This is 3/16" thick 52100 so it is going to need a finish (and I've got a great idea for that...it's going to look different!), and the blade width is 1-5/8". Blade length is 8-1/8" from the shoulder of the bevel to the tip. Overall length is 13-1/2". Handles are green canvas micarta, but they're just rigged up temporarily at the moment as I'll need to take them back off to do the final finish on the metal. Probably will make black canvas micarta pins again.
If you enjoyed reading about "A work in progress -- FINISHED!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
January 27, 2013, 03:37 PM
Excellent job !
January 27, 2013, 05:29 PM
Turning out very nicely, Sam. Love that handle.
January 27, 2013, 05:38 PM
Got enough keys? :)
Good looking knife.
January 27, 2013, 06:20 PM
That looks really good. Can't wait to see the finished product.
January 27, 2013, 06:27 PM
Now that's a knife!
January 27, 2013, 07:04 PM
8" is a hoss of a knife.
Looks a bit like one that I bought from Valkman back when he was making.
January 27, 2013, 07:16 PM
So is this your Sunday-go-to-meetin' knife :D
Any plans on a sheath?
January 27, 2013, 07:25 PM
I've worked on, finished, modified, and generally enjoyed Don's knives, and still have one or two of his blades here to finish someday. (No fighters, though.) He's been a great inspiration and encouragement and taught me a lot. If I hadn't picked up some of his "flavor" along the way, somehow I'd feel I'd failed. :)
(Personally, I think it sort of came out closer to the USMC fighting knife but noticeably larger, stronger, and with a handle that is ... well, very very good.)
So is this your Sunday-go-to-meetin' knifeHa! No...though the first knife I worked on was one of Valkman (Don)'s big fighters and I made a tuckable IWB sheath for it! Got tired of carrying that much blade around in my drawers, though. :D
That was this one:
Still my "Sunday go to meetin' knife" I guess! :D
Sheath? Of course! Whenever I'm done with fitting it up and finishing it, I'll make a sheath. Probably OD, or maybe black, kydex. Most likely with a large Tek-Lock as that just works.
January 27, 2013, 08:01 PM
Damn. ^^^ That one right above is great!
January 27, 2013, 09:03 PM
Nice grinds , hard to tell from the pict , but did you grind on a wheel or flat platen ?
January 27, 2013, 09:05 PM
That's all flat ground. I'm not such a fan of hollow-grinding for a heavy-use blade. This one isn't "delicate".
Properly termed, this is a saber grind.
January 27, 2013, 11:33 PM
I like that one a lot. Are you going for a bit-o "skull-crusher" at the end? Seems it would be a better (aesthetic-therefor opinion) continuation of the rest of the knife's elegance to have that radiused if not.
Makes me think of something Jim Bowie would be making were he at it these days.
Love that clip point!
January 28, 2013, 06:01 AM
The pommel is shaped a lot like my other handles (maybe a bit more pointed) but I decided to radius away the corresponding part of the handle scales just for a different touch. Well, and because I wanted to do this all "subdued" and can't find any thong hole tubing that's dark in color. So the ... uh, call it a "rescue-glass-breaker" end there sort of developed on its own. Not sure if I'll keep that on future versions or not. Depends on whether I feel it gets in the way or is unobtrusive.
Fortunately, with all normal holds I've tried on the knife, my hands don't cover or rest on that part of the handle scales, so there's no change in feel.
Some folks love the clip (:)) and some really don't. I've made the smaller version both ways and can't make up my mind, myself.
January 28, 2013, 06:06 AM
Well, the pics are TERRIBLE (5:45 am, indoors, dark, glarish, and oddly blotchy...go figure) but this is my first shot at a two-color finish on this blade:
I don't know whether to be a little miffed that it hides my nice straight grinds (:D) of if I should be confident enough to know that, of course the grinds hold up and I don't need to show them off! LOL.
January 28, 2013, 06:55 AM
Nice job Sam. I like the look a lot. Gonna to look great with those scales!
January 28, 2013, 06:54 PM
Tough call on that one. The lines are something to be proud of showing you're not just another fella walkin' steel into a grinder - but then - that's an interesting finish as well...
January 31, 2013, 01:35 PM
So I finally produced a camo pattern I like (loving the "ghost scales" on top of tiger stripe!) and went ahead and finished it up.
Awww...well, uh. No, not really. Just me. Honestly, I haven't convinced myself to let go of it yet. :)
That's a bad habit. :D
January 31, 2013, 01:51 PM
But a very understandable one...... :)
January 31, 2013, 02:18 PM
That is a very nice one! Your work has quite the artistic flair. Keep em coming.
January 31, 2013, 02:40 PM
Sam. Let it go, be free. You can make another one.:D One of the reasons I do not have any knives that I've made is that by the time I finish one I have exhausted all my enthusiasm for said blade and wish for it to go to a new home. Your knife looks to be a winner in my book!
February 1, 2013, 03:16 AM
Wow, that's a beautiful knife. I didn't even know you made knives, Sam. You're very talented.
You happen to do any custom or special order work?
February 1, 2013, 08:24 AM
Bobson, thank you very much! It is a skill I've been working on for about two years now. I've lost a lot of hide and fingernails in the process, but I'm starting to be pretty satisfied with some of my results. :)
I have done custom pieces, sure. At the moment I'm trying to work on a small-batch model where I do a few of something and then put them up for sale, which keeps me from promising folks something I can't manage to get them for 6 months. But if you want to suggest an idea for a pattern/form I'd love to hear about it, and maybe would consider putting that in my long-range plans.
February 1, 2013, 08:25 AM
Tim, ha! I know that feeling! But, but, but...I LIKE this one. :) I will make more though.
February 1, 2013, 11:00 AM
Where did the balance point end up?
February 1, 2013, 11:10 AM
Balance is about half-a-finger width in front of the handle scales.
February 1, 2013, 01:18 PM
February 1, 2013, 02:35 PM
That is some beautiful work, Sam.
February 1, 2013, 06:14 PM
John I made up a little test block to check balance. It's kind of hard to use, but does the job:
Good. Slightly less choppy than the Camp Defenders.
February 1, 2013, 09:40 PM
So what's the intended use/niche of this beauty? As far as size, it reminds me of the Ka-Bar 1212 I bought a few years ago. Super well made, but try as I might, I can't find a use for it. I just don't what the proper use for this kind of knife is.
February 1, 2013, 09:53 PM
I'm really not a good one to ask such questions as I find it hard (and often a little silly) to pigeon-hole knives since most of them could do a wide variety of tasks.
But, to try and answer, it is to my mind a large "field" knife. It is quite similar in characteristics to a slightly larger version of the Ka-Bar USMC fighting knife, or the old Cattaraugus 255 Q (http://www.thehighroad.org/showthread.php?t=685606), which were issued to soldiers to cover duties from chopping vegetation, to various kinds of bushcraft, to opening crates, to killing things.
It borders on the same tasks that our big Camp Defender can do, in light-medium chopping tasks but would work fine for dressing large game too, if a bit bigger than optimal for that task. (Well, if the game is BIG enough, it'd be perfect! :))
It'd be a great tool for that all-important task of batonning.