Lorcin .380 solution


PDA






Marksman243
April 11, 2013, 01:15 AM
I know that about 99.5% of you are going to say chuck it and by a real pistol, but I got it from my friends dad for $25 dollars and I like projects.
I know the Lorcin .380 is a cheap gun, and made cheaply. I know it's risky to shoot it. But from the pictures and stories I've heard( as well as the guns specs.) seem to indicate that the weakest ( and dangerous) part of the pistol is the slide itself, namely right behind the front sight. Since this part is made from some kind of cheap zinc-steel alloy, I'm pretty confident I you were to CNC a slide out of good 'ol American steel, then that would solve the biggest problem. I know it would cost at least $50 or so, but it's kind of special to me. Does anyone know of anything else(mechanically speaking) that's wrong with the lorcin?

If you enjoyed reading about "Lorcin .380 solution" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
gamestalker
April 11, 2013, 03:19 AM
I happen to have one that I haven't fired but a couple times. One thing I noticed that was horrible and feels like it is prone to failing, is the trigger system. Mine feels like sand grinding and nearly hangs up when returning. My Son was shooting a friends, it was rather new too, and the slide came flying off the frame. And when firing mine, I've actually thought it was on safe many times, because the trigger pull was so hard, rough, and long. It took everything I could muster to get it to fire.

Good luck trying to refine and strengthen that piece of junk, please take no offense. I really think that they are one of the most dangerous firearms produced. I also own a couple of el cheapo Hi Point .380's and 9mm boat anchor's that I bought NIB for $100., but at least they don't look or feel like they will fall apart in your hand like the Lorcin.

GS

Marksman243
April 11, 2013, 08:05 AM
I know I would be better off just getting another pistol, but I like stuff like this. The thing your talking about I think is the cam. I noticed that the pin on it is shorter than it should be, and this results in it sliding out of the cam, making it impossible to release the firing pin. I think this one is a simple fox though, I'm just going to get a steel rod the same size and cut it down so that it fits perfectly. I have a Jennings nine, but I'm not even going to try and fix it(sear is busted)

kim breed
April 11, 2013, 08:26 AM
At least you can practice some gunsmithing, and learn the operating system

rtz
April 11, 2013, 12:20 PM
You might ask here for some more detailed info: http://www.bryco-jennings-jimenezarms.com/forum/

Kiln
April 12, 2013, 06:44 AM
The main problem with them is the slide, as you noted in your initial post. Then there are problems with the mags. If you correct the magazine issues they can be made reliable but will most likely have a short lifespan because of a thinly designed zamak slide.

Cobra firearms actually bought the designs from the Lorcin guns after liability lawsuits shut them down and the former still produces the latter's pistols. Cobra did redesign the slide assembly however to fix the known cracking issue.

Cobra also makes pistols from Davis (P32, P380, various derringers), Talon industries (steel slides rather than zamak alloy), and Republic Arms.

Following the link from the above post and asking questions will net you more information. I'm a member there and the guys there have an impressive collective knowlege of cheap pistols.

If you enjoyed reading about "Lorcin .380 solution" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!