HELP.....really


PDA






Mike Sr.
April 2, 2013, 06:48 PM
I've called Savage arms and the info I get is somewhat WORTHLESS....grrrrrrrrr


I have a Savage Striker, stainless, 308, Repeater pistol.....

It has a muzzle brake on the end...I have successfully removed the brake.

At first I was told the thread were 5/8's x 24 perfect for my Suppressor.

I tried my Suppressor...the Suppressor threading was too wide..the threaded muzzle slid in and out ....

Then I thought my Outback 2 Suppressor 1/2x24 might work....the Suppressor female port was too small. Threaded muzzle would not fit....

I called GEmtec ..... no clue

CAN ANY ONE HELP...I need to get an adaptor.....:(:(:(

If you enjoyed reading about "HELP.....really" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
SilentScream
April 2, 2013, 07:00 PM
Might be 9/16-24, or possibly might even be metric 15x1

Kp321
April 2, 2013, 09:52 PM
See if you can borrow a micrometer or caliper and a thread gauge from a machinist. Can't make an adapter without knowing a starting place. Need to know the outside diameter and how many threads per inch on the Savage. I presume your suppressors are 1/2-28 and 5/8-24.

Mike Sr.
April 2, 2013, 10:00 PM
KP: ....your presume is correct

If you enjoyed reading about "HELP.....really" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!