Reloaders, what caliber(s) have you never bought factory loaded ammunition


PDA






3006mv
December 11, 2012, 11:50 AM
What calibers have you reloaded but never had to buy factory loaded ammo for your arsenal?

My list is: .22 Hornet (the reason I got into reloading in the first place) bolt action
.300 Whisper/300-221 Fireball (AR upper) and hever had to buy brass for it either
.44 S&W Special (revolver)
.308 Win (bolt action)

I wish I could say I didn't have to buy brass for the others, sometimes you can't just find .44 Special lying around the range.

If you enjoyed reading about "Reloaders, what caliber(s) have you never bought factory loaded ammunition" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
john wall
December 11, 2012, 12:00 PM
I don't buy factory ammo. If I were to get a new caliber, (I have the calibers I want), I buy 1000 rds new brass (handgun) or 200 rds for rifle.

OF is okay if it is available at the right price (1/2 price of new brass), but often new brass is close in price to what folks think fired brass is worth.

W.E.G.
December 11, 2012, 12:03 PM
.32 H&R mag

AABEN
December 11, 2012, 12:10 PM
40 the police did give me around 500 once fired brass.

mavracer
December 11, 2012, 12:15 PM
480 Ruger

Kyle M.
December 11, 2012, 12:16 PM
.45-70 Gov't., .357 Mag I think thats it.

cfullgraf
December 11, 2012, 12:36 PM
38-45 Clerke, 7mm International Rimmed, and 6.5 x 54 Mauser. The first two are wildcats and the last one is obsolete and not currently in production.

I like to buy a little factory ammunition for my firearms and shoot them over a chronograph for comparison with my reloads.

JohnM
December 11, 2012, 12:42 PM
That 7mm International Rimmed sounds like an interesting one.
I've never bought any ammo for my 30 Herrett either, or any brass for that matter, made every piece myself. :evil:

mtrmn
December 11, 2012, 12:59 PM
300 winmag, 38 S&W, 40 S&W, 357 mag, 38 spec, 30-06

NeuseRvrRat
December 11, 2012, 01:07 PM
.22-250
30-30

redclay
December 11, 2012, 01:16 PM
38 spl. First lot I bought was 1000 SWC reloaded in Atlanta, still using that brass.

Arkansas Paul
December 11, 2012, 01:18 PM
.45 Colt
My Blackhawk has never fired a factory round.

beatledog7
December 11, 2012, 01:20 PM
None. I always shoot factory ammo first in any new gun I acquire.

GLOOB
December 11, 2012, 01:57 PM
W/e calibers I acquired after I started reloading.

JoeDaddy
December 11, 2012, 02:06 PM
My 44 mag has never tasted a factory round.

Not one.

56hawk
December 11, 2012, 02:34 PM
Quite a few now that I think about it. The most interesting one for me is the 44 Magnum since it was the first handgun I ever got. I've never bought or shot any factory ammo out of it. And actually my list would be a lot longer, but I always buy factory ammo for any gun I keep for self defense.

7.6520mm Longue
38 Super
10mm
10.55mm
44 Magnum
45 Colt
454 Casull
455 Webley
475 Wildey Magnum

338 Winchester Magnum
458 Lott
460 Weatherby

thump_rrr
December 11, 2012, 05:09 PM
9mm
.45ACP
7.62x39

I bought exactly 20 rounds each of .308 and .223 just so I could chronograph them and compare them to my handloads.

cfullgraf
December 11, 2012, 06:11 PM
That 7mm International Rimmed sounds like an interesting one.


Similar to, but predates the 7-30 Waters. basically a necked down and fire formed 30-30 case.

I probably have a couple handguns besides those cartridges listed in my first post that have not ever shot a factory round. i shoot several cartridges that I have multiple handguns, after the first one, I may not shoot factory ammunition is the subsequent purchases.

Rifles are a different story.

JohnM
December 11, 2012, 06:50 PM
I know the 7-30 Waters, hadn't heard of that International Rimmed before though. I like my 30 Herrett, but a little work forming cases.

Bull Nutria
December 11, 2012, 07:32 PM
I haven't bought factory 30-06 since 1976 when I started reloading, I bought a 7mm08 a few years ago and have never bought factory for it, I don't buy 44mag or 38 special either, I did buy a couple of boxes of 44mag to test a handi rifle, but don't buy any metallic ammo except for my 22 and 22mag!!

