Bubba Knives:Modified Production Knives


PDA






Sam Cade
October 28, 2013, 02:11 PM
Sometimes Bubba gets tired of gunsmithing with a pipe wrench and goes to work on a perfectly good knife.


Beckers seem to be especially attractive for the tender ministrations of Bubba's love. :evil:

BK9 stripped for food prep, Grivory scales selectively stippled and sanded. Bubba left the northern portion smooth so as to not abrade his hands with heavy pinch-grip chopping.

http://www.thehighroad.org/attachment.php?attachmentid=190546&stc=1&d=1382979964

http://www.thehighroad.org/attachment.php?attachmentid=190547&stc=1&d=1382979964

If you enjoyed reading about "Bubba Knives:Modified Production Knives" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Outlaw Man
October 29, 2013, 11:40 AM
That looks a LOT better than what I was expecting from the thread title.

hso
October 29, 2013, 12:13 PM
Yeah, that's hardly "Bubbaed". Slap some ratty upholstery micarta wrap on it and strip the finish so you can acid pattern the surface with discount yellow mustard if you're going to tease us that way.

Sam Cade
October 29, 2013, 12:45 PM
I'm going to have to find something uglier. *rummage rummage* :evil:


I'm surely not the only one who isn't afraid to attack a production knife with tools and chemicals and bend it to my will. :D



Lets see your masterpieces....or trainwrecks.

hso
October 29, 2013, 03:40 PM
Using your wife's flour sack bloomers for "momcarta" wrap handles was about the most impressive thing I've seen in loooooong time.

Sam Cade
October 29, 2013, 07:03 PM
Ok...call this one battling bubbas.

Finally got around to rehabbing the poor guy in this thread:

http://www.thehighroad.org/showthread.php?t=718536&highlight=cold+steel


..and it now looks like this:
http://www.thehighroad.org/attachment.php?attachmentid=190590&stc=1&d=1383084218



I'm not fond of spine side guards. ;)

Sam Cade
October 29, 2013, 07:06 PM
Using your wife's flour sack bloomers for "momcarta" wrap handles was about the most impressive thing I've seen in loooooong time.

I think that if I used up ALL of my wife's undies I might have enough material to do one wrap.

:evil:

desidog
October 30, 2013, 12:32 PM
Well, i clicked on this thread thinking of
http://www.bubbablade.com/ tv ads...

Sam Cade
October 30, 2013, 12:35 PM
http://www.bubbablade.com/ tv ads...

The things I miss by not having TV.

http://www.bubbablade.com/media/catalog/product/cache/1/image/628x421/9df78eab33525d08d6e5fb8d27136e95/p/e/penetrator_withetching_lo-res.png

Bubba Blade 7 inch Penetrator Tactical/Survival Knife a.k.a. "The Beast" :rolleyes:


:D

hso
October 30, 2013, 12:55 PM
Golly, that thing has several points of failure built right in!

scramasax
October 30, 2013, 03:10 PM
;)Looks like a knife designed by a video gamer.

Mat, not doormat
October 30, 2013, 10:36 PM
I haven't got a pic of it, but my favorite Bubba knife was a classic Buck folding hunter, the 110 model I think it's called, which someone had tacticooled. It had been drilled and a Phillips screw head emplaced as a thumb stud, the blade had been half serrated with a triangle file, and a sheet metal pocket clip added.

MErl
October 31, 2013, 10:14 AM
Looks like a knife designed by a video gamer.
Bubba Tools (http://www.bubbablade.com/)
Built by Gamers for Gamers

hso, what are the points of failure built in? I see the deep cuts in the spine, what else?

hso
October 31, 2013, 10:38 AM
They're published hardness is too high for a knife of that design and other forums have been critical of their customer service when edges chipped out and tips broke.

The "saw teeth" on the back that caught your eye are the most glaring potential points of failure. The tang has to be dramatically reduced with a right angle to fit into the handle instead of transitioning. The tip is pretty pointy for the hardness.

It's a knife designed by marketers instead of knife users.

