[Berg01]

What Guns Would you Like to See Them Make?

Here's Mine;

Kimber Pro Carry HD in 9mm
Sig P226ST in 10mm
Smith & Wesson PC 952 in .38 Super
Glock Target Pistol in .22 LR

What's Yours?

[armoredman]

CZ97 in 10mm, 38 Super, and 357 SIG.
CZ75 Compact in 40SW.
A CETME that works right the first time.


After the ban, a rebuild of the Calico M900 in 30 carbine....
:cool:

[MrAcheson]

Take the camming barrel lockup and detent safety of a BHP and the trigger lockwork and barrel bushing of a 1911. Marry them together. Build one in 9mm with BHP ergos and one in .45/10mm with 1911 ergos.

[Ktulu]

Anything in .45 GAP - just kidding...

I'd like to see a 500 Magnum lever gun.


EDIT: Ooops, I didn't notice this was in the "Handguns" forum.

[artech]

I'd like to see a Kel Tec P-22 in 22 LR. With the Walther TPH's out of production, this might be a good seller, as there is nothing available right now to fill that niche.

What else...How about a S&W L-frame in .45 Colt, the return of the Browning B-92 in 357 magnum, or a new Mauser Broomhandle in modern calibers?

How about somebody making a carbine in 357 Sig? Especially a Beretta Storm? That'd be pretty cool. I'd also like to see a High Power in 357 Sig as well. Come to think of it, a P-7 in 357 would be uber-cool to boot!

[Dr.Rob]

Why would you want a barrel bushing on a BHP? The newer design is an improvement, I think.

I'd like to see an up-sized BHP in .45, with modern metals it's possible.

Still would like to see an Italian made DA Lightning in 38/357. Just for grins.

[skebe]

Seburo C-26A

http://boat.zero.ad.jp/foxtail/cg/koukaku/seburo_c_26a_z.jpg
http://boat.zero.ad.jp/foxtail/cg/koukaku/seburo_c_26a_z3.jpg
http://boat.zero.ad.jp/foxtail/cg/koukaku/seburo_c_26a_01.jpg

Yeah I know it's not real, but why let that stop us?

[Sean Smith]

I'd like Colt to make Government Models like they did around 1959, both in terms of looks and quality, only with easier-to-see sights and a fractionally shorter hammer for no hammer bite.

And consider this another vote for a 10mm CZ-97B.

[JamisJockey]

Assuming the AWB sunsets:
Big brother to the Taurus Millenium that shares magazines. 'full capacity' mags that will fit both, but allowing for the big one to use the Millenium's 10 rounders. Also, a carbine that uses said magazines.

[treeprof]

The SIG 245 with 1/2" more length in the grip so all 3 of my fingers will fit on it.

[charby]

Colt 1903 in 9mm or 40 S&W

Not sure if 40 S&W would work on the platform, but one can dream or drool about the dream.

Charby

[cidirkona]

Baby glocks with picatiny rails

glock carbine

Then again... a 40sw sub2000 would make a nice companion to the glock 27.... Will 27 mags fit in one of those, or just the 23s or whatever those are?

-Colin

[Langenator]

Kimber Pro Carry 10mm
Sig 220 10mm
HK USP 10mm

I sense a trend here...:cool:

[ddj8052]

Single stack Glock 23 and 27. I would easilly give up a couple rounds for something slimmer. AndAlthough this is the hand gun forum I would like to see a Ruger .45ACP Carbine that would use 1911 mags.

[jdege]

Personally, I want something with the firepower of Ma Deuce that I can carry IWB.

[cidirkona]

I'd like to get my hands on some of that blended alloy ammunition too...

-Colin

[Justin]

I'd like to see a modern handgun produced that is chambered for 7.62x25mm.

Methinks that a carbine chambered for the same round would just be the bees knees.

