Sig P227 10mm? BADA$$


PDA






RonDeer10mm
February 9, 2013, 01:08 PM
If Sig made the P227 in 10mm would you buy one? I would :D Somebody tell Sig to get started making 10mm P227 mags LOL :D

If you enjoyed reading about "Sig P227 10mm? BADA$$" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
RonDeer10mm
February 9, 2013, 01:11 PM
It would probably be a 15 or 16 +1 capacity 10mm:D

RonDeer10mm
February 9, 2013, 01:14 PM
A Sig P227 MATCH 10mm :eek:

ugaarguy
February 9, 2013, 01:26 PM
Yes, as in probably. But only if they they offered it in SAO with a thumb safety, or DAK.

Sol
February 9, 2013, 01:33 PM
Someone converted a p220 into a 10mm, not sure how it worked, but I would buy one only if it was all stainless with beavertail.

Mainsail
February 9, 2013, 01:57 PM
http://gunsgunsguns.net/wp-content/uploads/2013/01/SIG-Sauer-P227-nitron-left-150x105.jpg

2zulu1
February 9, 2013, 01:58 PM
Buying a SIG, any model, in 10mm would not be on my purchase list.

JEB
February 9, 2013, 03:13 PM
i would say 'yes', but im waiting for the stainless Elite model :D

BrainOnSigs
February 9, 2013, 05:35 PM
GrayGuns does an incredible Sig P220ST conversion to 10mm.

Thompsoncustom
February 9, 2013, 05:55 PM
No matter the platform I think we need more 10mm's out there.

B!ngo
February 9, 2013, 08:33 PM
No, but that's because I'm left-handed. Sig's are particularly left-handed-unfriendly so, despite the fact that I have great respect for them, they are off my list. However, if I was right-handed and wanted a 10 (and I likely do), I'd definitely put them at or near the top. The alternative and likely winner would be the Glock 20 though...
B

orionengnr
February 9, 2013, 10:08 PM
No matter the platform I think we need more 10mm's out there.Mr. Thompson, I couldn't agree more.

tomrkba
February 9, 2013, 10:12 PM
Meh. 45 ACP is just fine.

But, more 10mm's is not a bad thing at all.

meanmrmustard
February 10, 2013, 06:55 AM
No matter the platform I think we need more 10mm's out there.
Absolutely agree.

el Godfather
February 10, 2013, 06:20 PM
Sig Sauer and H&K both need to make 10mms. Sig p227 and H&K USP 10 or H&K P30-10mm.

psyopspec
February 10, 2013, 09:37 PM
I wouldn't buy one, but I certainly value choices so I'd be very glad to see thheir entry on the market. However, I personally prefer not having to deal with 2 trigger pulls. Ergo my preferred 10mm would be a Glock 20 given platform familiarity.

Robert101
February 11, 2013, 01:10 PM
Hard to object to 10mm. Best defensive handgun cartridge available.

gpurp
February 11, 2013, 01:19 PM
I'd buy one.

mesinge2
February 11, 2013, 01:30 PM
Ya got my hopes up that they had started making them. Very mean.

IdahoSkies
February 11, 2013, 03:49 PM
+1 on more 10mm platforms. I wish someone would get around to making a thin single stack 10mm.

MTMilitiaman
February 12, 2013, 01:32 PM
I voted "no" even though I love the 10mm and would love to see more options for it simply because I have no interest in any traditional DA autos, regardless of what they are chambered in or what their capacity might be.

If it has a hammer, it has to be capable of cocked and locked carry for me to be interested in it. Period. Otherwise, I'll just roll with my Glock 20.

Bovice
February 12, 2013, 01:38 PM
I'm not really sure the P227 offers anything over the P220. Two more rounds in each standard magazine is it, and a wider grip. I have heard that they share the same slide, barrel, and guide rod/spring.

Bobson
February 12, 2013, 01:44 PM
Hard to object to 10mm. Best defensive handgun cartridge available.
How's that? Obviously that's totally subjective, but I'd like to know what makes it the best defensive handgun cartridge to you.

ATLDave
February 12, 2013, 01:55 PM
I'd have some concerns about a 10mm with an aluminum alloy frame.

PabloJ
February 12, 2013, 02:51 PM
If Sig made the P227 in 10mm would you buy one? I would :D Somebody tell Sig to get started making 10mm P227 mags LOL :D
No. I would rather get second Gen IV G20.

Girodin
February 12, 2013, 03:15 PM
I wouldn't mind seeing Sig make one as I would like more 10mms on the market. However, honestly I probably wouldn't buy one. I'd be much more inclined to buy a glock 20 if not a 1911 of some variety. I've owned and shot sigs and I've owned and shot glocks and I simply prefer a number of things about the glock. Not that there is anything per se wrong with the sigs.

sargents1
February 13, 2013, 04:40 PM
I would consider a Sig in 10mm, but they would have to sell it for close to what Glock sells for, none of this 1000$ business.

Also, they would need to have a properly supported chamber to allow max loads.

I ain't holding my breath.

Bovice
February 13, 2013, 04:46 PM
I would consider a Sig in 10mm, but they would have to sell it for close to what Glock sells for, none of this 1000$ business.

Also, they would need to have a properly supported chamber to allow max loads.

I ain't holding my breath.
If you've ever really handled a SIG, there's a reason why they have their price tag. There's a lot more work put into the individual item. They can't be sold at Glock prices, and I wouldn't want them to cut corners to do so.

With that said, if you have heard any of the case head support banter regarding .40s, you will know that SIG offers far superior case head support. If they produced a 10, I would expect that to be the case.

EBShooting
February 14, 2013, 07:01 PM
I quote my kids, "gimme gimme gimme!!!!!!"

If you enjoyed reading about "Sig P227 10mm? BADA$$" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!