Ruger's New .22LR Bolt Rifle


PDA






ultramag44
September 14, 2013, 08:38 PM
The LGS got one, a 22" .22 lr. I asked if they would throw in a pair of Weaver #12's @ that price. They checked, no #12's on hand. They checked their wholesaler; #12's on backorder! :eek: I got a small discount anyway.

I got home and checked Midway, #12's on backorder! :eek:

Then I remembered I had a set of used #16's w/ screws. They were just a tad proud of seating on the Ruger AAR receiver, but the holes lined up perfect. :) I used the lapping process outlined here to make them a perfect fit! :t http://www.jmtpublishing.com/mark_bio.asp

I had a set of Burris Signature Zee rings ready to go. They are mounted.

The trigger (Lawyer) spring is totally superfluous. It was removed (a 2-minute job). The accu-blade spring re-sets the trigger just fine. The trigger is now a very crisp 1-5/8#. :)

I set the action screws to 12"#

The chamber is sporting type. I expected this.

I slugged the barrel. Once pushed into the leade , a slug seems to glide all the way through. There is no choke toward the muzzle.

The rifles' fit & finish is excellent! Crown looks perfect. The bolt glides very smoothly. I put a primed case w/o bullet or powder in the chamber and popped the rim. The pin indent is positive.

I have not decided what scope to use yet. A 4-12 Luey? An original Gloss Burris HBR 6X? Or........decisions! Wait! I have a Weaver CKT-15 15X that's not busy @ the moment :D

http://i137.photobucket.com/albums/q228/ultramag44/Ruger%20AAR/RugerAARa_zpsb867f17d.jpg

Weaver # 16 bases lapped to the Ruger receiver profile :bthumb:
http://i137.photobucket.com/albums/q228/ultramag44/Ruger%20AAR/RugerAARb_zpsb50bc762.jpg

Burris Signature Zee Rings
http://i137.photobucket.com/albums/q228/ultramag44/Ruger%20AAR/RugerAARc_zpsf31e039f.jpg

UPDATE:

Mounted the Weaver (Japan) CKT15 15X
http://i137.photobucket.com/albums/q228/ultramag44/Ruger%20AAR/RugerAARd_zps517afe36.jpg

The scope barely clears the rear sight.
http://i137.photobucket.com/albums/q228/ultramag44/Ruger%20AAR/RugerAARe_zpse0273d0b.jpg

If you enjoyed reading about "Ruger's New .22LR Bolt Rifle" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
berettaprofessor
September 14, 2013, 09:08 PM
Yeah, I saw one at my LGS today. It's intriguing, but unfortunately, I'm not splurging on a right hand bolt 22....if it was left handed, it might already have been purchased :)

Geno
September 14, 2013, 09:10 PM
Those are nice looking rifles. Thanks for the post and photos.

Geno

Crowcifier666
September 14, 2013, 09:30 PM
Looks good with the pink. ;)

ultramag44
September 14, 2013, 09:35 PM
Geno, You are quite welcome!

This rifle is 100% American made! :) It takes 10/22 magazines. It comes w/ 2 buttstock assemblies (one for iron sights, one for scope height). The factory trigger (once the silly spring is removed, a 2 minute job) is EXCELLENT. The synthetic stock is not a cheap 'Tupperware' job like a certain rifle that starts w/ "S".

Remington, w/ the exception of the Custom Shop 547's (prices start @ $1,200) is out of the .22 bolt gun market. I see the all-new Ruger as the catalyst to motivate Remington to bring back the either 504, the 5-Teen series or the 541 series. Remington may create an all-new series of .22 bolt guns to get a piece of this market share.

Geno
September 15, 2013, 06:21 PM
ultramag44:

I wish I had bought the M541-T and the M541-S rifles that I found on sale about 10 years ago (NIB). :o My bad.

Without a doubt, I would like to handle one of these American .22LRs, and for that matter, the American Rifle perhaps in .243 Win.

Geno

If you enjoyed reading about "Ruger's New .22LR Bolt Rifle" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!