[ducktapehero]

I'd like to see a Schofield in 357 mag, or maybe 45acp with moonclips. Wouldn't mind seeing the Timberwolf pump 357 on the market again either.

[Chuck Jennings]

Ruger PC carbines in .45 acp and 10mm
Springfield armory XD45, XD10
Beretta Storm in 10mm


Pleeeeease!!!!!!! :D

[Stealthfixr]

Second the votes for 10mm versions of the CZ 97B and Sig P220ST! Sure buy guns for me.

[cidirkona]

How about...

Cheap 10mm ammo you can find in town...

-Colin

[pauli]

top of my wish list is an xd scaled down for .22, ala walther p22...

[12-34hom]

H&K USP - full sized - Variant # 1 - 10mm.

12-34hom.

[Marshall]

A true duplicate, reduced conceal carry size, actual to goodness real life BHP. Something RAMI size or a tad larger with XS Big Dot night sights and commando hammer.

[Zundfolge]

I want a Kahr K10

[sm]

Sean Smith wrote:I'd like Colt to make Government Models like they did around 1959, both in terms of looks and quality, only with easier-to-see sights and a fractionally shorter hammer for no hammer bite.
Agreed!!

I also would like to see the return of the Model 18 SW revolver , also made like it was in the "old days".

[Moparmike]

I second that cidirkona! I want 10mm in WWB!


Can they make a lever-action 10mm?:confused:

Phased plasma rifle in the 40w range...:evil:

[Jeff OTMG]

Scandium frame Walther PPK .380
Scandium frame Walther TPH .22
Scandium frame S&W Bodyguard in 9mm (349?)

[Dienekes]

Ruger Single Six as a 5 shot +P rated .38 Spl.; S&W M696 in 4" bbl., S&W 686 Mtn. Gun as a production item; M1950 S&W back in 4" bbl and stainless. M15 S&W 4" in Scandium.

In other words, some PRACTICAL guns.

[Majic]

Colt to make the Anaconda in 41mag and then bring back the King Cobra and chamber it in .41 Special.

[RatFink]

I'd like to see a modern handgun produced that is chambered for 7.62x25mm.

Methinks that a carbine chambered for the same round would just be the bees knees.

Ditto on the carbine in 7.62x25, if the Berreta Storm was made in that caliber I might buy one.

[Berg01]

I'm going to add a few to my list;

S&W should produce more of the classic-style polished blue revolvers, with the nice wood Magna Target grips, namely;

A Model 27 "Mountain Gun",
A 586 but with adjustable sights

[Traveler]

A NC manufactured sidelock O/U with the handleing of a Boss or Beretta SO for under $3k. (This is feasable).

[gbelleh]

I wish H&K would make a 9mm single stack pocket gun.

More guns in 10mm (USP, more 10mm 1911s)

[cratz2]

A single stack Kahr in 45GAP or 45ACP.

A single stack Glock in 45ACP with the slide length of the G19/G23.

CZ PCR or P01 in 40S&W (which I hear might be coming later this year).

A High Power with a decent finish that had less than a 10 lb trigger pull that didn't cost appreciably more than a CZ75.

[Third_Rail]

A .308 autoloading pistol. I'm crazy, I know. :D

Simple design, no slide, basically a hugely cut-down FAL action, lightened and made with stronger alloys, and a folding front grip. I'd be the first in line.....

EDIT: Better yet, a 5 or 6 shot (4 would even work) revolver in rifle calibers, IE .223, .308, 7.62x39mm... I'd love that.


I know, nutty handcannoneer. What can I say, I love recoil!

[W Turner]

More 10mm's across the board
High Point carbine in .45acp that accepts 1911 mags
Romanian AK's without canted front sights
More blued S&W revos without the lock
Colt Delta Elite and Mustang Pocketlite
Alloy framed NAA Guardian in .380
EAA Coach gun with exposed hammers
Accurate Mini-14's with real magazines
Springfield Armory M1a's price at their real worth
Glock 19-size in .45 GAP
K-frame 5-shot titanium cylindered revo in .45GAP
More 9mm revolvers
Factory produced carry revo in .480 Ruger


A guy can dream I guess....