Bull

627PCFan
December 11, 2012, 07:41 PM
I have never bought any centerfire rounds for any of my guns except my shotguns. One of my Buddies got me into reloading from the get go.

What I reload.
7mm rem
6.5x55
357
38spec
45acp
35rem
223

helotaxi
December 11, 2012, 08:33 PM
.45 Colt and .270WSM at this point.

I've bought .357 but not .38spl though I've loaded and shot a great deal of it.

Cleftwynd
December 11, 2012, 08:43 PM
7mm STW
308 Win
270 Win, except for 2 boxes of Hornady Custom that was given to me
7x57
7mm08, I have bought for this one, but not in a long time
30-06
300 WSM
325 WSM
25-35
30-30, it is a bolt action and the first metallic cartridge I loaded for as I wanted spitzer bullets and not flat nose, have never ever used factory ammo in any 30-30 since


And hopefully soon a 22 K Hornet and a 220 Swift AI

FROGO207
December 11, 2012, 08:45 PM
The only ones that I HAVE fired factory ammo in are rimfire, 7.62X39, and 7.62X54. But I have a few ammo boxes of assorted factory ammo in some of the calibers I do reload (37 different ones presently) that friends/family have given me or I acquired in trades over the years that I never bothered to shoot up yet as I know my hand loads are much more accurate.:D Just sayin.:cool:

420Stainless
December 11, 2012, 08:48 PM
The only one I can think of that I've never bought factory ammo for is the .41 Magnum. Everything else I've bought some factory ammo somewhere down the line. I like reloading, but if I find a good deal on factory ammo I'm not against using it.

GLOOB
December 11, 2012, 10:48 PM
22-250, 223, 7mm-08. I've never purchased a centerfire rifle cartridge, come to think of it.

bfoosh006
December 11, 2012, 11:26 PM
.458 Lott.... I had a rifle rechambered to it before it was cool. As such, there was no factory ammo, let alone factory brass.

ATCDoktor
December 11, 2012, 11:37 PM
22 Hornet, 220 Swift, 45 Colt.

ljnowell
December 11, 2012, 11:40 PM
I have never bought 357 mag, 44 mag, 45 colt, or 40S&W. Reloaded from round 1.

hershmeister
December 11, 2012, 11:45 PM
7.7 Japanese
.380 acp

Hondo 60
December 12, 2012, 02:26 PM
44 Spl & 44 Mag.
I looked at the prices & thought "fergetabodit"! :eek:

When I bought my 44, the seller threw in a set of Redding dies & 150 pcs of 44mag brass.
Then I bought another 100 pcs of mag & 100 pcs of 44 Spl

BigJimP
December 12, 2012, 02:34 PM
The only ammo I buy ...is .22 rimfire.....

I reload ....9mm, .40S&W, .45 acp, .38 spl, .357 mag and .44 mag...
and I reload 12ga, 20ga, 28ga and .410 shotshells...

codefour
December 12, 2012, 02:45 PM
I have only been reloading for three years now. So I did buy factory ammo for all my weapons.

Since I started reloading, I have not bought a factory round except .22 LR n mag. I load 9mm, 40 S&W, 45 ACP, 38/357, 44 mag & special, 30 carbine, 30-30, 30-06, .308, 7mm-08, .223, and .270 win.

I have never fired a factory round out of my .460 S&W mag though. Only hand loads for that cannon. Factory 460 rounds were $2-3 a piece...!

I was never much of a shotgun shooter so I never thought of shotshell reloading.

I did NOT save any money reloading when I added it all up. I do shoot ten to twenty times as much.

I also really enjoy making my own custom ammunition.

brickeyee
December 12, 2012, 02:50 PM
The only ammunition I have ever purchased is .22 RF

I usually have dies, brass, and bullets beofre I have a new caliber that uses them.

Craigman
December 12, 2012, 06:40 PM
35 Whelan.
300wsm
25-06
500S&W
338-378WBY. this one really save me alot of $$$$
.308win. dont know how i managed this one, probably cause of all the brass I find.
44mag

Jaxondog
December 13, 2012, 07:24 AM
458 win mag, 458 Lott & 450 Watt's. Now I'm swamped with them.