GLOOB
November 1, 2013, 05:18 AM
Most of my working knives are bubba'd in some way.

http://i688.photobucket.com/albums/vv241/gloob27x/DSCF5902_zpscdc6f856.jpg

It looks like I'm addicted to wood handles and carbon blades. Anyhow, from top to bottom:

1. Opinel #8. The head of a toothbrush is screwed and epoxied to the bottom of the handle. And a thumb notch is Dremeled into the side of the blade where the "carbone" stamp was.
http://i688.photobucket.com/albums/vv241/gloob27x/DSCF5905_zpsdeffeb1c.jpg

2. Mora #2, convexed and handle thinned.

3. Mora #1, convexed

4. Mora #2/0, convexed

5. Mora #1, blade chopped to ~2 1/2" and convexed. Handle slightly shortened. I purposely left the tip and belly obtuse for holding a toothy edge.

The handles were burnt with a torch and treated with flaxseed oil. All of the convexing was done with an upside down portable belt sander. :)

MyGreenGuns
November 1, 2013, 05:53 AM
The head of a toothbrush is screwed and epoxied to the bottom of the handle.

Forgive me if this is a stupid question.
But why would you want a small brush on your knife?

GLOOB
November 1, 2013, 06:34 AM
It's not for brushing my teeth. :D

I have used toothbrushes for cleaning gun parts, springs, gears, sandpaper, files, hair clippers/shavers, mutli-blade safety razors, computer keyboards... who knows what else?

I try to keep at least one or two old toothbrushes on hand, but I can never seem to find one when I need it. I have used up countless gun patches and Q tips where a toothbrush would have actually worked better. And even when it doesn't work better, a toothbrush practically never wears out. Anyone who has watched war movies depicting boot camp knows that one toothbrush is good for at least 100 toilet cleanings. Plus, I got brush envy after seeing the Opinel mushroom knife. :)

hso
November 1, 2013, 09:17 AM
I thought you'd made your own mushroom knife.

Outlaw Man
November 1, 2013, 02:18 PM
They're published hardness is too high for a knife of that design and other forums have been critical of their customer service when edges chipped out and tips broke.
But it has a "guard to protect you from the blade," so it's all good. :D

Deltaboy
November 7, 2013, 10:55 PM
Good Bubbaing Sam.

25cschaefer
December 4, 2013, 12:21 AM
Here is my submission, it is one of those dorky Ka-Bar tactical knives, my brother wanted it to look cool.I sharpened the back, acid etched it, and blued it.

http://i1249.photobucket.com/albums/hh518/25cschaefer/Facebook/Timeline%20Photos/1425316_10153585974360083_1000726436_o.jpg (http://s1249.photobucket.com/user/25cschaefer/media/Facebook/Timeline%20Photos/1425316_10153585974360083_1000726436_o.jpg.html)

Deltaboy
December 4, 2013, 11:00 PM
LOL Sam does some good bubba work.

hso
December 4, 2013, 11:57 PM
Nice job on the etch and bluing!

Sam Cade
January 23, 2014, 08:41 PM
I got conned into helping lay some carpet today and took the opportunity to use a Kershaw 3850BLK un-assisted, 3Cr13 (roughly equivalent to 420J2) bladed "Swerve" from the Wal-Mart Christmas 3-knives-and-a-flashlight-for-$20 package.

It worked. No drama. Didn't hold an edge worth a toot. No chipping or failures on the nasty dirty carpet. Easy to sharpen.


Regular Swerve here:
http://kershaw.kaiusaltd.com/knives/knife/swerve

The knife is a cheapy, and free of obvious defect but I like to tinker.

The powdercoat finish was a bit rough and wasn't conducive to smooth opening so I pulled the blade out, removed the studs and polished the finish away from the flats and pivot. That slicked the action up a great deal. Now it can be flipped open without pitching the knife like a fastball.

Note how rough the blade is under the powder coat.
http://www.thehighroad.org/attachment.php?attachmentid=194014&d=1390522621

So I'm looking at this knife and I think to myself, "This knife needs a Wave in celebration of Kershaw's recent Emerson collaborations!"
Off to my bitterly cold, unheated shop I go.
Grinding on an already heat treated knife always carries the risk of ruining the blade if you aren't careful with the heat.
I use a cup of ice to keep the blade extra-chilled and only keep the blade on the belt for 10 seconds at a time, just long enough for the dampness to start crawling away from the area being ground.
http://www.thehighroad.org/attachment.php?attachmentid=194015&stc=1&d=1390523474

A few minutes work gets us to this point:
http://www.thehighroad.org/attachment.php?attachmentid=194016&stc=1&d=1390523940

With just the plunge cut from a belt we have a functional "Wave" but it sure would be hard on pockets.
http://www.thehighroad.org/attachment.php?attachmentid=194017&stc=1&d=1390524019

