re-stock my rifle


PDA






Muzzlelover
March 21, 2013, 09:54 PM
I have a 700 bdl that I would love to get restocked but it's been beded and since I've never restocked a rifle I don't know if the stock will come off and if it does will it mess up the rifle?

If you enjoyed reading about "re-stock my rifle" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
EchoM70
March 21, 2013, 09:59 PM
If properly bedded a release agent would have been used making it so you can remove the stock... If not essentially the stock has been glued to the action/barrel.

dubbleA
March 21, 2013, 10:05 PM
The barreled action should be able to be removed from the stock if it was done properly ie. the use of an release agent. Simply remove the tang screw( the one behind the trigger) and the screw in front of the floor plate and the stock should separate. Sometimes a sharp tap with your hand wil help.

Abel
March 21, 2013, 10:06 PM
Just unscrew it and pull the barreled action off.

Bobson
March 25, 2013, 02:37 AM
Deleted.

If you enjoyed reading about "re-stock my rifle" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!