1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Building an M1A yourself? Where to find parts

Discussion in 'Rifle Country' started by Snaps, Sep 9, 2004.

  1. Snaps

    Snaps Member

    Dec 31, 2002
    I'm going to do this one as a project for a friend on mine. Sort of the sniper setup like the whitefeather.. Where on earth would i look for a reciever for the thing and parts? Anybody know a good company?

    With ARs it's easy to find companies who make it, but this isn't going as smoothly.
  2. TAG2501

    TAG2501 New Member

    Aug 15, 2004
    Dallas TX
    Check on the battlerfiles.com and M14 firing line sites - they have threads that focuses exculsively on the M14/M1A.

    Fulton armory and LRB both make solid receivers. SAMCO and Numrich both have had M1A receivers in their catalogs at one point. At this point Fulton may be the best choice, but will most likely be the most esxpensive also.

    I'd suggest posting on the M1A forum and see what you get there.
  3. Trebor

    Trebor Senior Member

    Feb 15, 2003
    M-14 parts have really dried up the last few years. Expect to pay MORE to assemble a rifle from parts then if you bought one complete. It'll take longer to get all the parts as well. It can still be done, but it'll take some work.
  4. fissionproducts

    fissionproducts New Member

    Dec 24, 2003
    Lincoln Nebraska USA
    I was told building the M1A/M14 is difficult

    I was considering building an M1A as well thinking it might be as easy as building an FAL. I was told however that it is significantly more challenging as you will need specific USGI tools to assemble the rifle. Supposedly these tools are not easy to find. Also barrel timing and headspacing are a challenge. I would either buy a complete rifle or ship the parts to a good gunsmith with M14/M1A experience for assembly

Share This Page