FrankB1948
December 13, 2012, 09:48 AM
Hi I'm new to the forum but I've been reloading for 30 years. I have a 45 Long Colt, 7MM TCU and a 22-250 which have never fired a factory round. The rest of my guns have fired factory ammo at some point, but I prefer to reload for all of them.
My favorite gun to shoot is a 270 winchester with 57.9 grains of H4831SC behind a Hornady 140 grain bullet. This is not a max load per the Hodgdons Data manual, and is very accurate in my Remington Model 700.

James2
December 13, 2012, 11:01 AM
44 Magnum.

I have been loading and casting for 44 Spl for years, so when I got the Mag, I just bought brass. Didn't even need to buy dies.

mdi
December 13, 2012, 12:04 PM
Never is a long time. Occationally I would buy factory stuff for my handguns, but very rarely (I bought a box of Blazer Brass in 45 ACP about 6 years ago when I got a new 1911). I bought a box of 38 Specials when I got my wife a new 2" .38 mebbe 5 years ago, but other than that, nuttin except 7.62x39 stuff for my SKS.

FWIW, I reload for my 5, .44 Magnums, 3, .38 Specials, 1, .357 Mag., ,2 9mm, 2, 45 ACP, 2, .223, and one 30-30. Been a few years since I reloaded anything else, I just settled on these.

jwrowland77
December 13, 2012, 02:16 PM
My daughters Rossi single shot .223 has never seen a factory round. I'm sure any new guns that I will be getting wont ever see a factory round either.

Dthunter
December 13, 2012, 02:16 PM
That would be

.222 Rem
.223 Rem
22 Hornet
22 Pipsqueak
243 Win
6mm TCU
6mm Rem
270 Win
7-30 Waters
7-08 Rem
.280 Remington
7mm Mag
7mm STW
7mm Ultra
.308Winchester
300 WinMag
.338 WinMag
.38 Special
.357Mag
.35 Whelan
.416 Taylor
45-70 Government

And hopefully more to come!

Dthunter
December 13, 2012, 02:20 PM
O, yes, and 25-06 Rem as well.

I buy/collect brass for each rifle I buy and reload it accordingly. I never buy factory stuff any more. Not since the late 1980's.

jolly roger
December 13, 2012, 02:25 PM
22-250
257 Roberts
264 Win Mag
303 British
7.5 Swiss
41 Magnum
44 Special
44 Magnum
45 Colt
45-70

Charlie1022
December 13, 2012, 06:51 PM
45/120 Sharps

dap22
December 13, 2012, 06:59 PM
41 Mag
7.62 x 39
30-30
.357 Sig

frankmako
December 13, 2012, 07:57 PM
7mm-308, 7mmTCU, and 30-223 for me.

4895
December 13, 2012, 08:03 PM
.223

.22-250

.44 special

Steve2md
December 13, 2012, 08:07 PM
.45 acp, .300 win mag, 7.62x54r

david bachelder
December 13, 2012, 10:41 PM
I have never bought any .38 Special.

I haven't bought many .40's or .45 Colt.

Fanky
December 14, 2012, 03:24 AM
All of my firearms have had at least a box of factory ammo ran through them before reloading just to test them out and avoid buying components and dies for a potential lemon in a caliber I might not own again. That's usually the only box I buy, though.

dickttx
December 14, 2012, 09:39 AM
.45 Colt
.41 Magnum
38 Super

osprey176
December 14, 2012, 12:44 PM
218 Bee,30 Herrett,357 Herrett,375 Win,7.7 Jap.I usually buy a couple boxes of factory ammo with a new rifle,then reload everything after.

mdi
December 16, 2012, 11:43 AM
That would be

.222 Rem
.223 Rem
22 Hornet
22 Pipsqueak
243 Win
6mm TCU
6mm Rem
270 Win
7-30 Waters
7-08 Rem
.280 Remington
7mm Mag
7mm STW
7mm Ultra
.308Winchester
300 WinMag
.338 WinMag
.38 Special
.357Mag
.35 Whelan
.416 Taylor
45-70 Government

And hopefully more to come!
Do you reload or buy for those?

