Need help with 45ACP brass SPP


PDA






Carmmond
July 28, 2013, 12:33 PM
First thanks for all your help I have been reading this forum for over a year now and Iím ready to start reloading minus the brass. I have bought a Hornady LNL all the dies, powder, small primers, Berryís bullets for loading 45ACP and 40cal. I want to start with the 45 and need brass. I wanted to load with SPPís because with loading 40 and 45 I will only need the one size of primers.
Now the question I have found brass in two places but the brass on Midsouth sounds like itís not used for my 1911 and the one on Midway looks like it is. Are they the same brass or not? Does anyone know were I could get once shot brass with SPP in 45ACP? This is the last thing I need to start and you can imagine Iím at the end of my funds.

http://www.midwayusa.com/product/932650/rws-reloading-brass-45-acp-box-of-500-bulk-packaged

http://www.midsouthshooterssupply.com/item.asp?sku=0061745ACPSP

Thanks for your help.

If you enjoyed reading about "Need help with 45ACP brass SPP" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
buck460XVR
July 28, 2013, 01:10 PM
.45 ACP brass is .45 ACP brass. If your gun is chambered for .45 ACP both will work. Lots of places for buying 1X brass. Goggle is your friend.....if not someone will come along with a link.

Conservidave
July 28, 2013, 01:39 PM
"Iím at the end of my funds"

When I started reloading .45 most if not all of my brass was once fired factory stuff that I had been purchasing in the months before. Now I have a ton of "pick ups" that I have salvaged from local shooting spots in both LPP and SPP cases. In time you'll have all the brass you need and as a beginner it helps to work in small batches any way while you're learning the ropes.

Dave,

bds
July 28, 2013, 01:56 PM
PM sent to OP.

rfwobbly
July 28, 2013, 04:15 PM
Look in the Reloading section of For Sale & Trade Forum at the bottom of the main page. There's good prices on brass there all the time.

bds
July 28, 2013, 04:37 PM
rfwobbly, that was the first place I checked for the OP. Search showed no recent posting of small primer 45 brass for sale - http://www.thehighroad.org/search.php?searchid=11855419

I PMed the OP with one online vendor link for once-fired small primer 45 brass and my offer for 40/45 small primer brass.

Rule3
July 28, 2013, 04:48 PM
To the OP, that is insane to pay that much for brass. Plus they are both the same product. Look for once fired brass or as I see some nice members have already contacted you:)

Carmmond
July 28, 2013, 08:52 PM
PM sent to you bds.

Thanks everyone I thought it was the same just was not sure. I've been shooting all my life and have well over 1000 maybe even 2000 40cal brass and have had the Hornady LNL and everything for the 40 for almost 3 years. The posts for reloading 40S&W have held me up on trying and I just got my first 1911 4 months ago and have all but the brass for that now. I just wanted to get the 45 with the same primer size because I have 5000 of them on hand.

Thanks again eveyone for your input and help.

Miata Mike
July 28, 2013, 11:35 PM
Do you live any where near the Fox River Valley?

Carmmond
July 29, 2013, 12:22 AM
Miata I'm in the Waukesha area.

Miata Mike
July 29, 2013, 12:48 AM
Ok. If you were in my area I would have tried to get you going somehow. I loaded all of my small primer brass back in May. A few packs of large primers wouldn't be the end of the world until you locate enough small primer brass.

bds
July 29, 2013, 02:46 AM
PM response sent to OP. Sorry for the late reply, came back late from dinner. :D

Springfield0612
July 29, 2013, 07:44 PM
I swapped out 1000 LPP .45 for 1000 SPP .45. Once I get done shooting up the rest of my 1000 reloaded .45 LPP I'm swapping that out for SPP as well. Just keep your eyes out and network. Don't be affraid to put out a WTT add. Brass is as good as money in many circles trade wise. You'll get there!

bds
July 29, 2013, 08:42 PM
"Paying forward" some small primer 45 brass for OP to get started.

Hondo 60
July 30, 2013, 11:09 AM
The brass you linked is just fine (although I'd get once-fired brass, rather than new).
But why would you think it's not for your gun?
Not trying to flame you or be a smart aleck.
Just trying to find out why.

As buck460XVR said .45 ACP brass is .45 ACP brass. If your gun is chambered for .45 ACP both will work.

hddeluxe
July 30, 2013, 09:57 PM
BDS and OP:

Good on ya BDS for the paying it forward. OP--If you still need some SP brass let me know and I will be willing to "pay you forward" some as well.

If you enjoyed reading about "Need help with 45ACP brass SPP" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!