Ruger 10/45 problem


PDA






dk6
January 6, 2013, 01:11 PM
After shooting a 10/45 I disassembled it for cleaning. When the pistol was reassembled the trigger would not set. I am now trying to disassemble the pistol again but the assembly on the back of the frame will not release where it can be removed. All I can do is move it about 1/4". It seams to be hung up on something inside the frame. I do not want to force it too much for fear of breaking something.

Any ideas.

If you enjoyed reading about "Ruger 10/45 problem" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Fred_G
January 6, 2013, 01:41 PM
I think you put it together with the hammer in the wrong place. Try tapping the barrel on the ground to the hammer goes forward.

Good video on the gun. http://www.youtube.com/watch?v=vh5eylgiNcI

bigfatdave
January 7, 2013, 12:14 AM
assuming you're talking about a 22/45:
http://guntalk-online.com/TroubleshootingPage.htm
http://guntalk-online.com/2245detailstripping.htm

dk6
January 8, 2013, 06:51 PM
OUTSTANDING, it worked,
THANKS!!!!!
Don

Fred_G
January 8, 2013, 07:38 PM
Some good links there Dave, bookmarked.

If you enjoyed reading about "Ruger 10/45 problem" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!