and depress in back). For all but the most discerning loaders, this is a non-issue.

Lee Turrets mount inside a ring with lugs and take only a twist of the turret to remove or install. Most others, mounting on a center post, take a bit of unscrewing with a tool of some kind. Lee turrets only have 4 die stations. Most others have 6 or 7 (there may be a 5-station or two out there) Lee Turrets list for $13. Most others are 3 or 4 times that. But if you need (or want) more than 4 stations, the Lee is out.

Regards,

Lost Sheep

Lost Sheep
December 9, 2012, 05:39 PM
I have recently learned about turret presses. I'm specifically looking at the Lee to replace my single stage RCBS press. I load alot of handgun ammo and I would like to increase my efficiency.


What are some honest opinions about the turret presses? Limitations? RCBS/Lyman/Lee, which one is best?? ANY suggestions are welcomed. Thanks guys.
How much loading? How many calibers?

If the answer to the first question is more than a few hundred a week and the answer to the second is 1 or 2, you might want to consider a progressive.

I don't like to use a progressive myself (too many things going on simultaneously for my comfort), and I find loading to be relaxing (except when using a progressive, which is unnerving to me). A matter of taste, style and personality, I guess. But it is something to consider.

Lost Sheep

PO2Hammer
December 9, 2012, 05:55 PM
I like my Redding T-7 a lot. It's a really stiff, precise machine.
I like having 7 stations.
Because it's manually advanced it probably isn't as fast as a 4 station auto advance turret press.

codefour
December 9, 2012, 06:42 PM
MY vote goes for the Redding T-7 as well. It is built stronger than a Sherman tank! No, it does not auto index but I do not know how well the Lee turets will size large brass cases, especially over time. I know the T-7 will never ever wear out.

I gave up on Lee products a couple of years ago. Yes, I have some of their dies for odd calibers that I rarely load.

mike.h
December 9, 2012, 11:26 PM
Pretty happy with the LCT for .45 ACP and 9mm. Just purchased the stuff to start reloading 223.

mdi
December 10, 2012, 01:13 PM
Hmmm, my "crap" Lee turret has reloaded several thousand 38/.357s, .44 Specials/Magnums (at least 2K of this caliber alone), 9mm, 45 ACP, .223 Rem., 30-30, and a few 7.62x54R. Plus an uncountable number of sized lead bullets in .44, 38/357, and 9mm calibers. Mebbe it doesn't know it's "crap"?

"It's surprising what one can accomplish when one doesn't know what one cannot do" Garfield Cat...

If you treat a tool like crap, it soon will be crap.

Mac45
December 10, 2012, 03:48 PM
The Lee Classic Turret is a great press.
Highly recommended unless you're loading some of the bigger rifle rounds.

mcdonl
December 10, 2012, 04:10 PM
LOL - I have so long ago removed the indexing rod in my turret press I forgot what it did. I find that I still prefer "batch processing" of individual stages (Deprime/Size/Prime, Charge, Seat and Crimp) that I use it as a very easy to setup single stage.

I have the classic turret and it is pretty nice.

SlamFire1
December 10, 2012, 04:42 PM
For pistol shooting I use a Dillon 550B progressive. Progressive presses are the fastest way to load pistol ammunition.

A turret may be faster than a single stage for pistol rounds, but it still took to long.

For rifle, I still use my turret presses for priming and decapping. I used for years a Lyman T Mag. It is an excellent press but primers bounce out of the cup onto the floor. I am now using a Redding T-7. Its turret is populated with 223, 308, 30-06 sizing dies and decapping dies. I like being able to set up and leave these dies in the turret as 99% of my shooting is with one of these rounds.

I use my Dillion to dump rifle charges and seat the bullets. Faster than either a turret or a single stage.

TheCracker
December 10, 2012, 06:58 PM
Some will say lee is junk but I disagree. I have a single stage and the lee classic turret. The turret is WAY faster and what I use for all of my handgun and 223 loading. I only use the single stage for my precision rifle stuff now that I have the turret.

Kevin Rohrer
December 10, 2012, 07:15 PM
Besides the ones mentioned, you should take a look at Ponsness-Warren's two turrets, as well as CH/4D's 444, which I own.

Unusual is kewl. :D

kennedy
December 10, 2012, 09:16 PM
my brother gave me an old lee 3 turret deluxe after loading thousands of rounds years ago, I now have also loaded thousands of rounds with out any trouble. I load .38, .40, .45lc, .223, 7.62x54, 6.5x55, and .308. with the .308 I use it as a single stage press for precision.

TrueTexan
December 10, 2012, 09:22 PM
I have the Lee classic turret and its all been said In earlier posts. I think it is great with great features and if you shop around a great price this time of year.

dragon813gt
December 10, 2012, 09:41 PM
The LCT is worth every penny and then some. It's the press I use the most at this point. Caliber changes are quick and easy w/ extra turrets. Set up your dies and you're good to go until you switch bullet profiles. Being able to take out the auto indexing rod and use it as a single stage is a nice feature. I'd buy one and not look back.


Brought to you by TapaTalk.

If you enjoyed reading about "Turret Presses??" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!