ruger 10/22 new EDM match extractor


PDA






ronald passardi
May 15, 2004, 10:38 AM
replaced my extractor on my 10/22 with a new match extractor.when tring to cycle the bolt by hand it only ejected the first round the rest would just jam during the feed.i have not tried to fire the gun yet maybe it was made like this and will fire fine but i have my doubts.has anyone had any experience with this problem

If you enjoyed reading about "ruger 10/22 new EDM match extractor" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
submin
May 17, 2004, 02:53 PM
Are you saying that the first round will extract and eject but the next round won't enter the chamber? If so, being push feed, I don't think the extractor has anything to do with feeding the next round. Are you pulling the bolt back and letting go, letting the bolt slam forward on its own? If you try to ease the bolt forward with your hand it will jam every time. Just pull it back and let go. See if that helps.

Have you done anything to your magazine? Like cleaning? They have to be reassembled correctly or headachs will follow. Is the magazine seated fully? Are you using BX-1 Magazines?

ronald passardi
May 18, 2004, 03:10 PM
mags are all spotless and an extra 1/2 turn put in i don't believe the mags are the problem.I got a chance to fire a few rounds this weekend and i don't know how but the gun seemed to work i had a couple of missfires but that could be the cheap ammo.it seems that the gun works better when it cycles itself and not by hand i wll keep you all posted thanks for your helpRON

submin
May 18, 2004, 10:29 PM
After adjusting your magazine, did you back the allen screw out 1/8th turn? If you don't back it out the mag will act as if you didn't tension the spring enough. The rotor will bind between the front of the mag and the six sided nut. Some back the allen screw out until it clicks (1/8th-1 turn). You can try it and see if it feeds better than 1/8th turn and go from there.

Read this. http://www.gunsmoke.com/scot/guns/1022/mags.html

Turn the six sided nut eight flats, shoot 20 rounds and add two more flats (total of ten). Back the screw out until it clicks. Have fun.

If you enjoyed reading about "ruger 10/22 new EDM match extractor" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!