Search results for query: *

TALIV nailed it. IMR 4451 is nearly identical to the varied 4350s, is temp stable, copper resistant and runs minimal ES. Tried it in bench rifle and it stayed well under 1/2 MOA at 600yd for 20 shots. ITS available.!

Yes many thanks, that was a tremendous amount of work.

Just had another thought, there is some polymer ammo available now- that should really drop the weight load.

Current 9mm Blazer is boxer primed and will reload with no changes in technique. Ive tried a few cases a many as 3 times without any issues. But there seems to be little point to it. Now if yer planning a trip to Mars then a tad of weight might become significant. On my bench a boxer...

My barn gun 308 shoots this very well with 165gr bullets. In fact outstanding. With the little gun it shoots well but I think Varget and 4895 are somewhat better at least in my guns.

Started reloading somewhere around 1958 using a 310 tong tool. The primers came in wooden slotted trays like those shown, but I cant remember ever seeing domed primers for reloading. I wonder if the retail sports stores were biased against them. None of the presses I acquired over time-CH and...

First if anyone needs to get rid of their "Perfecta" brass you can mail it to me, PPU als. I will take care of it. Secondly one of the simplest means of lubing a large # of cases with no powder contamination or stuck cases, is to use Lee case lube with a few cleaning patches and some 91%...

It is simply that smokeless powder is a flamable solid that is really difficult to ignite, almost impossible by percussion, and it is packaged and has been packaged in containers that are reasonably resistant to ignition. Primers have been packaged forever in a manner that has been resistant to...

Regrets that I didnt get enough 8#s of powder when they were only 80$ a few years ago.

Ill second the "Ll Dandy." Its limits alot of loads, but when you establish one you just put in that rotor and go. Its quicker than a tax and spend politician. ablock of 50 pistol cases should only take bout 120 seconds. Put the same rotor back another day and you have the same charge. Rotors...

First, dont ever consider firing a charge behind a stuck bullet in any form. Ever!. Secondly is the wood dowel still in the bore? It cant stay in their while you try to push the bullet back, nothing but misery that way. If no wood inplace then listen to the people that said use a bore fitting...

First, Hazmat is a cashcow tax invented by someone in the shipping business with the aid of some politico. I do not believe there is a single recorded incident of a powder or primer ignition at the hands of a shipper under normal conditions, forever. Not discounting extremely violent crashes or...

I think I heard " I gave it several whacks, then finally a rally solid whack" several times. Why cant the pellet fracture then when the bits rub together off the little bugger goes. Its unlikely for any of these to blow up, but a crimped pistol primer might prove me wrong. The damage would be...

That's OK

Ive been loading a couple of WSMs, 7mm &300 and a 375 Ruger, with unsized cast bullets that are Lee tumble lubed. Im not using TB but the same principles apply. I dont size the cases at , just use finger pressure to seat. Some are tighter than others-the 375 will seat firmly and can be run thru...

I think the Russian primers have dried up. But the good news is all the other brands seem to be returning to the market place. I just got some RWS/RUAG sr primers, I know, I know, but sometimes you just try to shrink groups and a primer might do it. Also got a bunch of CCI primers.

Varget and H4895 cross all the lines fairly well. They are also "extreme" powders that claim to be less temp sensitive. That being said 2 separate canisters , as stated dont cost any more or less. Trying to find a compromise usually means you have a compromise that does everything "sorta" OK...

I shoot them right out of the mold with tumble lube and in the 1/2 dozen guns, long an short, I have no trouble. I have shot some combinations that coat the barrel every shot. If you really want to learn about leading just get some of the original style factory 357 magnun full bore lead bullets...

The 13+gr of Unique w/225 can be found published,BUT ONLY in the stouter guns not the SAA or its clones. The S&W will not blowup but it will loosen all its joints.

I use a Lee 255gr SWC with 10.0 gr Unique. Ths is in a S&W 25-2 and a Redhawk. Verypleasant and very accurate. For serious work I use Hornady 250 and 300 gr bullets in Starline cases . I use the Hodgdon data to load these to full power. 23.0gr with the 300 gr and 25.7 gr with the 250 gr. The...