knight muzzle loader


PDA






army_husbandky
February 20, 2013, 09:38 PM
Hey THR, been awhile since I logged on, but know I need some help. I've been shooting shotguns, rifles, pistols, hell, even alittle bow shooting, now for the next thing, muzzle loaders. Never shot'em, never messed with'em, so I bought a used Knight muzzle loader LK-93. Clean'd her up real good, took sheap sights and scope off and added new (much nicer) scope, changed out the but pad that was on it and added a sling, she is looking good. Sorry, after I cleaned it up it just looks awesome to me, but back to what I was sayin'.

Got her out to the range, using triple seven preformed pellets (got the 50/50 and the 50/30 so I can play with the charge alittle), got the hornady SSD or SST, can't remember, its hornady, got the big red tip on the end, and some 209 primers. Got'er out to the range, loaded everything up, put the primer in, pulled the trigger and nothing happened :banghead:, looked at it, the primers are not staying in place, and after some checking around, looks I had bought the wrong primers.

OK, been searching around the web for 2 days now, want to go hunting this weekend for some hogs, and I want to use this rifle. So here is what I need to know, someone told me that I needed #11 percussion caps, is this the #11M? I can find those easy, but I can't find the #11, plus Hodgon website said to use 11M for their powder. So, before I go stickin' the wrong primer into my rifle, please lend me alittle advice on this.

Thank you THR community

If you enjoyed reading about "knight muzzle loader" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
woodnbow
February 20, 2013, 10:24 PM
Can you post a picture of the breech?

army_husbandky
February 20, 2013, 10:29 PM
hhhmmm..........will get one up as soon as I can, don't know what the wife did with the camera, as soon as I can get a pic will post

Rembrandt
February 20, 2013, 11:02 PM
There's a difference in shotgun primers....I've got some old CCI #157's that were used for Remington hulls, then there are 209's and 209 magnum primers. Found the CCI #157's kept falling out of my inline....209's didn't.

mykeal
February 21, 2013, 12:37 AM
#11M refers to #11 percussion caps with a 'magnum' load; they produce more and hotter gas than regular #11s. They will fit, but you'll need the magnum load to ignite 777 pellets. Regular #11's may work but they will often result in hang fires, so reliability will be an issue.

josmund
February 22, 2013, 07:47 AM
I've shot a lot of #11 cap without the M and rarely if ever have had a hang fire.

Now, I do shoot loose powder vs. the pellets. You may want to look at picking up a powder measure and going loose. You can tweak the load for the best accuracy and the cost per shot is significantly lower.

Pancho
February 24, 2013, 01:48 AM
I'd take your breech plug with you to the nearest good gun store and try the different offerrings presented by the varies capp ,manufacturers

If you enjoyed reading about "knight muzzle loader" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!