1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AK safety lever

Discussion in 'Rifle Country' started by son of a gun, Nov 9, 2003.

  1. son of a gun

    son of a gun member

    I saw this on another website what do you think about ?

    Last edited: Nov 9, 2003
  2. DMK

    DMK Well-Known Member

    I like it. Even a manual hold open would be handy to allow the barrel to cool or show clear at the range.

    While you're at it though, soften up the edges a bit. Most of the one's I've seen on AKs are darn sharp.
  3. OEF_VET

    OEF_VET Well-Known Member

    I'm down for one with the notch. Let us know when they're ready for shipping.
  4. Dr.Rob

    Dr.Rob Moderator Staff Member

    I'd buy one if it fits my Norinco in .223.

    Like the bolt hold open feature.. if nothing else for 'show clear" at the range, instead of using a spent shotshell.
  5. son of a gun

    son of a gun member

    I want to clear a few things up this isn't my idea it's ""Blackjackbuffers"
    Idea a guy I converse with on an SKS board, HR is a great place for intellectual discussion so I posted it to see what your opinions on it.:cool:
  6. Dr.Rob

    Dr.Rob Moderator Staff Member

    Well tell him for us. And get him over here on our boards!
  7. boing

    boing Well-Known Member

    A little Dremelin' and some cold blue and you can be bolt-holding till the cows come home. Locking the bolt can be done one-handed, and it chambers a round when the selector is pushed down.



  8. son of a gun

    son of a gun member

    Here's Randy Blackjacks alternate design.

  9. WonderNine

    WonderNine member

    The only reason I would pay $30 for one is if it held the bolt open on the last shot.

Share This Page