38 special load needed 358477 mold


PDA






LUCKYDAWG13
November 7, 2013, 08:48 PM
hi all looking for a 38 special load using bullseye / RedDot / 231
for powder and 150gr bullets from Lyman mold 358477 i have a
load that i like with 357 brass but i just got a bunch of 38 brass
to use up so if you have a pet load i can use one this will be shot
out of a 3" SP101 just for punching paper and banging steel
thanks

If you enjoyed reading about "38 special load needed 358477 mold" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
November 7, 2013, 08:56 PM
Bullseye 2.8 Start - 4.0 MAX.
W-231 3.5 Start - 4.7 MAX.

Red Dot ??
I use 3.5 with a 158, and it should work as well with a 150.

rc

LUCKYDAWG13
November 7, 2013, 09:02 PM
thanks RC

Jesse Heywood
November 8, 2013, 01:53 AM
I had a batch of 152 gr wadcutters. No chrony. Best loads.
Bullseye - 2.6 gr
Red Dot - 2.5 gr

If you have any IMR 7625, 2.7 gr was my best overall.

If you enjoyed reading about "38 special load needed 358477 mold" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!