zouave


PDA






tddavis26
November 16, 2013, 01:29 AM
where can I get minei bullets for my 58. cal zouave ? or dose any one have a better suggestion on what I should shoot for hunting

If you enjoyed reading about "zouave" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
forward observer
November 16, 2013, 01:47 AM
There are several source on the net, but I would trust this place since they are devoted to black powder shooting.

Track of the Wolf (http://www.trackofthewolf.com/List/Item.aspx/129/1)

Cheers

Shanghai McCoy
November 16, 2013, 01:50 AM
I have an older Zoave and it shoots round balls well. A bit easier on the shoulder too...

tddavis26
November 16, 2013, 12:45 PM
thank you I will check them out.

tddavis26
November 16, 2013, 12:49 PM
how do I sight it in ? it has what appers to be a fixed flip up leaf sight with no windege adjustment on it. it has 3 levels of flip up leafs and they dont like to stay up. how do I fix this ? or is there a replacement sight system I can get for it ?

vagunmonkey
November 16, 2013, 04:28 PM
Windage is adjusted by moving the front sight or filling and recutting the leafs. The distance for each leaf depend on if someone has already "worked" the sights or not. I have mine set for 50 yards,100, and 200. If I recall correctly, the originals were 100, 300, and 500.

Sam1911
November 16, 2013, 04:47 PM
We had one that never did shoot any conical well. Shot patched round balls very nicely though.

EljaySL
November 17, 2013, 12:11 AM
Mine shoots Lee Improved .578s like a dream and .575s don't always hit paper. You might want to buy a selection of minis and roundball and see what the gun likes.

bonza
November 20, 2013, 01:18 AM
Actually you can squeeze quite a bit of windage out of MOST repro Zouave rear sights. If you lift up the tallest of the sight leaves you will see a screw head (most have two dimples rather than a slot), if you modify a screwdriver to fit these dimples you can loosen the screw. When loose the sight will pivot side to side on the screw & when retightened should hold at wherever you have it on the arc. I was able to do this with my Euroarms repro Zouave that I used for MLAIC competition & it saved my skin a number of times by not having to hold off to allow for wind. I also have a Zoli Zouave here that will also adjust, but my original Remington M.1863 rear sight always wants to return to center when the screw is retightened.:banghead:

zimmerstutzen
November 21, 2013, 08:28 AM
Minnie balls tend to be finicky for size to the bore, powder charge and lead.

Pure lead. Not 5% tin, pure. Keep the powder charge under 70 grains or the skirt will blow out at the muzzle.

In some guns a 577 over 50 grains works well, while a 578 over 50 grains is terrible.

I have never found a minnie and load my Zoli Zouave gave accuracy sufficient to keep them on the paper at 100 yds.

But the thing shoots 575 round balls over 60 grains like a dream. Keeps em under 3 inches off the bench at 100 yds. (even with the crappy sights)

I found that under 100 it shoots incredibly high. Like 8 inches at 50 yards.

Yes the gun was meant for minnies. But save yourself some grief and just shoot round balls. Just the expense I have heard trying different minnie designs and charges must exceed the price of the gun.

PapaG
November 26, 2013, 07:15 PM
Most have a round ball twist of about 1 in 72. Some shoot the old style minie well. None of the four I have owned did. All shot the 575494 semiwadcutter with light charges (50 gr). My best load, winning the 50 yard championship at Friendship and setting a new record in '70, I think (year), was 70 grains of fffg DuPont, .570 ball, pillow ticking patch with moose milk and a .070 20 ga wad between powder and bullet. Was a great hunting load and I even shot it in a few bench matches (using redfield aperture sights). This was with a Numrich NSSA approved 7 groove barrel and a Century Arms replica. I have an "original" first generation replica now, a Hy Hunter with "Remington" stamped on the lock plate, and the correct taper bored, choked barrel. Made in about 1964 and it shoots Minies very well.

sharps59
November 27, 2013, 01:11 PM
for good quality projectiles go to Ball-Accuracy.com

If you enjoyed reading about "zouave" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!