1948 16ga Ithaca 37 restoration


PDA






drcook
March 8, 2013, 10:18 PM
I am restoring a 1948 Ithaca 37 16ga. The original post(s) are on Shotgunworld and the Ithaca forum.

I wanted to share this with you all so you can see what is possible with today's technology, ie: laser welding.

This post is posts put up over a couple days time, I didn't edit out the chronological parts, just cut and pasted it together.

Here are some pics of the 1948 as it was when I opened the box. It was a bit misrepresented. Next time I won't simply take a gunstore's word that it is a little rusty, even if they are supposed to be an upstanding institution over in the Poconos of Pa, right in downtown Stroudsburg, Pa.

The left side of the receiver is how it came out of the box at the receiving FFL. Needless to say, I was a bit perturbed at Dunkleberger's. They also fibbed about the knurling on the magazine nut as I was going to swap it onto another gun I am restoring. I guess gunstore employees and used car salesmen go to the same school.

The only salvation is I only paid $150.00 for it. Plus the barrel to receiver threads are as tight as can be. The safety is tight, all indicative of not much use.

Regardless, as I said, I am salvaging it. I have got all but the very worst pits out. They are too deep. What little is left will not be visible under casual inspection and the bluing should hide it pretty well. The gun is cleaning up/polishing out nicely. The only place any of the pits will remain is at the back of the left side of the receiver.

It will be going next week to get blued. I have a friend who will blue the entire gun for me for $40.00 with it being all polished out.

I bought some stripper and going to do the stocks. The mechanicals are good and tight, with the exception of the left hand shell stop spring, which we all know is a known Ithaca weakness.

I have bought new screws for the receiver.

The barrel is 28", modified and the barrel is ok inside.

After it is all polished out and the wood stripped, I will have new pics and of course will post the final result.

Too bad I don't have another 275.00 right now. The full choked 48 16ga at the local pawnshop is begging to be restored.

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405661086.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405661115.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405661117.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405661118.jpg

Work is progressing. All the rust and corrosion is removed from the pits. I have an email out to a company that does lazer welding to see if it is cost effective to send it to them and have them fill the pits in.

I didn't take a picture of the barrel, it has sanded out and polished perfect, as did the trigger guard and other pieces.

If this works out and they don't want too much, I will send it to them. I am also going to check a couple other places out also.

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405683822.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405683821.jpg

I received the actual estimate. $ 125.00 to fix the pits at locations 1 & 2 in the picture below.
Location #3 is just some minor "frosting", I can live with it as the setup and welding would be another $25.00. The bluing will hide it. The top will be glass beaded prior to bluing, so any minor imperfections on the top will be hid, blended in.

The barrel is all cleaned up, as is the trigger guard. All the rest of the parts are now rust free. I think I said I bought new receiver screws. All in all, this is going to be a 'nice" gun when I am done.

A friend told me about using 2 parts spar varnish, 2 parts BLO and 1 part turpentine or mineral spirits makes a really nice stock finish. I believe I am going to try it out.

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405783618.jpg

Back from being welded. Needless to say, as the below pictures testify, he does a really nice job. If I can find someone to touch up the engraving for a reasonable price, I will however, it is not as important to me as the pits being gone. The next set of pictures will be after I draw file it down and polish the weld flush. Then the final set will be after bluing is done.

Remember the first picture is what it looked like

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405661086.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405885815.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405885816.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405885817.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405885818.jpg

If you enjoyed reading about "1948 16ga Ithaca 37 restoration" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
BBBBill
March 9, 2013, 12:03 AM
Lookin' good! Can you share the name of your laser welder?

drcook
March 9, 2013, 04:19 AM
He didn't want it explicitely published as he mainly does industrial repair / welding. But if you google laser firearm welding you will see a handful of companies across the country that do it.

The important thing is bringing the technology to people's attention.

drcook
March 16, 2013, 10:51 PM
I have been redoing the stock also. The inletting for the action typically gets oil soaked. Acetone, kitty litter, Citristrip mixed with kitty litter all have been used to suck the oil out of the wood. Acetone will not hurt the wood but will remove finish of course.

Here are some pictures. As you can see, the acetone does not damage the stock.

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405923354.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405923355.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405923356.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405923357.jpg

http://pic80.picturetrail.com/VOL2063/10245039/18392501/405923358.jpg

drcook
March 16, 2013, 10:52 PM
Currently I am recutting the checkering and then going to redo the finish on the butt stock and foreend.*

Here is the results of receiver. The lazer welding technique is so superb ! There was absolutely no deformation of the action. If you are rescuing a prized single shot or building up a new shooter that needs some help, this is absolutely the way to go.

It is hard to get a good photo with the glare. The line (discoloration) is a shadow. Overall I am pretty happy about this. There are a couple scratches and some small pits that I can't get out without some very aggressive sanding and some of the engraving was lost (as to be expected).

While it is definitely not a silk purse, no longer is it a sow's ear.* The best part ?

I won't have to put a bag over my head with eye slits cut to hide my identity when I go hunting with this gun, nor will I have to be ashamed to lend it to someone.

All it took was a 6" single cut mill file, some abrasive paper and hard sanding blocks and a couple hours of time.*

http://pic20.picturetrail.com/VOL83/13578437/24317799/405970394.jpg

http://pic20.picturetrail.com/VOL83/13578437/24317799/405970393.jpg

http://pic20.picturetrail.com/VOL83/13578437/24317799/405970392.jpg

http://pic20.picturetrail.com/VOL83/13578437/24317799/405970334.jpg

NCsmitty
March 16, 2013, 11:12 PM
Nicely done, drcook, and no warping of the receiver. We look forward to the finished project.


NCsmitty

stan rose
March 17, 2013, 10:14 AM
That is a very nice job. Well done.

If you enjoyed reading about "1948 16ga Ithaca 37 restoration" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!