Mino

[Chuck Jennings]

More blued revolvers!!! They have a soul. :D

[Mac Attack]

A alloy, high capacity HK P7 chambered in .45 ACP! I love my P7M8 but would love it even more if it was a .45 and didn't weigh so much.

Mac

[Mikul]

A CZ or H&K chambered in 10mm.
I don't buy many guns (I know that heresey around here), but I would buy one of these TODAY.

The Storm in 7.62x25 would be cool. If it comes in a folding stock version after the ban, it would be dead sexy.

[Evil_Ed]

I would like to see a reproduction of the 1858 Remington New Model Army and the LeMat revolver made with high quality modern carbon steel (basically I want it strong enough to handle modern powder pressures and/or frequent shooting with out wearing down quickly as most of the current reproductions do).

How about a high tech pocket pistol close in size to the Kel-Tec P3AT that is chambered in 45acp?

Oh, and I want Rossi to start making coachguns again.

[MrAcheson]

Why would you want a barrel bushing on a BHP? The newer design is an improvement, I think.

I want a removeable bushing so it can be more easily accurized. The BHP is not known for accuracy.

[Vern Humphrey]

Colt New Service in .45 Colt, with adjustable sights.

[AlienSoul]

G99 == G22 but in 9mm and uses P99 mags
I have been dreaming about this gun that doesn't exist all week. If anyone from Walther sees this PLEASE make one. I will pre-order and everything.

[raz-0]

out me on the list for a cz-97b in 10mm. I'd really love one of those.

[AnklePocket]

Sig P232 in 9mm

[Parker Dean]

Colt New Service in .45 Colt, with adjustable sights.


Ditto

[krept]

- full size version of the Glock 36

- P7 in .45 ACP

- airweight snubbie .45 ACP revolver with concealed hammer and low profile sights

- single stack full size USP .45 and 10mm with a lower bore axis, good trigger and manual safety located like a 1911 (allowing for high thumbs grip)

- single stack subcompact Glock in .45 or 10mm

[Protector]

I am amazed that no one has mentioned a modern, double action top-break big bore revolver! There is nothing quite so cool - historical - intriguing and practical all at once. Something in stainless .45 LC OR .44 special or maybe (drool) a .50!

[Dark Tranquility]

Beretta:

That CX4 Storm in .22lr
Model 87 Cheetah (.22lr) in stainless
Model 950 (.22) short in stainless

Glock or H&K:

A top quality, tactile pistol in .22lr

Dan

[Dark Tranquility]

Olympic Arms: Whitney Pistol .22lr

[41mag]

I would pay good money for a new Automag.I'd of course want it with both barrels (357am & 44am).i'd love it & hold it & squeeze it & ..... errrrrrr.:D

[stv]

Sigarms double stack 10mm 226 or similar
Colt 10mm 1911
An HK M4 for the civvie market
Blued Smiths
Colt D-frame revolvers
10mm Beretta Storm

[FRIENDLY]

I would like to see the remaking of the Colt/Browning 1903/1908 pistols modified to easier use modern hollowpoint ammunition reliably

[gbran]

Seems like a bunch of 10 mm requsts. Me too. More 10's in more platforms. I specifically want a compact ccw size 1911 in 10mm and a 6" longslide in 10mm.

[WarMachine]

An inexpensive, quality 1911 that is NOT an A1 :cuss:

[John G]

Bring back the Browning Auto-5, in 20, 12, and Sweet Sixteen!

[pauli]

good point, gbran. i'll add another one: ruger mark II in 10mm. if it could be pulled off, it'd be a riot at the range :D

[Marshall]

I'll second majic's quest of Colt's King Cobra! The high bright polished stainless steel in 357 and 41 Mag.

