Search results for query: *

  1. MSR_Gal

    Reloder 16

    Metering: Reloder 16/17 vs H4350? "Brazos_Jack, I expect it will charge similar to Reloder 17, as the granulation is closer to that than H4350." I'm not familiar with Reloder 17 either. How does it meter compared to H4350?
  2. MSR_Gal

    Reloder 16

    Paul, How does Reloder 16 meter compared to H4350?
  3. MSR_Gal

    .338 winchester magnum

    This and a .270 is all anyone needs A .338 for all NA game over 350lbs and a .270 for everything less. That is the perfect NA combo. It would also do for all African plains game except Giraffe. Some would stretch it to Giraffe and even Cape Buffalo if legal. But I'm a conservative "use...
  4. MSR_Gal

    Sarsilmaz Hancer branded pistol - good buy?

    These look interesting. I have a few questions about both these Sarsilmaz Hancers and the Armalite AR-24 - 9mm only: Can either, or both, use CZ-75 magazines? I don't see a cross pin hole for the firing pin retaining roll pin of the CZ-75B. Do these use a 1911 style firing pin retaining...
  5. MSR_Gal

    Vietnam Tunnel Pistol.

    I remember seeing pictures of tunnel rats in Nam back in the late 60's and early 70's. I think it was an American Rifleman article. They were carrying .38 Spcl S&W's with silencers. IIRC the article stated that the silencers weren't too effective due to the revolver's cylinder/barrel gap, but...
  6. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    So Metalform mags with rounded followers are the best 9mm 1911 mags. Any others "as good"? Or are Metalform head and shoulders above the others in 9mm?
  7. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    Thanks Joe, I am planning to ask RRA to not use the red Loctite 271. But if they won't devite from their SOP, I'll try the soldering iron on the screw heads before I try putting the whole slide in the oven. Anybody have a gun with Black T finish? What exactly is it and is it worth the...
  8. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    I think I'm going to order a RRA Bullseye Wadcutter in 9mm and standard (5" barrel) length with the Bo-Mar Sight rib and then order the RRA scope mounting rib with it. Is ordering it in Black T finish worth the extra $$$? Only problem is that RRA uses red Loctite 271 on the rib mounting...
  9. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    Anybody here done business with Bud's? I googled them to try to find a phone number. I ran accross a compaint instead. I know anyone can end up with a complaint or 2. Anyone got good things to say about Bud's? Any sources for S&W 952's at similar pricing closer to Houston?
  10. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    The RRA Limited Police Competition 9mm (either 5" or 6" bbl) is $2355 in the 2006 catalog I've got. If the SA and STI are <$1500, that is a lot of practice ammo. Are the RRA, Brown, Wilson, etc. that much more accurate and higher overall quality? If so, buy quality and you only cry once. Or are...
  11. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    Some of the RR's "look like" what I'm after. I just don't know anything about their quality or customer service. The only 1911 I have ever had is my Mk IV Series 70 Gov't Model I've had since 1977. Don't know about STI either. I'm sure Bob Marvel could fix me up, but I was hoping I could...
  12. MSR_Gal

    Glock "C" Option...?

    I don't think I'd ever want a comp'd carry gun due to the chance of the flash causing problems at night. But my favorite centerfire "range queen" is a Glock 17L with a Lone Wolf comp'd barrel. The comp'd barrel makes the 9mm a really mild, enjoyable toy.
  13. MSR_Gal

    9mm 1911 Off The Shelf Tack Driver Wanted

    I’d like to get a 9mm 1911. This will be strictly a range queen. Not for carry. Like a 9mm Gold Cup, if such existed. I’m looking for great mechanical accuracy (approx. 1” @ 50 yds from ransom rest with match jacketed ammo?), great trigger & adjustable target sights, and low recoil/muzzle...
  14. MSR_Gal

    Advantage Arms Conversion Kit Experiences

    Looking for a Target Model Advantage Arms Glock Conversion Kit Since the Target model AA kits proved unpopular, I'll do a couple of list members a favor and buy their AA Target Model 17-22 or 19-23. If you have either a 17-22 or 19-23 Advantage Arms Target Model that you would like to sell...
  15. MSR_Gal

    Spotting Scope for Pistol Bullseye

    I’m planning to get a Gun-Ho/Gil Hebard 4 gun range box. gun-hoguncases.com/ I want to get a scope to mount in it like the bullseye shooters use. Anybody here shoot bullseye or know what spotting scope is most popular with the bullseye crowd these days? I’ll be using it mainly to...
  16. MSR_Gal

    Advantage Arms Conversion Kit Experiences

    Just an FYI, I just called Advantage Arms to order a 17-22 Target. The Target model Glock Conversions have been permanently dropped from production. So I ordered a 17-22 LE instead. Theoretically, the lighter slide of the Target model should have made it less ammo sensitive. But...
  17. MSR_Gal

    Pic Request – Marvel 1911 Conversion Unit 1

    Rangegod, I like that grip safety. What is it? Will that grip safety fit an unmodified Gov't model frame, or did the rear of the frame have to be modified?
  18. MSR_Gal

    Pic Request – Marvel 1911 Conversion Unit 1

    Nice looking rig. That's just what I'm looking for. I'll have to give Midway a call. Do you know if they have the kit with both sight rails?
  19. MSR_Gal

    Pic Request – Marvel 1911 Conversion Unit 1

    I’m planning to order a Marvel Conversion Unit 1 to go on my well used Colt series 70 in the near future. I’d like to see pictures of your 1911’s with your Marvel Unit 1’s installed. Anyone know the current wait time between order and delivery for these?
  20. MSR_Gal

    22lr kit for glock 19?

    Thanks Mljdeckard, That's the info I needed
Back
Top