Good sharpeners and methods for knives and hachets?


April 21, 2013, 01:48 AM
I'm new to sharpening knives and hatchets, so what are some good sharpeners for shop and field use and also what sharpening methods do people like best?

If you enjoyed reading about "Good sharpeners and methods for knives and hachets?" here in archive, you'll LOVE our community. Come join today for the full version!
April 21, 2013, 07:45 AM
I like freehand.
For uniformity and ease of use Lansky a Gatco systems can't be beat.
Good luck

April 21, 2013, 07:57 AM great. Paper wheels are nice also.

April 21, 2013, 09:59 AM
I tried the Lansky system and found it awkward to use, I get a better edge freehand than using the contraption, on the other hand, their stones that go with the system are very nice. I use those for freehand, the ceramic stone is really nice in there.

April 21, 2013, 10:28 AM

April 21, 2013, 10:59 AM
If your good at free hand here's the best one I have ever found. Here's the system I use and finish with a good strop on the leather You can shave with your knife when your done.:D

This the web page of where I buy my sharping tools.

April 21, 2013, 11:49 AM
For knives I use an old boy scout stone. Stainless blades take a little more finesse and carbon no time at all.

For hatchets, axes, and shop scissors I use a fine file.

April 21, 2013, 11:58 AM
A Spyderco Sharpmaker is about as idiot-proof as it gets.

I use one.

April 21, 2013, 12:40 PM
Yup , a sharpmaker and a nice ceramic rod for touchup and you will find yourself using the aggressive grits less and less.

April 21, 2013, 11:46 PM
Thanks for the suggestions. I looked at the Gatco and Lansky systems, and it looks very awkward to use and too many parts. I can see myself losing parts in the field.

The Spyderco Triangle Sharpmaker looks promising as it has less parts.

I really was hoping I could find a good whetstone that would handle all my sharpening needs.That might be asking too much since I have serrated blades also.

Baldy, could I do serrated edges with the 8" DMT DuoSharp you recommended? Which of the sets do you have? The Website states "The fine/coarse or the fine/extra coarse stones are great stones to own if you're going to own just one stone."

Bartholomew Roberts
April 24, 2013, 09:24 PM
The problem with the Sharpmaker is it only does 15 degree and 20 degree angles. Both of those are real common; but if your knife uses something different, you are going to be working a long time to raise a burr with the Sharpmaker's included stone. You can buy a coarser and finer rod to supplement the Sharpmaker; but then you start hitting the cost of more capable sharpeners.

On hatchets, I have an Estwing and just use a 600 grit diamond stone and freehand it doing my best to match the existing angle. That is working well for me right now.

April 25, 2013, 12:28 AM
Best knife sharpener I've come across and used.

Maintains the angle, easy to set up and use.

Didn't realize I had so MANY knives until I started sharpening all of them :uhoh:

April 25, 2013, 07:00 PM
Yes out of the sharpeners I've tried - Sharpmaker included - the Wicked Edge system is by far the best and easiet to use. Of course it costs WAY more that the others talked about here but I'm very happy with mine.

April 25, 2013, 10:05 PM
Bader is faster ;)

April 26, 2013, 05:07 PM
Yep, I used to have one!

April 28, 2013, 07:21 PM
Which Lansky kit would a guy want to get, if that was the system of choice?

Double Naught Spy
April 28, 2013, 10:55 PM
Accusharp - $7-9

May 10, 2013, 09:10 PM
6 inch mill basterd file.

May 10, 2013, 09:15 PM

This what I use a lot.

May 10, 2013, 10:21 PM
I use a 2x72 belt sander.

If you enjoyed reading about "Good sharpeners and methods for knives and hachets?" here in archive, you'll LOVE our community. Come join today for the full version!