Blueing a new opniel blade


PDA






OH_Spartan
February 24, 2013, 09:28 PM
I recently bought a brand new opniel carbon with the intent of blueing the blade in a specific pattern. I will then give it to a friend as a gift. I practiced on my old opniel and the blade took the blue very well. I tried to blue my friends gift tonight and can't get it to take a stain at all.

I have rubbed it with 400 grit paper, 03 and 000 steel wool and even ran it on my bisal wheel. It still won't take the blue. Before each attempt I wash with water then isopropyl then paper towel dry.

Does opniel have some kind of treatment in their blade that keeps it from staining? I know this sound like blade abuse, but how do I get it off?!

Ps...Choosing an opniel and choosing to blue it are probably only meaningful to my friend and I. an opniel would be more meaningful to him than a better knife and a stained blade better than a pristine blade.

If you enjoyed reading about "Blueing a new opniel blade" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
PRM
February 24, 2013, 10:11 PM
Sure it's not INOX - if it's stamped, you got a SS blade.

If its carbon, what you have done should have taken off any protective finish.

I've blued several with Birchwood Casey and it does give a nice patina.

OH_Spartan
February 25, 2013, 10:17 AM
That is exactly the problem. Frustrated with myself now...

Piraticalbob
February 25, 2013, 11:38 AM
New Opinel knives with carbon steel blades are marked "au carbone." Carbon steel will take bluing.

CWL
February 25, 2013, 03:46 PM
Does it say this on the blade?
http://www.opinel-usa.com/prodimages/large/No-13-Opinel-stainless-steel-blade-2.jpg

If so, you need to find one of these:
http://www.disclose.tv/shop/img/opinel-no8-carbon-pocket-knife_12730_500.jpg

Zeke/PA
February 26, 2013, 04:28 AM
I "patina" my Opinel Carbon Steel blades with French's Yellow Mustard.

Speedo66
February 26, 2013, 10:03 AM
By making sandwiches with it? :rolleyes:

Zeke/PA
February 26, 2013, 02:09 PM
By making sandwiches with it? :rolleyes:
Degrease the blade with a solvent like Mineral Spirits.
Apply mustard with a rag/towel .
Let it set for 30 minutes or so ,Rince in hot water then repeat process.
Real Simple and it DOES work!

OH_Spartan
February 26, 2013, 05:49 PM
My buddy and I continually one up each other with patinas on our opinel. Weve used Hot sauce apples mustard diet coke vinegar potatoes...just to name a few. This project was to take it to a new level. But alas I have now learned that they don't sell blue handled knives with carbon blades. I didn't even catch that fact when I ordered it.


I wonder how hard it would be to take it apart.....

Isaac's Grandpa
February 26, 2013, 07:00 PM
You could strip the finish off the handle and dye it with a blue analine dye under vacuum. The vacuum will pull the air out of the wood cells allowing the dye to penetrate all the way through.

If you enjoyed reading about "Blueing a new opniel blade" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!