Nanook
December 16, 2012, 05:43 PM
.40 S&W

6mmBR

Neither gun has ever seen a factory round. Of course, only two companies make factory rounds for 6mm, Lapua and Norma. I've never seen it in person, only online.

So I had dies in hand not long after buying the rifle. Bought Lapua brass, and some Berger bullets, and away I went.

The .40 happened by accident. I had the pistol, and a friend gave me some brass he had, so I bought some bullets. As it turns out I never did buy any factory brass for that gun.

levsmith
December 16, 2012, 11:30 PM
None technically. I've only bought 1 box of 380 just to use as a comparison on the chronograph. everything else that I currently reload for I had before I was reloading so I had purchased quite a few factory loaded rounds. None lately though!

10 Spot Terminator
December 16, 2012, 11:40 PM
6.5x55 Swede
.264 Win Mag
.300 Win Mag
.25-284
.41 Mag

tlmkr38
December 17, 2012, 12:00 AM
357 Herret... They don't make factory ammo. Thinking about buying a mouser in 8mm-06, another one you have to load for. I like making odd stuff like that

zxcvbob
December 17, 2012, 12:12 AM
.41 Magnum.

I bought one box of .45 Colts when I first got the gun (intending to keep the brass), and quickly realized the commercial ammo was loaded down so far it's embarrassing. I haven't bought another box.

I haven't bought any .38 S&W, but I've reloaded so little of that one it doesn't count yet. :)

Hamish
December 17, 2012, 01:29 AM
I always break in a new gun with factory ammo. I'd like to be sure the gun functions like it is supposed to without worrying about voiding the warranty by using reloads. I'll also run a variety of brands and bullet types through it while breaking it in. Long guns I'll sight in with factory loads, then adjust when I switch to reloads.

Pistols - the first 300+ rounds will be factory.

Rifles - the first 100+ rounds will be factory.

After that, I usually only shoot reloads. I don't reload shotgun shells (I really don't shoot that much of it to make it worthwhile), so those are all factory.

I just picked up a new .308. I have 100 rounds of different factory ammo to run through it, and 1000 pieces of brass waiting to be reloaded. Now I just need a nice day to go to the range.

jim243
December 17, 2012, 01:40 AM
What calibers have you reloaded but never had to buy factory loaded ammo for your arsenal?

223 Remington
243 Winchester
35 Remington
9 MM Luger
45 ACP
40 S&W
357 Mag
357 Sig
38 Spl


Jim

Reefinmike
December 17, 2012, 02:36 AM
I only have one handgun that hasn't seen the horrors of factory ammo- 357/38spl. I bought an AR two months ago before prices went through the roof and availability to the gutter. I thought I was going to get my dies, bullets powder and primers in before i got that itchy trigger finger but I broke down a couple days after buying it and ran some dirty tulammo through it :(

Dthunter
December 19, 2012, 03:36 PM
Mdi:

I either currently reload those calibers , or have reloaded for them in the past.

All the calibers I listed were the ones I never bought factory ammo for.

I simply collected/purchased brass or formed the cases to reload for them.

I also forgot to add 6mm Ackley Improved to my list.

Chuck R.
December 19, 2012, 05:27 PM
These are the calibers I reload for, that Ive never bought factory ammo for:

7.65 Luger
.38SPC
.357 Magnum
.45 Colt (3)
.41Mag
.44 SPC
.44MAG

.223 Rem / 5.56x45mm (2)
6.5 X 57mm
.270 Winchester
.308, 7.62x51mm
.30-06
.300 Win Mag
8.15 x 46R
8x68S Magnum
.350 Rem Magnum
.40-70 Winchester (2.4")
.45-90 (2.4)
.45-100 (2.6)

The majority of my firearms other than rimfires have never seen a factory round except for HD/SD ammo, or some reliability testing.

Chuck

VINTAGE-SLOTCARS
December 19, 2012, 06:07 PM
I bought a Ruger in 45 colt and a RCBS reloading kit in 1973. I have never bought 45 colt factory loads for it. I now reload for over 10 differant rounds. The only 44 mag rounds I ever bought were a couple of 20 round box's of "Super Vel".

If you enjoyed reading about "Reloaders, what caliber(s) have you never bought factory loaded ammunition" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!