[10mmman]

Just kidding.

Ti 610+ Mountain Gun. w/ Second steel 6 shot cylinder (fluted) and hand for IDPA.

[JShirley]

5-shot L frame .41...or a Taurus .41 without the damn porting.
I'd like a 10mm L frame, too- 5 round is fine.

I'd also like a single-stack, full-size Glock in 10mm.

I've also wanted a P-32 based .22 magnum for a while- perhaps with longer slide and adjustable sights.

A .308 autoloading pistol....basically a hugely cut-down FAL action, lightened and made with stronger alloys, and a folding front grip. .

This would be an AOW, not a pistol. Sounds cool, though.

John

[Third_Rail]

Fine, then a .308 autoloading AOW. :D

[one45auto]

Personally, I'd like to see Ruger bring back both the Police Service-Six and the Security-Six. I'd also be tickled pink if Colt revived their Police Positive Mark V and Detective Special models. However I'm not going to hold my breath. :rolleyes:

[LynnMassGuy]

A Massachusetts compliant 1911 under $500.:banghead:

[SapperLeader]

XD45, XD10, and a titanium frame browning hipower 9mm.

[gyp_c2]

Government models including NM from the late 20s and 30s...
http://www.stopstart.fsnet.co.uk/smilie/smokin.gif

...preferably offered at a reasonable price...

[CarbineKid]

A ruger MK II pistol that fires 9mm, and is easier to strip. Is it me or are all the new guns coming out just polymer....anyways back to the topic. I'de also like to see some of the older guns come back into production...like a P-38 a S&W model 39 or a Springfield 1903:)

[The Swampfox]

I believe the "perfect" CCW gun would be the Kimber Ultra-Carry with a "light double-action" trigger like Para-Ordnance makes.

[Headless Thompson Gunner]

I was just musing the other day about the ideal backpacking gun. Take the frame off one of the really lightweight 5-shot snubbie .357 revovlers, and attach a worthwhile barrel, say 6 or 8 inches long.

The resulting handgun would be light enough to pack into the mountains without strain. It would be robust like only a revolver can be. Loaded with hot magum loads it could drop nearly any dangerous or tasty beast; with good .38 hollow points it can handle human aggression capably. The long barrel means a long sight radius which, coupled with a good single action trigger pull, would help you shoot it accurately at the longer distances encountered outdoors. All this, and did I mention it would be light enough to pack up a the side of a mountain?

The more I think about it, the more I want one. Anyone know how much it would cost to rebarrel a S&W Scandium revovler?

[Mgraff]

1959 Quality Controlled.... Colt 1911s!!!!!! Best idea I've heard.

How about....
Ruger Redhawk .44s in 3 or 4" stainless
Marlin Guide gun in .50 S&W Stainless with synth. stocks, I need a new bear gun!!!

Graff

[BluesBear]

...or a Taurus .41 without the damn porting. Amen Brother!

I'd buy one in a New York Minute!

[Zach S]

A GM BUL M5 with a light rail that uses out-of-the-wrapper Para Mags. And of course another M5 thats P13-sized (I'd buy one in a heartbeat), and of course, it would have to use P13 mags.

Para CCW with Companion hammer, grip and thumbsafeties.

Colt CCO (I think thats what they called them? OM frame, commander slide), without the series 80 safety.

Full-size 2nd gen Glocks with a rail. Oh yeah, new, not refurbished, 2nd gen glocks.

One more thing, I'd like to see someling like the .45 AMT backup, higher quality of course.

Though its not a gun, I'd like to see Tripp's start hardchroming again.

[ThreadKiller]

A Sig .22 the same size and shape as their 220 with the same operator controls.

Tim

[1911Tuner]

A Smith & Wesson L-frame, fixed sight, round butt, 5-shot revolver
in .41 Magnum caliber. And another one with a 4-inch barrel with a
square butt. No scanduim please.

