1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.


Discussion in 'Shotguns' started by 2nd Amendment, Jan 12, 2003.

  1. 2nd Amendment

    2nd Amendment member

    Went to order a new 590 and told them I'd love to find what they once called the 590A2. When it first came out there were dealers trying to tell you only police could buy it and I had a 590 anyway so I just let it go. Well now I figure I'll find out if it can be bought or not.

    Apparently no, they now call it the DA. Heavier barrel, steel trigger guard, etc. Question is, I went ahead and had them order Ghost Rings and heat sheild for it wondering the entire time if they'll fit. The barrel obviously has to have a larger exterior diameter. Anyone ever put ghost Rings and sheild on one of these? Or am I the only loon willing to pay an extra hundred bucks for a little more metal and thus on my own? Oh, do these still have the bayonet lug and if so, does the bayo actually fit?
  2. Marshall

    Marshall Well-Known Member

    Check out this:

    Mossy 590DA's

    Read this quote:

    Ghost Ring Sights Only
    A Model 500/590 Conversion Kit includes the Rear Sight and Front Sight and Base for non-ribbed barrels (gunsmithing required)

    Ghost Ring Sight 500® and 590® Rear and Front Sights only
    Item # 95300...$62.

    Ventilated Heat Shields*
    This practical accessory can really dress up any plain barreled (without vent rib) Mossberg® shotgun. Choose Blued, Parkerized or Marinecote® with mounting instructions. Fits standard 500® and 590® 12 Ga. models only.

    * (Note: will not fit 835, 590"A1" series or Ghost Ring Sight models)

    Mossy Accessories
  3. Andrew Wyatt

    Andrew Wyatt Well-Known Member

    The DA is the worlds first Double action Only shotgun.

    as such it has a bleeding horrible trigger. you'd be better off with a standard 590 or a 500.
  4. Duke of Lawnchair

    Duke of Lawnchair Well-Known Member

    The Mossberg 590DA looks like an interesting animal, but I don't think I'd pet it...
  5. Dave McCracken

    Dave McCracken Moderator In Memoriam

    The 590's a good fighting shotgun. Darn near as good as an 870, in fact.

    However, the heavy, nasty trigger on the DA is moving in the wrong direction.

    Get a standard Mossie, make sure the trigger runs less than 4 lbs, and use up ammo until you're deadly to the right people. Training and expertise beat the heck out of gadgets...
  6. 2nd Amendment

    2nd Amendment member

    The damn DA trigger isn't what I wanted. The heavy barrel and steel trigger guard are. Seems that you can't have those without the other now which I didn't realize until doing some closer reading. Looks like I'll have to call the shop today and change that order.

    Thx guys.
  7. Ledbetter

    Ledbetter Well-Known Member

    Re: Heat Shield

    The only time my heavy-barrelled 590A1 gets hot is when I shoot a round of trap as a single. That's 25 shots (a boxful, one right after another) about one every 10 or 15 seconds.

    Rethink the need for another two pounds of metal and about 8 snag points. Or buy mine, cheap.
  8. 2nd Amendment

    2nd Amendment member

    Changed the order to a regular 590 with the 18.5" barrel. Figure I'll try something different one way or another. OTOH, Ledbatter, if ya wanna sell the whole Mossy and not just the ehat shield... :D
  9. Route 66

    Route 66 Well-Known Member

    2nd Amendment

    I'm have been looking to get a 590 for HD. So tell me what you finally ended up ordering. You got the 18.5" barrel, what about sights, shield, speedstock, etc.?

    Route 66
  10. 2nd Amendment

    2nd Amendment member

    The shop(Switz City Guns) is supposed to let me know here in a day or so what they've found out. John is going to try and get me the short one with the GR sites and sheild and a regular stock. I always stick an ATI folder on my 590's cause it seems like the best of both worlds to me.

    For some reason the catalog they had didn't list the A1 but the Mossy website does. I just haven't had time see what's up with that.
  11. Route 66

    Route 66 Well-Known Member

    2nd Amendment

    I was looking to get a 590 with regular stock, 20" barrel, 9 shot extension, Ghost Sights and shield. However I believe their website says that you cannot get the shield if you get Ghost Sights. I don't quite understsand that since it appears that the sheild would not interfere with the sights. I'd like to know what you finally get because I'm at the point of heading to my gun shop soon.

    Route 66
  12. 2nd Amendment

    2nd Amendment member

    I'll tell you what is simplest, which is what I did on my last two. get the 20" with the heat shield, order a set of Ghosts and have your smith slap 'em on. Both I got previously were in-stock items and so I had to play DIY. I'm beginning to think it would have just been easier to do it that way this time since it seems Mossberg itself isn't quite sure what they will and won't put together.

    Anyway, I should know by the end of the week what I'm getting in to.
  13. Route 66

    Route 66 Well-Known Member

    I'm planning to go to the Indy 1500 show this weekend. I hope to find a dealer there and maybe get a hands on with a Mossy 590 and hopefully understand better how the shield and ghost sights work together.
  14. Moondancer

    Moondancer Well-Known Member

    So What Have I Got?

    I bought a Mossberg 590 used about 5 years ago. It has the identical appearance of the 590DA shown on the link EXCEPT it doesn't have the DA trigger. Would this be the 590A2 that 2nd Amendment wanted???
  15. 2nd Amendment

    2nd Amendment member

    OK, that was a mistake of mine. It's a 590A1, not A2; heavy barrel, steel(aluminum?) trigger guard, etc. That's the one I want, it shows on the Mossy website, but it doesn't show up in the shop catalogs. I am assuming at this point it's been decided to make it an LEO only item. If yours has the heavy barrel and such then it's an A1.
  16. Ewok

    Ewok Well-Known Member

    Hans Vang - http://www.vangcomp.com - sells the 590A1 and 590A1 Marine Magnum, with his modifications.

    Also, if you're having trouble getting dealers to admit the existance of the 590A1, it may help to use the exact catalog number. The 590A1 model numbers start with 51, the DA starts with 53, and the non-A1 590 starts with 50. I have the 18.5" GRS (Ghost Ring) Bantam, which is 51520. With the regular stock, it'd be 51517.
  17. Ledbetter

    Ledbetter Well-Known Member

    Mine (plain 590A1, 20" barrel, eight+1 mag, no ghost rings) is number 51660.
  18. Gewehr98

    Gewehr98 Well-Known Member

    Ledbetter, how can a heat shield weigh 2 pounds?

    That's more dense than stamped steel or nylon if it weighs that much. Mine weighs less than a pound, and it's steel. :confused:

    A Double Action trigger on a shotgun?! That's just plain wrong. Even if the liability lawyers did have a hand in it. :scrutiny:
  19. Ledbetter

    Ledbetter Well-Known Member


    It weighs two pounds because I am exaggerating.:neener:

    Still for sale, cheap.

    And a DA trigger on a shotgun is pretty incomprehensible.
  20. KLR

    KLR Well-Known Member

    DAO isn't necessarily incomprehensible on a shotgun. Many agencies (mine included) only break out the shotguns twice a year for qualification. We carry DAO autos. I would feel better knowing my fellow LEOs (who aren't gun people) are carrying something closer to our duty weapons (read- without such a short trigger pull). I would like us to go to the 590DA but no one listens to me. Heck, I would like to see our MP-5s replaced with FN P-90s :D

Share This Page