I'm about to start loading for AK 7.62X39. I currently reload .38 Special, .45 ACP, and 22-250...all of them for MAXIMUM accuracy. What is the consensus on the best primer/powder/bullet to load for max accuracy for the 7.62X39...boxer primed "brass' brass? Thanks guys...
If you enjoyed reading about "Best 7.62X39 Primer/Powder/Bullet?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
March 5, 2013, 10:59 AM
I personally use AA2015 because I reload both 7.62x39 and .223, and this is a good middle ground to cover both calibers.
March 5, 2013, 12:01 PM
I use 25 gr of H322---I plink or target shoot at 50 yards with Ruger Mini-30.
Using CCI 200 primers this is a light load---why tear your gun & cartridges to peices for plinking---these cartridges are hard to come by.
This is for a 123 gr jacketed bullet
March 5, 2013, 02:41 PM
I have had good results with H-4198 with Hornady 123gr SP and FMJ in a SKS.
I planned on using Accurate 1680 but H-4198 was $5 cheaper per lbs.
March 5, 2013, 04:18 PM
Any "Accuracy" loads?...
March 5, 2013, 06:31 PM
iT'S YOUR GUN---START RELOADING & YOU WILL FIND WHAT YOUR GUN LIKES
& WHAT IS IT'S ACCURATE LOAD
chris in va
March 5, 2013, 06:33 PM
Be sure to fabricate a brass catcher unless you like chasing brass. Been there, done that.
March 5, 2013, 07:13 PM
For an AK.....don't waste your time just buy some tulaammo 154g sp and be done with it.
Otherwise rem small primed brass, n120 and Berger bullets