Also like to see'em go back to the hammer-mounted firing pin and
case-hardened steel (Not processed near-steel) lockwork. Don't
suppose it will do me any good to hold my breath until they do it, though..

A choice of Series 80 safety or NOT on Colt 1911s and Commanders.

Cheers!

Tuner

[cidirkona]

ARs, SU-16s or sub2000s in 10mm

Does anyone already make a 10mm AR? -- wouldn't suprise me... not that I could afford it... Anyone know how hard it would be to convert a 40sw sub2000 to 10mm? Machining the barrel doesn't seem like it would be too hard... but the extra long cartiage wouldn't fit in the .40 magazines...

-Colin

[4v50 Gary]

Investment casted Mauser C96 in 45 ACP by Sturm Ruger. Of course it'd have a shoulder stock holster

[Jim PHL]

Snubby .45ACP revolver that doesn't require moon clips

[ducktapehero]

I've already posted once but I thought I would post again. I'd like to see a Mech-Tech carbine conversion for the CZ-52. I'm sure that the 7.62x25 would get REAL interesting out of a 16" barrel.

[1911Tuner]

I'd like to see a light (5 pounds) bolt-action carbine based on the Mauser action designed for the length of the 7.62x39 round. 16-inch barrel and a stock with the length of pull identical to the Ruger M-77 ultrashort, UltraLight model.

Talk about a neat little package!:cool:

Tuner

[Richardson]

Winchester Model 70 .308, Classic Compact in stainless & synthetic.

[Majic]

I would like to see more rifles in .22 Hornet. A fun, quieter little round for when you don't need to reach out across the large fields. Bring back the Low Wall with a pistol grip stock would be great.

[ducktapehero]

I like 1911Tuner's carbine idea. Especially if you could load it with the 10 round stripper clips. I'd buy that rifle today.

[Berg01]

I'm adding another one;

a current production Colt Gold Cup NM BUILT PROPERLY WITH A SERIES 70 FIRING SYSTEM!

[Jeff Timm]

An eight shot Ruger SP-101 .22 with interchangeable cylinders for .22 LR and .22 Magnum, and choice of barrel lengths between 2" and 6" Adjustable and fixed sights.

A five shot Ruger SP-101 in .357 with choice of barrel lengths between 2" and 6".

An HK-5 with interchangeable barrels in .22LR, .32 ACP, .380 ACP and 9x18 Mak.

A Ruger GP-100 with a 5" barrel.

An AR-180 in 10mm.

Bring back the Sako Fincub, short, bolt action carbine in 7.62x39mm, with synthetic stock and a long eye relief scope.

Geoff
Who could probibly think of a few more.

[1911Tuner]

ducktapehero said:

Especially if you could load it with the 10 round stripper clips.

Yeah! And maybe a detachable 5 and 10 round box magazine like the
British SMLE! Buy one? I'd buy two!:cool:

[Oboeman]

I would like to see a S&W 500 chambered for .223. It might not take the pressure, but the cylinder looks long enough, and you could probably bore it for at least eight rounds, and maybe ten. Now that would be a hunting pistol!

[charleym3]

... Ruger GP100 in 9mm 3 & 4 inch barrels.
... Ruger GP100 3 inch models with adjustable sights.
... Ruger Redhawk in .45ACP with 3 and 4 inch barrels.
Love those moon clips wheel guns.

[Third_Rail]

I would like to see a S&W 500 chambered for .223. It might not take the pressure, but the cylinder looks long enough, and you could probably bore it for at least eight rounds, and maybe ten. Now that would be a hunting pistol!

That would be wonderful! I wonder who would do a job like that though? :confused:

[Hellion Productions]

I'd like a 8+ shot .357 Magnum done on the X-Frame, 7 1/2" barrel. I know N-Frames can hold 8. Wonder if X-Frames can hold more?

An OD Green finished 686 Hunter, like the 629 Hunter, with a Medusa-type cylinder.

