Detachable Magazine .30-06 Rifles


April 7, 2013, 09:58 PM
I was hoping that somebody could point me in the right direction. I am interested in a .30-06 rifle that accepts detachable magazines with at least a 10rd capacity. I don't care if it is semi-auto or bolt-action but if the latter it needs to be available in a left-hand version.

If you enjoyed reading about "Detachable Magazine .30-06 Rifles" here in archive, you'll LOVE our community. Come join today for the full version!
April 7, 2013, 10:04 PM
Not a lot out there to meet that criteria...some high-end precision rifles with detachable mag kits, and things like the semiauto repro BARs. Why would it need to be .30-06 and not .308? There are a whole lot more options in .308, and the ballistics are basically the same.

April 7, 2013, 11:00 PM
Well because I already have a .308!


April 8, 2013, 12:18 AM
If money is no problem (and you can actually find one) then google "Cobb MCR-300". It's an AR-10 type rifle chambered in 30-06 that accepts modified 20 round BAR magazines. I think Cobb made 100 of them in 2006.

April 8, 2013, 01:16 AM
Remington 7400 or any of its iterations, but I would recommend a 7400 or 750 for enhanced reliability.

April 8, 2013, 04:08 AM
I would go with Remington 7600 as they have a floating barrel, (pump gun) and will utilize a 10 round mag available on the police patrol model made by Checkmate Industries on Long Island.
the Remington 760 might be had a little cheaper and they hold up a long time.

Do not even consider a Rem 742. About 500 rounds and they will go down on you. The 760 however will run 12,000 or better.

April 8, 2013, 08:24 AM
Rem 7400. There is an online shop that accurizes them and had hi cap mags.

April 8, 2013, 09:25 AM
I have a few 760s & 7600s, and one 7400. They are great sporting arms and, especially the pumps would be phenominal in a protracted austere situation (be it a camping/hunting trip or something of science fiction). The free floated barrels, etc +1 on everything hummer said. Get the steel 10rd magazines from triple K, and if you want a pistol grip buy a choate (or any other) 20guage remington stock with the features you desire. The recievers are the exact same size.

April 8, 2013, 12:37 PM
Is a M1 Garand close enough for you? Technically uses clips.

April 8, 2013, 12:37 PM
760 in -06, low pro scope... Yup, that's the ticket.

Don't be skeered by the slightly rattly nature of some of the used ones.

April 8, 2013, 12:45 PM
Get a CMP Garand and one of the Crawford Armory magazine conversion kits.!collection

April 8, 2013, 12:48 PM
I knew a guy who bought a 10 rd mag for his 7600 '06 in the late 80s, it didn't work, and cost him a deer. I would hope the ones available now are better.

April 8, 2013, 01:28 PM

That is the Elisio RT10 platform. You can install a variety of actions in these tubegun platforms. There is also a 10 round 3006 magazine for this system as per the article.

Voila! You have your 3006 hig capacity magazine platform!
Hope this helped!

P.s. this is the Elisio tubegun manufacturing site.

April 8, 2013, 10:59 PM
Dthunter - Thanks for that link to Elisio. There is some outstanding loading information there even if one wasn't interested in the rifle itself. And - the rifle's pretty cool too.

April 8, 2013, 11:02 PM
How about a 10rd magazine for a Remington 700?

April 9, 2013, 01:13 PM
Not to keep being a downer, but I would really question what the purpose of detachable mags on a bolt gun is, especially with a 10-round minimum size. How many mags are you going to buy? If it's only one or two (given the steep price tag of spares), what does that really get you? Most of the conversions kits are of dubious reliability, especially with 10-round mags.

April 9, 2013, 09:44 PM
I have a few of the Eagle 10-rounders for my 7600, and they work fine. i can't legally hunt with them in AZ, but I'll bet I could repel a bunch of boarders.
I know it shouldn't work this way, but the old girl gives me 1"- 1 1/4" groups with just about any good 180 gr. ammunition.

April 10, 2013, 12:05 AM
I knew a guy who bought a 10 rd mag for his 7600 '06 in the late 80s, it didn't work, and cost him a deer. I would hope the ones available now are better.
Had the same problem with a 7600.

April 10, 2013, 07:31 AM
Ten round mags for the 760 (and 740) were available from Remington at one time....should still be able to find some.

April 10, 2013, 07:52 AM
Savage 110 has a detachable 5rd mag. Somebody makes 10 rnd mags, but I don't know who.

April 10, 2013, 08:06 AM
742/7400/7600, etc. all take the same mag by caliber family...

All the calibers based on .30-06 (.35 Whelan, .270 Winchester, etc.) take the same mag in spite of what is stamped on it...

Same with the .308 family (.243 etc.)...

As for the "500rd" 'limit' on the 742, in my experience it's a tad higher than that before the bolt rails batter themselves into uselessness...The rails can be slicked up once, but I do agree if you are looking for a gun to shoot 100rds every week, look elsewhere...

April 10, 2013, 03:35 PM
No problem at all! The Elisio tubegun chassis is a great platform!
I had one built for a friend of mine. I am just finished working up loads for him, and mbe stretching it out to 1000+ yards.

There is some great load info for sure! I will be getting my Custom build back in a couple of months. I have gone with a blue printed and sleeved Rem 700 action, choate custom tactical stock, Sightron SIII, 6.5X20x50 scope, 1: 30" shilen select match barrel (1:10" twist) in 30-06, & 1: 30" shilen select match barrel in 280 Rem (1:8" twist).
I am really excited to try my first switch barrel platform!

April 10, 2013, 04:07 PM

April 10, 2013, 09:49 PM
How about a non-detachable 10rd magazine model 700?

April 10, 2013, 10:09 PM
if you guys want to get crazy with the eliseo, check out defiance actions. the neat thing about eliseo chassis is that they use a doughnut-shaped lug, unlike the standard remington 700 one that goes straight down. i.e. the action is contacting the chassis on top/bottom/left/right equally.

anyway, defiance makes an action with a round integral recoil lug for the eliseo. heavy as a brick, but dang is it solid.

here's a link

April 10, 2013, 10:14 PM
btw, inked, you can take a regular rem700 barreled action and drop it in several different left-handed chassis that i'm pretty sure are available in long action. they all take detachable magazines

do a google image search on these:
xlr-industries evolution (i have their lefty and righty, but both short action. they do make long actions)
accuracy international AICS chassis (I had a lefty short action with viper skins.)
rock solid chassis (dunno if they have a long action, but i have their lefty)

also look at whiskey 3, manners stocks with the "mini-chassis" option, and mcree

If you enjoyed reading about "Detachable Magazine .30-06 Rifles" here in archive, you'll LOVE our community. Come join today for the full version!