Value of winchester 9422 xtr


PDA






ch84
May 2, 2014, 08:51 PM
Have a chance to bid on one tomorrow its in good shape didn't get the serial number off it. Would really like to have it cause my dad has one in a 22 mag but don't what to pay to much either

If you enjoyed reading about "Value of winchester 9422 xtr" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
May 2, 2014, 08:58 PM
Probably $400 - $500 if in excellent condition.

But, by the time the XTR came along, the tooling was worn out, and Winchester was putting lipstick on a pig to sell them. Thus, the XTR models.

(At least compared to the fit, finish, and quality of the early Plain Jain blue & walnut ones.)

rc

ch84
May 2, 2014, 09:03 PM
Thanks rcmodel that's what I was thinking. Not sure if my dad's is a xtr or not but the gun would match up perfect with it

silicosys4
May 2, 2014, 10:50 PM
I'll second that, I just paid $550 this year for a first year 9422 with a little bluing wear, so I would think $400-$500 for a later xtr.
The 94/22's are a pretty sought after gun though, so you might be looking to pay more depending on where you are.

CraigC
May 2, 2014, 11:48 PM
I have two later model (mid-1990's) 94/22's and see no indication that they were built on worn out equipment. Or any difference between them and a friend's version from the 1970's.

I'd be very surprised if it didn't go up to $700-$800.

ch84
May 3, 2014, 12:10 AM
Hope I can come out of there with something good ranch dispersal sale just not over paying

Plastikosmd
May 3, 2014, 06:11 AM
Agee w Craig, 500 for a very clean gun is a steal and closer to 700 is where I am seeing them. Not sure on the tooling wear as my two xtrs are the nicest 22 levers I own. Maybe I am lucky. ( vs marlin and Henry)

Just got rid of the Henry and the marlins will go when I need cash for another gun

az_imuth
May 3, 2014, 06:44 AM
From what I've observed, the XTR models seem to be selling for a bit more than the standard models. While I have heard that the quality declined right at the end of production, the XTR's started in the late seventies while these rifles were still top-notch. I have an early 80's XTR that is every bit as good as my first year model from 1972. That being said, if I were in the market for a 9422 today, it would be an early model because I prefer the non-checkered stocks over the others.

jmr40
May 3, 2014, 07:03 AM
I have one bought many several years ago used. Mine is the XTR. Other than some character marks from use it is as well made as any gun I own. No idea what they are selling for today, but I'd gladly pay $500 for another just like mine if they were asking that much.

My 9422 XTR flanked by a pair of Marlin 39's from the 1950's and 60's. The Winchester outshoots both Marlins and is a lot smoother operating.



http://i1129.photobucket.com/albums/m513/jmr40/levers003_zpsd5b746e0.jpg (http://s1129.photobucket.com/user/jmr40/media/levers003_zpsd5b746e0.jpg.html)

huntsman
May 3, 2014, 11:28 AM
http://www.gunrunnerauctions.com/listings/details/index.cfm?itemnum=1081276348

$650. for 9422M XTR

Tommygunn
May 3, 2014, 11:37 AM
I have one bought many several years ago used. Mine is the XTR. Other than some character marks from use it is as well made as any gun I own. No idea what they are selling for today, but I'd gladly pay $500 for another just like mine if they were asking that much.

My 9422 XTR flanked by a pair of Marlin 39's from the 1950's and 60's. The Winchester outshoots both Marlins and is a lot smoother operating.



http://i1129.photobucket.com/albums/m513/jmr40/levers003_zpsd5b746e0.jpg (http://s1129.photobucket.com/user/jmr40/media/levers003_zpsd5b746e0.jpg.html)
JMR40;
I own a 9422 exactly like yours in the middle of those three leverguns. It's one of my favorite .22s; I bought it circa 1991.
Is the only difference between the XTR and the regular 9422 the checkering? When I bought mine, the only reason I got a checkered stock is the store didn't have a plain stock version, and the other rifle I was considering (a Browning if I remember right) was more $$ than I wanted to pay.

az_imuth
May 3, 2014, 01:56 PM
Not jmr40, but besides the checkering on the XTRs, the stocks had a glossy finish and the metal was supposed to have a higher level of polishing. The most notable areas of attention to the metal were the flat areas on the hammer and lever.

jmr40---that's a fine looking trio...especially the Winchester!

ch84
May 3, 2014, 03:49 PM
We'll the 9422 went for $800 I quit at five but was able to bring this one home 197974197974

ch84
May 3, 2014, 03:51 PM
63 Remington nylon shoots great so I'm happy

thriller
May 3, 2014, 04:24 PM
Lucky me, I just got an unfired one from 1986 gifted to me, free! Well its not unfired anymore, lol.

CZ223
May 4, 2014, 09:57 AM
I wish I still had my 9422M XTR.

loose noose
May 4, 2014, 06:43 PM
I've got two I bought brand new in around 1980, one is in 22LR and the other is in .22WMR both excellent rifles and I wouldn't even think about selling either one.

Armybrat
May 4, 2014, 07:37 PM
The fit & finish on my 9422XTR is equal to the three plain Jane 9422s that my brother has. And they are very nice & smooth little leverguns.

"Tooling worn out"? Hogwash.

http://i522.photobucket.com/albums/w349/ScoPro/MoreWinchesters027.jpg

If you enjoyed reading about "Value of winchester 9422 xtr" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!