I'd also like a .22 conversion kit for the Sig 220.

XD-45

And a Mateba in titanium or stainless. Also Hogue grips for the Mateba.


Best,
John Bear Ross

[Motor-T]

A 10mm P220 and P220ST. With and without rails (I don't like 'em but many do)

[Brian Williams]

Hey Tuner check this out......
http://www.charlesdaly.com/images/firearms/rifles/actions/large/MiniMauserBarreledActionBlue.jpg http://www.charlesdaly.com/images/firearms/rifles/Actions/BarreledMiniBlueC2R2.gif http://www.charlesdaly.com/images/firearms/rifles/Field/large/SuperiorGradeMiniMauser.jpg http://www.charlesdaly.com/images/firearms/rifles/Superior/Mini/MiniMauserC2R2.gifsorry thie pics are so big but E-gunparts will have the actions in in may.....

[1911Tuner]

Okay Perfessr...Where'd ya get it and where can I get one???

Oh my poor, poor Visa...tsk tsk tsk.

[klover]

ditto on handguns in 10mm, .223, and 7.62x39.
So what's a little recoil?:evil:

[HadEmAll]

For some reason I've always thought a Ruger Mini-.243 would be the perfect carbine.

[Vimes]

I'd like to have a Mech-Tech carbine conversion unit for my H&K USP.

[Bergeron]

I'd like to see an all steel double stack 1911 with the full length extra heavy dustcover of the Baer HeavyWeight Monolith. They don't even have to manufacture the whole gun, just the frame.

In my dream world, this pistol would be able to take both the S+A mag well in addition to the S_I series pistols and would be offered by SVI.

If that's not possible, or just not challenging enough, the same gun with a Caspian-style Recon Rail would also be very nice.

[thefitzvh]

I'd like to see some kind of 9mm and 40S&W carbine that took springfield XD mags.

Or a mechtech for the XD...

I'd also like to see a new manufactured mosin chambered in something modern, like 308, or even something bigger.


James

[Richardson]

and heavy to CCW, hmm? it's just a toy. Ditto those with no concern for speed of repeat hitting. If all you want is a toy, why not stick to playing tiddlywinks? then we wont mistakenly count you as a "progun" voter.

Wella,

I heard you were over here..... but it looks like you're up to your old ways, picking fights for no good reason....

But regarding this "toy"... You bring the tiddlywinks when you break in to my home, and I'll bring my "toy".... and we'll have a shooting contest...


Richardson

[1911Tuner]

:scrutiny:

[andrew17]

Owning several of their rimfires, and having handled and shot their centerfire pistols, I like to see CZ make a 1911 .

I'd bet dollars to pesos they'd do it right. heavy on the Forged with a dash of spring steel extractor for good measure hold the mim-ayo & plastic. And a side order of in-spec mags to go please. Wait...make that two. :D

[KadicDeshi]

What I'd kind of like to see is CZ bringing back the 40B with the possibility of an additional chambering in (I know I'm gonna regret saying this) 45 GAP. Now before I get jumped on :p the 40B seems to fit my hand better than even a GM 1911 as the handle extends almost the whole width of my palm. And I just can't help but think that a 45 of any kind can't be a bad thing.

Barrett

[Ascot500]

Ruger Bearcat in .32 Magnum with 5 shot cylinder.

Reproduction Bergman-Bayard in 9mm.

AR-15 uppers in .22 magnum and .17 HMR.

[Griff]

Another bring back the Colt M1908 .380
Another modern LeMat
Another Top-Break Bulldog

and how about a P3AT in .32NAA or P32 in .25NAA?

[Dave Markowitz]

Ruger Mini-14 with a decent factory barrel.
Ruger PC45
High Point .45 ACP carbine
Mauser C96 that I could afford
Left-handed No.4 Mk.I (It'll never happen. :( )
Left-handed 1874 Sharps (ditto)