Where to buy CZ 452 Scope Rings?

[J Scott]

Subject asks it all.

Thanks,

J Scott

[hksw]

As far as I know, the 452 uses either a 3/8" (~9.5mm) or 11mm groove base, nothing proprietary. Basically, any set of rimfire rings (for those widths) that you can get at your lock sporting goodsorgun shop will fit.

For over the internet Midway, Natchez, Brownells, Cabelas, etc. will have them.

[J Scott]

Thank you very much.

J Scott

[hksw]

One note.

I don't recall what the top of the 452 receiver looks like. (I don't have one yet but I do plan on getting a .17 Varmint.) Some rimfire bases are flat like the Ruger 10/22's and some are round like the older round receiver Anschützes. I'm guessing that the 452s are round so keep that in mind and look at the bottom of the rings to match the contour of the receiver.

[rah225625]

the very best you will find are MILLETT. call them 800-MILLETT. i have four cz 452 two have milletts on them the other two are open sights. the 452 is one of the best .22's on the markert. hope this help you.:D ask for the 452 rings and they are 11mm.

[TheEgg]

IIRC, the "American" models have the 3/8" groove, all others have the 11mm grove.

For extensive discussion on CZ's, scopes and rings, go to www.rimfirecentral.com, and use the search function.

edited to correct stupid typo!

[hksw]

The American and .17 HMR Varmint have 3/8".

[TheEgg]

hksw


THANK YOU, yes I meant 3/8, but my fingers betrayed me. Will now go back and edit.

[hksw]

Eh, it happens. Its the reason for my signature line.