Need an extractor


PDA






ole farmerbuck
May 18, 2013, 12:49 AM
I'm looking for an extractor for a J C Higgins model 31. It's a semi auto that shoots s,l and lr. It has a sling that retracts into the stock. Pretty neat old gun and in real good shape.

If you enjoyed reading about "Need an extractor" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
BBBBill
May 18, 2013, 01:03 AM
It was made by High Standard for Sears.

Manual -
http://pdf.textfiles.com/manuals/FIREARMS/jchiggins_31.pdf

Parts list -
http://www.histandard.info/manuals/s.../0440D150R.pdf

There were three different extractor types used over the production run, so you will need to identify which type you have.

ole farmerbuck
May 18, 2013, 07:52 AM
I had someone try to find the part but I dont know how hard he tried. I figured someone on here might have one or know where to find it. Your parts link didnt work for me. Thanks

Reloadron
May 18, 2013, 09:05 AM
This link should work. (http://www.gunpartscorp.com/Manufacturers/JCHiggins-33318/Rifles-36733/31-38860.htm)

As mentioned you need to figure out which extractor you have. Extractor, .22 Cal. (Claw Type) or Extractor, .22 Cal. (Flat Stamped Steel Type). Both seem to be available from Numrich Gun Parts Corporation.

Ron

Tommy Medlin
May 18, 2013, 09:17 AM
You could just get one of each from Numrich,they shouldn't be that expensive.Just a thought !

ole farmerbuck
May 18, 2013, 08:23 PM
Thanks Ron. I think I need the stamped on according to the guy that messed with it. I might order both and then I should get the right one!

Reloadron
May 18, 2013, 08:29 PM
Cool! :)

Ron

dprice3844444
May 22, 2013, 01:13 AM
http://www.wisnersinc.com/rifles/I-K.html
http://www.gun-parts.com/histandard/

ole farmerbuck
May 22, 2013, 07:38 AM
Did these models have serial numbers? I cant find one so I went ahead and ordered both from Numrich.

4v50 Gary
May 22, 2013, 11:07 AM
Thanks dprice3844444. I didn't know Wisner's was still around.

If you enjoyed reading about "Need an extractor" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!