Please help a dummy with a Lee Auto Prime Hand Priming Tool


PDA






sammy
January 21, 2013, 08:58 PM
Hello All,

I am currently (until about an hour ago) using a Lee Auto Prime Hand Priming Tool. It has primed thousands of cases and worked great. I had it upside down with a fresh tray of primers when the elevator pin dropped out. I am not talking about the seating pin but the first one that brings a primer up to the slot that takes it into the shell holder.

Trying to figure out what is going on I removed the shell holder and the small parts in the unit fell out. When I have taken this out in the past it normaly comes out as one unit.
http://i184.photobucket.com/albums/x183/carcrazysammy/lee3_zps3230b971.jpg

The instructions don't come with anything useful. Thanks for the help!
Sammy

If you enjoyed reading about "Please help a dummy with a Lee Auto Prime Hand Priming Tool" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
FROGO207
January 22, 2013, 08:33 AM
I have a couple of the older ones. These look like the insides are quite a bit different. I would email or call Lee and they will guide you with the reassembly. Might even find someone on youtube that shows how to do it. Might even have a broken part there to deal with. This was my first thought as things are not supposed to fall out of them especially after working well for a good long while.

aladdin
January 22, 2013, 11:07 AM
you should have two trays one for large and one for small. look at the other one to see how it is assembled.

If you enjoyed reading about "Please help a dummy with a Lee Auto Prime Hand Priming Tool" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!