Sam Cade
January 23, 2014, 08:47 PM
Contouring the Wave cut a bit and paring back the texture on the scales under the clip.

http://www.thehighroad.org/attachment.php?attachmentid=194018&stc=1&d=1390524378

Not bad. Needs a bit of finish work, but, not bad. ;)
http://www.thehighroad.org/attachment.php?attachmentid=194019&stc=1&d=1390524378

Deltaboy
January 23, 2014, 09:45 PM
Good work Sam.

bikerdoc
January 23, 2014, 09:51 PM
Some would say why?
You and I say why not!
Nice job.

wgaynor
January 23, 2014, 10:32 PM
Nice!

MrCleanOK
January 24, 2014, 10:54 AM
Kabar short TDI, sanded the finish off, made micarta grips.

http://img.tapatalk.com/d/14/01/24/yjuzemyp.jpg

Sam Cade
January 26, 2014, 05:57 PM
Take two.

The Utilitac II from OKC is a pretty good knife for the money.
http://media.midwayusa.com/productimages/880x660/Primary/968/968320.jpg

The thumb studs stand a bit proud of the scales leading to a dangerous condition where, occasionally the blade would partially open when drawn from the pocket if carried in a tip up position.
:scrutiny:
This is not cool and must be rectified.

The studs are easily unscrewed and removed. Teensy weensy threaded portion.
http://www.thehighroad.org/attachment.php?attachmentid=194112&stc=1&d=1390772845
http://www.thehighroad.org/attachment.php?attachmentid=194113&stc=1&d=1390772845

..and a quick trip to the pond to fill up our ice bucket before we head to the grinder.
http://www.thehighroad.org/attachment.php?attachmentid=194114&stc=1&d=1390773282

Sam Cade
January 26, 2014, 06:07 PM
..bet you thought I was going to shorten the studs right?
:D

I cut out a "Wave" using a similar procedure to the last time. The Utilitac II is a great candidate for this since there is a pronounced spine side swell near the hole for the thumstud.
The knife is a bit recurved so I made the spine side slightly serpentine. I think it is an aesthetic improvement over the factory blade shape but the Utilitac II with this grip shape is one of the most profoundly ugly pocket knives ever made so it would be hard to make it worse. ;)
http://www.thehighroad.org/attachment.php?attachmentid=194115&stc=1&d=1390773557

The Utilitac II is a very glove friendly folder with the large cut-out allowing access to the liner-lock.
http://www.thehighroad.org/attachment.php?attachmentid=194116&stc=1&d=1390773557

Hometeached1
January 30, 2014, 11:59 AM
But Sam it's a collector's first production run!:D:neener:

Sam Cade
January 30, 2014, 12:35 PM
But Sam it's a collector's first production run!:D:neener:

I've yet to see one that wasn't. Since the knife was introduced a couple years ago (this one was new from an Amazon vendor) I have to wonder if that first production run may have been a bit optimistic. :D

9mmforMe
January 30, 2014, 08:48 PM
Good job, Sam...and I like the new profile of the blade better than the old...Now its a 1st Production Cadilitac. ;)

Loosenock
January 30, 2014, 11:45 PM
Certainly not as cool as what has be posted but here is a mess of old kitchen and butcher knives I Bubba'd up for camp, hunting and trapping knives.

http://i6.photobucket.com/albums/y220/loosenock/repurposedknives002_zps1461fe07.jpg

http://i6.photobucket.com/albums/y220/loosenock/grshiv006_zps6444a69a.jpg

http://i6.photobucket.com/albums/y220/loosenock/hammerknife006_zps5d121570.jpg

I carefully cut the original blades using a fine cutoff disc on a Dremel tool and then reprofiled the blade and edge using a belt sander.

I could make two bubba knives out of some of the longer butcher knives.

'loose

theotherwaldo
January 31, 2014, 01:02 AM
I liked your Kershaw Wave Bubba job, Sam. The knife looks good and functional - and now you can open beer bottles with it, too!

Giterboosted
February 1, 2014, 01:05 AM
Fwiw my utilitac isn't 1st pro run, still love it tho, maybe you should offer some services Sam

9mmforMe
February 1, 2014, 01:37 PM
Loosenock,

I like what you've done there.

If you enjoyed reading about "Bubba Knives:Modified Production Knives" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!