1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

10mm and wsf/titegroup

Discussion in 'Handloading and Reloading' started by area51, Nov 23, 2013.

  1. area51

    area51 Well-Known Member

    I've loaded 175 cast swc for my Govt model 1911 using 5.5 w231 and 12.4 #9 with good results.
    Anyone here used TG and WSF ? Would be curios to see what feedback you guys can give me.
  2. sexybeast

    sexybeast Well-Known Member

    Yes and no. I've used titegroup with lighter lead bullets. I just add a half grain more than my 40 load. Gun functions fine but they are light.
    As long as you are not looking for max velocity [which you should not be with lead in the first place] it will work fine.
    I would start with 4.5gr of titegroup and move up if the slide won't lock back after the last round.

Share This Page