Savage bolt owners


PDA






ldlfh7
February 25, 2013, 04:31 PM
Gentlemen -

I have a savage model 11 in 308. Been trying several different reloads but thought I would reach out and see if anyone has a similar firearm they have been reloading for. Any PET loads in the savage bolt rifle? I have IMR 4895, Varget and IMR 4064. I also have 150, 165 both hornady sst, and 150 gr core-lokts. Federal primers, and once fired commercial brass out of my rifle. Also lots of 1x fired lc brass.

If you enjoyed reading about "Savage bolt owners" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Centurian22
February 25, 2013, 04:35 PM
I'll tag this for reference. I have a .308 savage axis IMR4895 and Sierra matchking 168's and gameking soft point 165 and 150's. I'm assembling rounds for both OCR and Ladder load development methods.

vujade
February 25, 2013, 07:16 PM
Savage 10FP in 308. 20 inch barrel.

Varget: 41.9 grains + 168 SMK or Hornady Amax. 2.865 OAL.
RE15: 42.2 grains + 168 SMK or Hornady Amax. 2.865 OAL.

I load them pretty light but these are sub .5 MOA at 100 yards. Best way is to do an optimal charge weight test or ladder test and shoot what's best for your rifle.

vujade
February 25, 2013, 07:19 PM
I just did an OWC test for my Dad's Axis in 308 for his Christmas present. Factory groups were typically 1-2 inches benched at 100. I took it down to consistent .5 inches for 100 yard groups. (barrel heats up pretty quickly and they string)

41.3 grains of varget. 2.840 OAL. (I like to load them light as long as they are still accurate). And that light load is to help my Dad's older shoulder as well.

Skyshot
February 25, 2013, 07:55 PM
Model 200 Stevens, pretty much the same set-up as the M-11 Savage. I Shoot a 150 gr. Nosler Accubond with 46 gr. of Varget and it shoots 3/4 MOA. Also the 150 gr. Sierra Gameking with 44.gr. of IMR 3031 will put 3 in 1/2 MOA at 100 yards.

cowtownup
February 25, 2013, 08:05 PM
The Lymans Manual shows Winchester 748 powder having great speed and low chamber pressure in the 308 over a 150 grain bullet.. Has anyone tried the WIN 748 Powder?

Lethal Threat
February 25, 2013, 08:52 PM
Hornady 150gr SST bullets, Reloader 15 43.2gr powder, Winchester brass, Winchester WLR primers.
Savage 10 FP-SR.

If you enjoyed reading about "Savage bolt owners" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!